3 years ago

In this video, we add our ActiveX numeric input into the pop-up
screen for the pump 1 speed controls using FactoryTalk View Studio Site Editon version 10.

After we add the ActiveX element then we test the use of the ActiveX numeric input using the HMI client to help everyone understand the full use of this object.

Using ActiveX controls in FactoryTalk View Site Edition is close to the same when using them but different when it comes to the ActiveX install.

Note: all videos in this series are timeline to help you find the topics quickly & are designed to be helpful.

Whole playlist:
https://www.youtube.com/watch?v=yUbYDRXhSzE&list=PLv8KkQpb5K0jVq56UnvkQ1q_oWvX3kQg5

If you haven't seen the videos leading up to this then feel free to subscribe to this playlist & watch all that we are teaching here.

Teaching:
✔️ PLC programming using Studio 5000
✔️ HMI programming using FactoryTalk View Studio SE
✔️ System communication using RSLinx classic

Here are the previous video leading up to this one:
Video 1: https://youtu.be/yUbYDRXhSzE
Video 2: https://youtu.be/GQnJqaG2nUY
Video 3: https://youtu.be/RQ1imx0X3Ik
Video 4: https://youtu.be/hNuXeEklzb4
Video 5: https://youtu.be/2P2HjrYnaLo
Video 6: https://youtu.be/w7uHMucqAQ0
Video 7: https://youtu.be/JnZ14DXm9UI
Video 8: https://youtu.be/VQyA0uTtYts
Video 9: https://youtu.be/lPl5g9H6Vi0
Video 10: https://youtu.be/J7vNjSqsCro
Video 11: https://youtu.be/zqodvKKeXFk
Video 12: https://youtu.be/_P18ASCa_hs
Video 13: https://youtu.be/f7KZqCABrio
Video 14: https://youtu.be/os_Oe6jzbJ0
Video 15: https://youtu.be/ALqXplh-qlo
Video 16: https://youtu.be/Hh1Ymqwq7-w
Video 17: https://youtu.be/rlk4KiXnWRM
Video 18: https://youtu.be/w4IB-3PLbdQ
Video 19: https://youtu.be/c6QeTis6ZhU
Video 20: https://youtu.be/zErnM5yGi2U
Video 21: https://youtu.be/vrq8mUiFoH0
Video 22: https://youtu.be/KN9I4oBXkto
Video 23: https://youtu.be/Lhn4uVpK7qI
Video 24: https://youtu.be/JNCiZY3E280
Video 25: https://youtu.be/7QdxWrlnQo8
Video 26: https://youtu.be/rFCYKcjvtXM
Video 27: https://youtu.be/EjWJZmDilpg
Video 28: https://youtu.be/992OK1yOslY
Video 29: https://youtu.be/ikQbsn8aqXg
Video 30: https://youtu.be/A5Ga0UxedlY
Video 31: https://youtu.be/irDuNgGaRzc
Video 32: https://youtu.be/k4Fu5hFXpPQ
Video 33: https://youtu.be/8ynLv7jvduA
Video 34: https://youtu.be/EQYJUKEv6rQ
Video 35: https://youtu.be/Vo06Ddee030
Vidoe 36: https://youtu.be/kT0uHAYVvME

Video Content:
0:00 Quick Intro
0:46 ActiveX Numeric Keypad FTView SE
2:10 Numeric Keypad Control for RSview32 Properties
2:40 Using a Decimal value
3:30 Numeric Keypad connections tab
5:10 Using Touch Animation To Open Pop-Up Screen
5:40 HMI Client Testing Numeric Keypad
6:30 Ladder Logic Overview for the pump
7:50 Testing Using HMI Client
8:50 Replacing Visibility Animation
9:40 Testing Visibility Animation with HMI Client
11:20 Using a Standard Numeric Input
12:00 Testing the Numeric Input with HMI Client
13:10 Recommended Video For You

Thank you for watching.

We are teaching this project from scratch to give a clear understanding to help everyone we can with plc logic controls & HMI controls.

I hope it helped.

Thank you for watching the video.

Learn, Implement, Succeed

If you are interested in getting serious about your knowledge & learning how to better your career then check out our training center.

Visit: https://www.allen-bradley-plc-training.com/

#FactoryTalkViewSE #NumericDisplay #ActiveX

Loading comments...