Motech Space is 3 years old! (+TVC update)
Well, that's my first unscripted video. Not perfect and too many "umms" and "uhhs", but not bad. What do you think?
Aaron from Motech Space vs Walter from DIY Aerospace coming soon!
#modelrockets #space #engineering
3
views
Building a Rocket out of PVC
Finally, the long awaited PVC rocket launched. I first started designing it 2 years ago, but it took me a while to actually start building it.
#modelrockets #space #rockets
4
views
How well does our homemade altimeter work?
We started building this altimeter 2 years ago and we launched it for the first time last year. Now we want to validate its data and make sure we can trust it in the future.
HOW TO BUILD: I do not have wiring diagram at the moment, but please look at the overview, instructions, and diagrams of the MPL3115A2 altimeter
MPL3115A2 diagram and overview: https://learn.adafruit.com/using-mpl3...
Instead of using the SCL and SDA pins on the arduino, you can just use the A4 and A5 pins
You can use any data logger, but you'll need to figure out how to wire it.
You should also use capacitors just to be safe.
When you actually get to logging data, I would recommend not logging pressure and temperature because they slow down the logging.
I put my code in github. It's a bit messy but it works: https://github.com/MotechSpace/Motech-Space-Altiemter
You'll also need the library I used: https://github.com/sparkfun/SparkFun_MPL3115A2_Breakout_Arduino_Library
0:00 Intro
0:38 Overview
1:15 Sorry Zeph
1:54 First launch
2:48 Second launch
4:21 Conclusion
#modelrockets #space
34
views
2
comments
Good test result for TVC component! (I built an even smaller Zephyr) #modelrockets #space
3d printed ejection charge baffles work! Good news for TVC testing.
Zephyr III used a 24mm tube, 3d printed nosecone, fins, and motor mount, and flew on a B6-4.
15
views
How our thrust vectoring rocket will work
We're getting closer to finally testing this rocket! This video is an overview of what will be on the rocket.
#modelrockets #space
3
views
100 SUBSCRIBERS!!! What's next?!?
Sorry for not uploading for so long but... WE GOT TO 100 SUBS!!! These are some of our plans for the future. This video took so long to make because of school. Honestly, it might be another few months until I upload again. Thanks for watching and subscribing!
Thanks to @DIY aerospace for the Mach Machine suggestion!
Apogee article: https://www.apogeerockets.com/education/downloads/Newsletter563.pdf
Wikipedia nosecone shape article: https://en.wikipedia.org/wiki/Nose_cone_design
Apogee Zephyr Jr. rocket: https://www.apogeerockets.com/Model-Rocket-Kits/Skill-Level-3-Model-Rocket-Kits/Zephyr-Jr
Openrocket simulator: https://openrocket.info
Timestamps:
0:00 Intro
0:25 Thrust Vector Control
2:30 Altimeter & Zephyr Jr.
4:06 PVC Rocket?!?!?
5:21 MACH MACHINE!!!
8:42 Outro
#modelrockets #space
9
views
Redesigning our Thrust Vectoring Mount
Our last design was kinda bad so we redesigned it. We should have a fully built prototype really soon!
#modelrockets #space
9
views
A TVC update!!!
Finally a TVC update! Make sure to subscribe because we'll have lots of updates and design changes in the next few months.
Check out our website for more information on Motech Space and our rockets: https://aaroneliahu.wixsite.com/motec...
Contact us: https://aaroneliahu.wixsite.com/motec...
11
views
Figuring Out Why the Fins Broke Off Mach Machine then Making it Better
Will we finally figure out why the fins broke off and what can we do to improve the rocket?
Check out our website for more information on Motech Space and our rockets: https://aaroneliahu.wixsite.com/motechspace
Contact us: https://aaroneliahu.wixsite.com/motechspace/contact
11
views
Breaking the Sound Barrier with Spare Parts
This was such a fun challenge. I should do this again soon
Rocket club: http://lunar.org
Apogee Newsletter: https://www.apogeerockets.com/educati...
Check out our website for more information on Motech Space and our rockets: https://aaroneliahu.wixsite.com/motec...
Contact us: https://aaroneliahu.wixsite.com/motec...
#modelrockets #space
16
views
Building a Supersonic Rocket and Flying It
I've always wanted to build a supersonic rocket but I haven't until now.
LUNAR club: http://lunar.org
Check out our website for more information on Motech Space and our rockets: https://aaroneliahu.wixsite.com/motec...
Contact us: https://aaroneliahu.wixsite.com/motec...
#modelrockets #space
25
views
Flying a Reload Motor for the First Time (Apogee Aspire on Cesaroni F36)
To get into high power rocketry, it's a good idea to get into reload motors. This was our first time using a reload!
Happy Valentine's Day! ❤️
Aspire rocket: https://www.apogeerockets.com/Rocket-Kits/Skill-Level-2-Model-Rocket-Kits/Aspire
Check out our website for more information on Motech Space and our rockets: https://aaroneliahu.wixsite.com/motechspace
Rumble: https://rumble.com/user/motechspace
Contact us: https://aaroneliahu.wixsite.com/motechspace/contact
#modelrockets #space
39
views
1
comment
Finally Launching our Homemade Altimeter Again
Finally, we got data! We will preform a few more tests to validate this data and the altimeter in the near future. Stay tuned!
Rocket club (LUNAR): http://lunar.org
Zephyr Jr. rocket: https://www.apogeerockets.com/Model-Rocket-Kits/Skill-Level-3-Model-Rocket-Kits/Zephyr-Jr
Check out our website for more information on Motech Space and our rockets: https://aaroneliahu.wixsite.com/motechspace
Youtube: https://www.youtube.com/channel/UCJBhJOnFYprU3_8H1LV2SZg
Contact us: https://aaroneliahu.wixsite.com/motechspace/contact
#modelrockets #space
35
views
1
comment
Flying our Homemade Altimeter on a Rocket for the First Time (Apogee Zephyr Jr.)
This was our first time flying electronics on a rocket!
Rocket club: http://lunar.org
Zephyr Jr. rocket: https://www.apogeerockets.com/Model-Rocket-Kits/Skill-Level-3-Model-Rocket-Kits/Zephyr-Jr
Youtube: https://www.youtube.com/channel/UCJBhJOnFYprU3_8H1LV2SZg
50
views
Fuse Testing Pt. 3
This was a very important test. Did it succeed and will we launch Falconry 1 one more time, or did it fail and will we give up? Happy New Year! 🥳
I was a little sick while making this video so excuse me if you feel the video was a little rushed.
Youtube: https://www.youtube.com/channel/UCJBhJOnFYprU3_8H1LV2SZg
59
views
Fuse Testing Part 2 + Burning an Astros Hat Again
This is our second try of igniting a second stage model rocket engine with our homemade fuse.
Check out our website for more information on Motech Space and our rockets: https://aaroneliahu.wixsite.com/motechspace
Contact us: https://aaroneliahu.wixsite.com/motechspace/contact
#modelrockets #space
20
views