Sunlu S8 - Upgrading to become a King

Save
3 years ago
9

Uni-T: https://www.thingiverse.com/thing:5316355
Direct Drive (For BMG Clone): https://www.thingiverse.com/thing:5144422
Bed Spacer: https://www.thingiverse.com/thing:4675309

3D/BLTouch KiNG Direct Drive Firmware: https://drive.google.com/file/d/1AEdmmeeq_-lG5867IiWT-mP7etIDjnQk/view?usp=sharing
Drivers and XLoader for Flashing: https://drive.google.com/drive/folders/1Jzxf4_AcXUhLBzcOa3Hr5opASIY8treC?usp=sharing

BMG Clone Dual Drive Extruder: https://amzn.to/3KMpCvn
3D Touch Auto Bed Leveler: https://amzn.to/3EhRsNA
Pancake Stepper Motor: https://amzn.to/3vFxgld
2M 5 Pin Ribbon Cables: https://amzn.to/3L2U4Sp

Precision Screwdriver Set: https://amzn.to/3rvfCz1
2 meter USB Cable for Printer: https://amzn.to/37VFMnS
M3 Screw Kit: https://amzn.to/3uSsPnA
**Used 2 M3x20mm screws for Uni-T Shroud to connect to hot end
**Used 6 M3x6mm screws to put Uni-T Shroud together
**Could use 6 M3x12mm screws for putting fans on, or reuse existing screws

Sunlu S8 Pro: https://amzn.to/3rTMqBY
Sunlu S8 Plus: https://amzn.to/3ER9436

Starting and Ending GCode for Automatic Bed Leveler (3DTouch, BLTouch, CRTouch):

Starting G-code:
G28 ;Home
G92 E0 ;Reset Extruder
G1 E-1 F2700 ;Retract a bit
G29 ;abl
G92 E0 ;Reset Extruder
G1 Z1 F3000 ;Move Z Axis up
G1 X300 Y300 Z0.4 F5000.0
G1 X300 Y25 Z0.32 F1500.0 E30
G92 E0 ;Reset Extruder
G1 E-1 F2700 ;Retract a bit
G92 E0 ;Reset Extruder
G1 Z1.0 F3000 ;Move Z Axis up

Ending G-code:
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning
G1 X0 Y{machine_depth} ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z

Join this channel to get access to perks:
https://www.youtube.com/channel/UCwj5YIlgpLRQdBQHV9RfkwA/join

Loading comments...