Premium Only Content

Finished the knife sheaths and sharing some things I've learned along the way.
For the longest time, fitting the 1/4 inch pins, through the 1/4 inch holes drilled through the steel and both sides of the handle was way more difficult than it should be. To remedy it, I started taking a 1/4 inch bit and wiggling it around a bit with the drill turning in the hole. That worked somewhat but left oblong holes that epoxy would seep into and looked awful. The reamer solved all those problems.Another thing I learned was that the wood needed to be 100% square when drilling through it for the pins. Now, before I even mix the epoxy, I do a couple of assembly dry runs just to be sure it will all go well when I spread the epoxy on the knife and handles.
If you like my videos, this is one way you can help the channel. I'm an Amazon Affiliate and I get a small fee if you shop through my link. https://amzn.to/36WZOs1 Thanks!!
-
LIVE
StoneMountain64
46 minutes agoBest Extraction shooter is FINALLY on Console (+CoD Reveal Today)
68 watching -
LIVE
Right Side Broadcasting Network
4 hours agoLIVE: White House Press Secretary Karoline Leavitt Holds a Press Briefing - 8/19/25
5,785 watching -
1:03:48
Timcast
2 hours agoGavin Newsom SURGES In Polls, COPIES Trump's Style
99.6K52 -
4:37
Michael Heaver
7 hours agoBusted France Faces UPRISING
383 -
10:45
Dr. Nick Zyrowski
1 day agoDoctors Got It Wrong! This Causes of Obesity - NOT Sugar
5.7K6 -
LIVE
The Charlie Kirk Show
1 hour agoSummit Aftermath + America's Energy Revolution + Where Russiagate Will Lead | Wright, Solomon
3,574 watching -
2:00:15
Steven Crowder
4 hours agoTrump's Huge Meeting Shocks the World & the Media is Dumbfounded
246K171 -
LIVE
Viss
1 hour ago🔴LIVE - How to Consistently Win in PUBG!
110 watching -
LIVE
GloryJean
3 hours agoSniping & Dominating Solos 🖱️ 6.7 K/D
28 watching -
1:40:15
Nikko Ortiz
3 hours agoLive - Gun Shot And Gun Fails
31.1K4