Genius way to make a guitar hanger! DIY woodworking project

I consider this guitar stand one of my favorite projects so far, the combination of mahogany with aluminum is one of my favorites, I sanded the wood with 100, 180, 300, 600, 1000 and 2000 grit sandpaper to achieve a better contrast, I also sanded the aluminum before bending it with 600 grit, I made the jig to bend the pieces with a clamp (as a lever) that already had two ideal holes for this, and some screws, I also tried to make the pieces with an aluminum rod, but I wasn't able to bend it with this homemade jig, so I recommend using aluminum tube, the finish I used is an oil with a slight brown tint, the glue I use is general purpose epoxy.

This is a very cheap, and easy project ideal for anyone. The only thing I recommend is to measure the neck of the guitar you use, I also leave the plans at the end of the video.