gunplahrazzi

Unboxing

@gunplahrazzi all social media The GAT-X207 #Blitz #Gundam is a #mobilesuitgundam Suit introduced in Mobile Suit Gundam SEED and piloted by Nicol Amalfi The GAT-X207 Blitz Gundam is developed for the purpose of conducting surprise attacks deep behind enemy lines. It is the only unit among the five prototypes created under the Alliance's G Project to use the X200 series frame that is designed to support special systems. In this case, the Mirage Colloid Stealth System that renders Blitz invisible to both sensors and the naked eye. The suit is painted mainly black to enhance the effectiveness of the stealth system and is fitted with other systems to ensure the silent operation of internal mechanisms and systems, as well as to control the heat dissipation while cloaked. Like the other four units, Blitz is also equipped with Phase Shift armor system, but unlike them, it does not have any built-in weaponry like the CIWS. Its armament are all arm-mounted and consists of a grappling claw and an offensive shield system, which mounts both melee and range, beam as well as non-beam weapons. On January 25, C.E. 71, the Blitz, along with three other mobile suits of the project, the GAT-X102 Duel Gundam, the GAT-X103 Buster Gundam, and the GAT-X303 Aegis Gundam were stolen by ZAFT, with Nicol Amalfi becoming its designated pilot.[2] Together with his comrades, Nicol used his suit to pursue the Archangel so as to capture the last G Project machine, the GAT-X105 Strike Gundam. During the Archangel's stay in the Eurasian Federation-controlled Artemis asteroid, Nicol used the Blitz's Mirage Colloid system to infiltrate the asteroid base, successfully bypassing the "Umbrella of Artemis" and severely damaging the facility.[3] The Blitz later participated in the Battle of Orbit against the Earth Alliance's 8th space fleet with the other three stolen Gundams, destroying several TS-MA2 Moebius units and a Nelson-class battleship.[4] In March, the Blitz was sent to Earth with the Aegis and assigned to the Zala Team. The team then launched an attack on the Archangel in the Third Equatorial Skirmish, where the Blitz was knocked off its Guul sub-flight lifter by the GAT-X105+AQM/E-X01 Aile Strike Gundam.[5] In mid April, the Blitz lost its right arm in combat with the GAT-X105+AQM/E-X02 Sword Strike Gundam during the Battle near Orb. Despite the damage, Nicol still had it charged towards the Sword Strike to protect the Aegis, piloted by his friend Athrun Zala. However, it ended up running into the Sword Strike's anti-ship sword, killing Nicol, with the Blitz exploding soon after. ... Subscribe to my YouTube Link in my Bio I’m honored you took the time to look at my Content Follow @gunplahrazzi @gunplahrazzi #ガンプラ #ガンプラ好きな人と繋がりたい #ガンプラは自由だ #ガンダム #ガンダム好き #ガンダム女子 #ガンプラ楽しい #プラモデル #ガンダムのプラモデル #ガンプラ写真 #バンダイ #機動戦士ガンダム #ヤクトドーガ #gundam #gunpla #gunplabuilder #gunplacommunity #gundamphotography #plasticmodel #bandai #mobilesuitgundam #gunplacustom #bandai #gundamtheorigin #mecha #gunplahrazzi #creativereels

The GAT-X207 Blitz Gundam is a Mobile Suit introduced in Mobile Suit #Gundam SEED and piloted by Nicol Amalfi. 1/100 Blitz Gundam boxart.jpg JAPANESE NAME 1/100 #ブリッツガンダム CLASSIFICATION 1/100 Gundam SEED Model Series The GAT-X207 Blitz Gundam is developed for the purpose of conducting surprise attacks deep behind enemy lines. It is the only unit among the five prototypes created under the Alliance's G Project to use the X200 series frame that is designed to support special systems. In this case, the Mirage Colloid Stealth System that renders Blitz invisible to both sensors and the naked eye. The suit is painted mainly black to enhance the effectiveness of the stealth system and is fitted with other systems to ensure the silent operation of internal mechanisms and systems, as well as to control the heat dissipation while cloaked. Like the other four units, Blitz is also equipped with Phase Shift armor system, but unlike them, it does not have any built-in weaponry like the CIWS. Its armament are all arm-mounted and consists of a grappling claw and an offensive shield system, which mounts both melee and range, beam as well as non-beam weapons. The Blitz Gundam is one of five mobile suits created by the Earth Alliance under its G Project during the First Alliance-PLANT War. Together with the other four units, it was stored secretly in the Orb Union controlled space colony Heliopolis. On January 25, C.E. 71, the Blitz, along with three other mobile suits of the project, the GAT-X102 Duel Gundam, the GAT-X103 Buster Gundam, and the GAT-X303 Aegis Gundam were stolen by ZAFT, with Nicol Amalfi becoming its designated pilot.[2] Together with his comrades, Nicol used his suit to pursue the Archangel so as to capture the last G Project machine, the GAT-X105 Strike Gundam. During the Archangel's stay in the Eurasian Federation-controlled Artemis asteroid, Nicol used the Blitz's Mirage Colloid system to infiltrate the asteroid base, successfully bypassing the "Umbrella of Artemis" and severely damaging the facility.[3] The Blitz later participated in the Battle of Orbit against the Earth Alliance's 8th space fleet with the other three stolen Gundams, destroying several TS-MA2 Moebius units and a Nelson-class battleship.[4] In March, the Blitz was sent to Earth with the Aegis and assigned to the Zala Team. The team then launched an attack on the Archangel in the Third Equatorial Skirmish, where the Blitz was knocked off its Guul sub-flight lifter by the GAT-X105+AQM/E-X01 Aile Strike Gundam.[5] In mid April, the Blitz lost its right arm in combat with the GAT-X105+AQM/E-X02 Sword Strike Gundam during the Battle near Orb. Despite the damage, Nicol still had it charged towards the Sword Strike to protect the Aegis, piloted by his friend Athrun Zala. However, it ended up running into the Sword Strike's anti-ship sword, killing Nicol, with the Blitz exploding soon after.[6]

instagram @Gunplahrazzi Painted kit for @ryankinel-rkoutpost4989 I love seeing this kit behind him as his does most of his video and LIVE stream I was Honored to commission this kit for him #ryankinel Brand Moebius Theme Comic,Characters Material Plastic Color Green Cartoon Character Green Lantern About this item A brand-new Aurora-style kit Retro-style packaging Box art by Terry Beatty In scale with other Aurora comic kits Paint and glue needed for final assembly A brand-new Aurora-style kit, starring one of #dccomics most popular characters. Imagine if Aurora produced a #greenlantern kit to go with their line of DC Comics kits back in the 1960's. We think this is close to what they would have done. Retro-style packaging, box art by Terry Beatty, and in scale with other Aurora comic kits make this the perfect addition to any plastic builders collection. Paint and glue needed for final assembly, recommended for ages 15 and up.