C-More EA9 HMI Series Panel Communication and Updating Firmware
Establishing communication and updating the C-More firmware will be shown.
We will now put our first program into the C-More EA9 HMI Panel using the C-More programming software. The Do-more Designer Simulator will be used with a modified Start Stop Jog Circuit so we can use our HMI screen to monitor the output as well as control the inputs on the PLC.
Communications will be established to our C-More EA9-T10CL unit and the firmware will be updated. We will then develop our control for our PLC ladder logic circuit.
The PLC logic for our circuit can be found in our post: How to Make a Start / Stop / Jog Circuit in a PLC. Our C-More EA9 HMI Panel will be communicating to the PLC simulator via Ethernet with the Modbus TCP protocol. Let’s get started.
More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/c-more-ea9-hmi-series-panel-first-program
Establishing Communication and Updating Firmware Video
https://youtu.be/WTHw1p-iJFE
First Program Video
https://youtu.be/5c8ZsdK5dak
Previously we have discussed the following in our C-More HMI Panel:
System Hardware
https://accautomation.ca/c-more-micro-hmi-system-hardware
Unboxing and Review Video
https://youtu.be/_uCcALMqYlM
Powering the Unit
https://youtu.be/BIGrOvxlDTI
Installing the Software
https://accautomation.ca/c-more-ea9-hmi-series-panel-installing-the-software
https://youtu.be/6EnyUbEp4As
System Setup Screens
https://accautomation.ca/c-more-ea9-hmi-series-panel-system-setup-screens
https://youtu.be/tL6Ygr1BuDY
There are several reasons that we are using the EA9-T10CL C-More HMI Panel. Here are a few:
• Touch screen display (LCD) 280 NITS display brightness
• 10.4” diagonal color TFT (Thin Film Transistor)
• Analog resistive (1024 X 1024) touch screen allowing unlimited touch areas
• EA9-PGMSW programming software
• 800 x 600-pixel display
• 64K colors
• 50,000-hour average backlight half-life
• USB port B (program/download) and USB port A (USB device options)
• Ethernet 10/100 Base-T port (program/download & PLC communication
• Remote Internet Access
• Serial PLC interface (RS-232/422/485)
• One built-in SD memory card slot
• 12–24 VDC powered (18W), 110VAC power adapter (optional)
• Audio Line Out, stereo - requires amplifier and speaker(s)
• 26MB project memory
• Data logging
• 0 to 50°C [32 to 122°F] operating temperature range
• NEMA 4/4X, IP65 compliant when mounted correctly, indoor use only
• Slim design saves panel space
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase
-
5:44
AccAutomation
2 years agoC-More EA9 HMI Series Panel Installing the Software
6 -
11:02
AccAutomation
2 years agoC-More First Program - EA9 HMI Series Panel
8 -
16:52
Ham Radio CQ
3 years ago $0.05 earnedCar Ham Radio Install QYT 25 Watt 2M 70CM Radio (UPDATE)
1.04K7 -
9:26
How to install, maintain, and upgrade a home theater sysytem
2 years agoDenon 2020 Receiver HDMI Cable *RE*Test - Testing High Speed & older HDMI cables using New Firmware
39 -
14:35
Ham Radio CQ
3 years ago $0.05 earnedFire up the ICOM 7300 & HyEndFed HF Antenna
3092 -
15:27
MrMario2011
4 years agoHow to Update HFW & PS3HEN for Firmware 4.90!
-
18:12
Ham Radio CQ
3 years ago $0.07 earnedCar Ham Radio Install BTECH GMRS TX 50 Watt (2M 70CM RX Only) Radio
9274 -
13:37
Robbie Strike
3 years ago $0.01 earnedShortwave SDR - Software Defined Radio - HF Upconverter - MLA 30 - GQRX in Linux Mint
4641 -
49:31
TechCornerTV - Electronics, Projects & Tutorials
2 years agoHantek DSO2000 Oscilloscope ReTest After Firmware Upgrade ⭐ 2C10 / 2D10 / 2C15 & 2D15
37 -
19:20
DavesVintageAppleTech
2 years agoMODDING THE G4 CUBE INSTALLING A CNC AUTONOMOUS FAN CONTROLLER Part 13
83