2006 Land Rovr LR3 V8 Project (Part 7) "Will it overheat again?"

We continue the cooling system overhaul on our 2006 Land Rover LR3. With the intake manifold removed, we replaced the complete thermostat housing and the hose under the manifold. We then re-install the intake manifold, replace the radiator, all of the cooling hoses. After everything is back together, we do a vacuum test on the cooling system which it passes. Then will fill it with coolant and go for our first successful test drive. We finish off with a suspension & traction test on a new off-road test area we are designing. Unfortunately the engine is lacking low end torque and the traction control doesn't seem to be working properly. We've replaced the MAF sensor due to a fuel trim code, but we are still getting the fuel trim code. So that will be our next issue to troubleshoot.

Music: "www.bensound.com"