C band & KU band LNBF For a #FreeSatelliteTV aka #FreeToAir Satellite Dish

The Happy Satellite Nerd Episode 103

Get the best of both worlds on one dish with a C band and KU band LNBF Free to Air television.

Unable to find this model of C/KU lnb but you can get them from Tek2000

https://www.facebook.com/commerce/products/3151930144936695/?rid=682787588964078&ad_id&rt=1&refID=0&refType=0&preview_image_id=3568694869849914&__tn__=H0%2CW0HHH-R

You should have the following parts in addition to the main body of the BSC621-2 C/Ku LNBF.

1. The Scalar Ring, used to mount the BSC621-2 to your dish. You will notice it has holes that allow you to use 4 support arms or 3 support arms depending on your dish. There is a package of bolts that mount the dish arms to the scalar ring. It includes the bolt that mounts the BSC621-2 to the scalar ring.
2. The di-electric plate is
used for circular signals. It converts your linear polarity to circular.
3. The Coax Jumper is used to connect the Ku part of the BSC621-2 to the
switching device located on the side of the BSC621-2.
This diagram shows how to connect the Ku and
C-band so it can be delivered down one coax.
Looking at the diagram, you will see the Ku
connection is at the end of the BSC621-2. Using
the Coax Jumper, connect it to the port marked
“LNB” on the side of the BSC621-2. Connect the
coax that delivers signal to your receiver to the
remaining port, marked “RCV”.
The band switching is accomplished by DiSEqC
control sent from your receiver. Setting your
receiver DiSEqC to #1 or A will give you C-band,
and setting your receiver DiSEqC to #2 or B will
give you Ku-band.Properly installing the LNBF on your dish is critical. After attaching the scalar ring
to your support arms, you should confirm that it is pointing to the center of your
dish. One way to do this is to measure from the edge of your dish to the edge of
the scalar ring in several places around your dish. These measurements should
be the same. If not, your feed is not pointing to the center of your dish and will
not perform as intended.
After finding a signal, turn the LNBF to find the best polarity performance. Do
this on both polarities. Carefully move the LNBF toward the dish and away from
the dish to find the best operating distance.
After finding the best possible performance tighten the set screw to hold the LNBF
in place.
The BSC621-2 has the ability to receive circular polarized signals.
Remove the end cap from the LNBF.
Insert the di-electric plate in the throat

guides. Replace the end cap.

Buy one on Ebay
https://www.facebook.com/commerce/products/3151930144936695/?rid=682787588964078&ad_id&rt=1&refID=0&refType=0&preview_image_id=3568694869849914&__tn__=H0%2CW0HHH-R

Come and voice chat over at Discord and call in!
https://discord.gg/eCUw7xw (I fixed it)
Space x Star link Satellite Internet #StarLink #StarlinkSatellite

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Need a VPN
Using the Express VPN Service Please Sing up here and Click on my referral link.
https://www.linkev.com/?a_fid=freesatellitetv
+++++++++++++++++++++++++++++++++++++++++++++++++++++++

If these Videos help you please consider suporting my work
https://www.paypal.com/donate/?token=QKzEirXJqq0FTbnGEmr3zZUYnrEJk9b7E5JktI6qe_RWThkac4gqudDIUwhd7Ugo-cMjfm&country.x=CA&locale.x=CA

https://www.patreon.com/RobbieStrike

Learn about Satellite and other things by sitting back and binging on these playlists

https://www.youtube.com/user/ottawaoctane/playlists

Buy This Stuff - https://www.facebook.com/pg/FreeSatelliteTV1/shop

https://www.youtube.com/user/ottawaoctane/videos

https://www.facebook.com/RobbieStrikeVideos/

https://twitter.com/robbiestrike3

(c) Robbie Strike 2020 http://www.RobbieStrike.com

www.FreeSatelliteTV.net