2006 Land Rovr LR3 V8 Project (Part 7) "Will it overheat again?"
We continue the cooling system overhaul on our 2006 Land Rover LR3. With the intake manifold removed, we replaced the complete thermostat housing and the hose under the manifold. We then re-install the intake manifold, replace the radiator, all of the cooling hoses. After everything is back together, we do a vacuum test on the cooling system which it passes. Then will fill it with coolant and go for our first successful test drive. We finish off with a suspension & traction test on a new off-road test area we are designing. Unfortunately the engine is lacking low end torque and the traction control doesn't seem to be working properly. We've replaced the MAF sensor due to a fuel trim code, but we are still getting the fuel trim code. So that will be our next issue to troubleshoot.
Music: "www.bensound.com"
-
17:09
Mountain Views Garage
1 year ago1957 Ford Ranchero Project (Part 3) "Fixing the Coolant Leak"
8 -
16:47
Mountain Views Garage
2 years ago2007 VW TOUAREG 3.6 V6 PROJECT (PART 2) "IT CATCHES ON FIRE"
38 -
17:02
Mountain Views Garage
2 years ago2006 LAND ROVER LR3 V8 PROJECT (PART 5) "Compression Test Time"
46 -
19:08
Mountain Views Garage
2 years ago2006 Land Rover LR3 V8 Project (Part 1)
47 -
17:29
Mountain Views Garage
2 years ago2006 LAND ROVER LR3 V8 PROJECT (PART 2) "IT'S STARTING TO MAKE SENSE"
33 -
18:38
Mountain Views Garage
1 year ago2007 VW Touareg 3.6 VR6 Project (Part 8) "Finding The Issues"
10 -
17:59
Mountain Views Garage
2 years ago2006 LAND ROVER LR3 PROJECT (PART 3) "LR3 GETS AN UPGRADED SUSPENSION"
37 -
10:13
Rocket Garage and Service
7 months ago🔥 OVERHEATING FIXED ❄️!!! F-body problems
13 -
5:03
Living The Jeep Lifestyle
2 years ago $0.01 earned"Project FC-150" From Rust to Roller
203 -
38:12
Bob's Workshop
11 months agoProject OVERKILL - Making what SHOULD BE a $2 Part - Because I Can
145