Metal Finishing a 1933 Ford Fender

https://www.proshaper.com
Our Amazon Storefront:
https://www.amazon.com/shop/proshaper

Metal Finishing a 1933 Ford Fender

In this video Wray shows us how he takes out the small dents on these 1933 Ford Fenders. First he had to sand off all the primer which helped show the low and high spots. He will also use Dykem if the dented area is large but will use a magic marker for smaller areas.

Then he will use a file to file down the dykem, revealing the areas that he has to chase with a slapper and dolly. After he will take the 5" shrinking disc and a spray bottle of soapy water then run it over the area of the fender to bring the high spots down.

There is still work that needs to be done on the front fender section but with some planishing and patience it will be good as new!

Email: Wray@Proshaper.com
Website: https://www.proshaper.com
Facebook: https://www.facebook.com/ProShaper/
Instagram: https://www.instagram.com/proshaper/
Twitter: https://twitter.com/ProshaperM
Linkedin: https://www.linkedin.com/company/pros...