C-More First Program - EA9 HMI Series Panel
We will now put our first program into the C-More EA9 HMI Panel using the C-More programming software. The Do-more Designer Simulator will be used with a modified Start Stop Jog Circuit so we can use our HMI screen to monitor the output as well as control the inputs on the PLC.
Communications will be established to our C-More EA9-T10CL unit and the firmware will be updated. We will then develop our control for our PLC ladder logic circuit.
The PLC logic for our circuit can be found in our post: How to Make a Start / Stop / Jog Circuit in a PLC. Our C-More EA9 HMI Panel will be communicating to the PLC simulator via Ethernet with the Modbus TCP protocol. Let’s get started.
c-more first program
More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/c-more-ea9-hmi-series-panel-first-program
Establishing Communication and Updating Firmware Video
https://youtu.be/WTHw1p-iJFE
First Program Video
https://youtu.be/5c8ZsdK5dak
Previously we have discussed the following in our C-More HMI Panel:
System Hardware
https://accautomation.ca/c-more-micro-hmi-system-hardware
Unboxing and Review Video
https://youtu.be/_uCcALMqYlM
Powering the Unit
https://youtu.be/BIGrOvxlDTI
Installing the Software
https://accautomation.ca/c-more-ea9-hmi-series-panel-installing-the-software
https://youtu.be/6EnyUbEp4As
System Setup Screens
https://accautomation.ca/c-more-ea9-hmi-series-panel-system-setup-screens
https://youtu.be/tL6Ygr1BuDY
There are several reasons that we are using the EA9-T10CL C-More HMI Panel. Here are a few:
• Touch screen display (LCD) 280 NITS display brightness
• 10.4” diagonal colour TFT (Thin Film Transistor)
• Analog resistive (1024 X 1024) touch screen allowing unlimited touch areas
• EA9-PGMSW programming software
• 800 x 600-pixel display
• 64K colours
• 50,000-hour average backlight half-life
• USB port B (program/download) and USB port A (USB device options)
• Ethernet 10/100 Base-T port (program/download & PLC communication
• Remote Internet Access
• Serial PLC interface (RS-232/422/485)
• One built-in SD memory card slot
• 12–24 VDC powered (18W), 110VAC power adapter (optional)
• Audio Line Out, stereo - requires amplifier and speaker(s)
• 26MB project memory
• Data logging
• 0 to 50°C [32 to 122°F] operating temperature range
• NEMA 4/4X, IP65 compliant when mounted correctly, indoor use only
• Slim design saves panel space
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase
-
6:48
AccAutomation
2 years agoC-More EA9 HMI Series Panel Simulate Project
10 -
19:28
AccAutomation
2 years agoC-More EA9 HMI Series Panel Object List Entry
2 -
8:02
Alarm Grid Home Security DIY Videos
8 years ago2GIG GC3: Sensor & Panel Programming
12 -
9:22
DavesVintageAppleTech
2 years agoTHE HP COMPAQ 610 LAPTOP MORE ESTATE FINDS
60 -
6:47
ALLCHECKOUT
1 month agoPrechen 12.3 Inch Touchscreen Secondary Monitor (Perfect As CPU/GPU Monitor) Review And Tutorial
17 -
19:23
System Control Tech
3 years agoJohnson Controls MUI Floor Graphics Set Up
13 -
19:20
DavesVintageAppleTech
2 years agoMODDING THE G4 CUBE INSTALLING A CNC AUTONOMOUS FAN CONTROLLER Part 13
83 -
5:53
Alarm Grid Home Security DIY Videos
9 months agoQolsys IQ Panel 4 - Using with Honeywell 5800 Series
19 -
10:16
System Control Tech
3 years agoThe basic steps of Johnson Controls MUI Dashboard Management
29 -
23:23
Dr. Bill - The Computer Curmudgeon
3 years agoDrBill.TV Special - ELECABLE PCIe 4-Port HDMI Video Capture Card Install and Test!
70