CCM 2 Meter RC Slope Glider Build Part 3

4 years ago
16

Let's build a CCM Toy 2M slope glider!
In part one we will install flap servos and wrap up the build.

Servos - KST X08H Plus https://flightcomp.com/collections/ks...

Link to 2mm linkage- https://flightcomp.com/collections/rc-metal-bitz-hardware

CCM website- https://ccm.in.ua/en/

Flight Comp- https://flightcomp.com/collections/sl...

Full blown F3F machine shrunk down into a 2 meter package!

New for 2019 from CCM in Ukraine. The Toy 2m can slope, thermal, race, or just sport fly! Available in two versions, spread tow and standard carbon. The spread tow version is lighter and suitable for light to medium slope lift. Swap out the 5 degree wing joiner for the 10 degree joiner and go hunt down some thermals!

The standard carbon Toy is heavier and stiffer and more suited for strong slope lift with max ballast loads.

High level of prefabrication and quality second to none! The wings and fuselage have wire harnesses installed and carbon pushrods installed. Unique "solid core" style hingle line on all surfaces means you won't jam pesky epoxy wipers in top wings skins. If you want gap seals just use tape, really simple! Brass control horns pre-installed in wind surfaces and ball joints pre-installed in V-tails.

Capable of taking 250 grams of brass ballast in the wings.

We recommend the following servos-

Fuse- KST X08H V5

Ailerons- KST X08H V5 or X08H Plus

Flaps- Blue Bird 115HV or MKS 6110 ( X10 mini may fit but would be very tight!)

Specs-

Length- 1153 mm

Wing Span- 2000 mm

Wing Area-32.4 dm2

Wing Airfoil HN352 Mod

Tail Area- 3.72 dm2

Tail Airfoil HT08 Mod

2 Sets of wing joiners, 5 degree and 10 degree

Ailerons, Flaps, Rudder, Elevator- 6 Channel control

Ballast capable, includes 4 brass slugs (250 g total)

All protective covers included

Loading comments...