Painting My Firewire GoFish Surfboard

3 years ago
4

No more Firewire yellow. There wasn't much surf today so I decided to spend the afternoon painting my Firewire GoFish.

Steps:
1) Sand - 230 grit
2) Clean - wiped it down with a water rinse and some Denatured Alcohol.
3) Mask - taped off pin stripe and bottom black stringer line.
4) Paint - 4.5 coats of the burgundy
5) Took off some of the tape and re-masked fin box, holes only
6) Clear Coat - 5 coats of clear coat
7) Took off all tape will give it a light sand with 600 grit so it doesn't look shiny

One regret, I wish I had left a white pinstripe on the rail like I did on the bottom line.

Let me know what you think of it.

#firewiresurfboards #robmachado #firewiregofish
#surfboards #robmachadosurfboards

Loading comments...