40' Telescoping Light Mast - 9'-40' Seven Stage Aluminum Light Tower - 66lb Payload - Electric Winch

https://www.larsonelectronics.com/product/265409/40-telescoping-light-mast-9-40-seven-stage-aluminum-light-tower-66lb-payload-electric-winch

Made in Texas at Larson Electronics!

The LM-40-9-7S-AL-EW from Larson Electronics is a Crank Up 7-Stage Aluminum Light Mast with Electric Winch that provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations up to forty feet. This light tower collapses to nine feet for easy transportation, features an electric winch for deployment, and a removable mast head for storing mounted equipment when not in use.

This telescoping eight stage aluminum light mast from Larson Electronics is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 40 feet for effective coverage. This light boom can be extended to 40 feet for maximum area coverage and collapsed to 9 feet for applications where a footprint smaller is required. The tower is constructed of aluminum tubing with a with a base stage diameter of 6.3" and top stage diameter of 2". The mast is extended to its full height using an electric winch with steel cable. The winch is available in either a 120 V or 240 V, 60 Hz configuration. Please make your selection below when ordering.

The LM series of towers are powder coated with glossy finish for corrosion resistances and aesthetics. These light masts are typically mounted to trailers or other stable surfaces via an 6" x 6" base-plate which has been drilled to accept four 1/2 inch anchor bolts. A 44" wide and 1/8" thick mounting T head is attached to the upper section of the mast which provides a strong and stable platform for fixtures.

The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. When lowered to 14 feet, the mast can withstand winds up to 65 mph.

The electric winch on this mast is offered in 120V or 240V AC 50/60 HZ. Additional voltage options are available at an additional charge. Larson Electronics can offer single phase and three phase AC winches, or low voltage DC winches.

This light tower weighs approximately 300 lb, can easily support and lift 66 lbs of cameras, lights, and/or equipment. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 10 feet long, 2 feet wide, 2 feet tall and weighs approximately 400 lb. Larson Electronics can custom tailor these units to the customer`s requirements with longer sections and larger mounting plates.

Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E, LEDLB-160X2E or LEDLB-80x2E.

Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1