How to Replace the Track on a Zodiac CyclonX CX20 Robotic Pool Cleaner

How to Replace the Track on a Zodiac CyclonX CX20 Robotic Pool Cleaner

1.
Stand the cleaner on its side
2.
Starting at one of the wheels, pull on the inside
of the track to separate the tire lip from the
wheel. Remove the track from
the cleaner.
3.
To install a new track, place the inside rib of
the track into the groove in the first wheel.

4.
Stretch the track around the second wheel, then
pull over the last wheel. Push
and position the rib of the track so that the track
is seated properly in the groove of the wheel.
5.
Verify the rib of the track is positioned properly
within the groove of each of the three wheels
and under the track guide. If necessary, turn the
wheels gently to seat the track.