Gundson Moza Air 2 Gimbal with Sony A6500 Review
I review a new Gudson gimbal- and try it out at a Shenzhen craft beer festival.
Sponsor me, get early access and support my work (but only if you can without hardship)😘:
8
views
Shenzhen Lockdown and Mass Testing!
*Turn on subtitles for translation by clicking [CC]* My city is on lockdown! All 17 million residents will be PCR tested three times in the next seven days and are being asked to stay home. All public transportation and most businesses are closed. I go for a walk and see what all that means and how it's being implemented.
*Do not yell at me in the comments, I'm not defending or promoting anything, it's just how it's done here in Shenzhen. If you don't want to do it where you are that's fine. Don't shoot the camerawoman. If I was being paid to do this I would have a lot fewer financial problems. There aren't a lot of people on the ground here in a position to communicate with the outside world and I'm just trying to show what's going on.*
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
8
views
Coronavirus Update- I'm Under Quarantine!
I flew back to Shenzhen- but I'll be in quarantine a while due to the COVID-19 virus.
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
13
views
Wearable Headcam- Ordro EP7, Unboxing and Review
Kim helps me test the Ordro EP7 a 4k wearable camera with an integrated gimble. This video was made possible by my generous sponsors at JLCPCB.Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
9
views
Unboxing the Rugged Doogee S95 Pro Modular Smartphone
I check out a tough smartphone with add on modules.
I check out a tough smartphone with add on modules.
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
11
views
My Go-Bag/Emergency Phone- the Ulefone Power Armor 13
Sometimes your daily phone isn't the best phone for when things go bad- I discuss why, what factors go into choosing an emergency smartphone, and why my pick is the Ulefone Armor 13.
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
12
views
HJM All Terrain Electric Fat Bike- Husky Test Drive and Review!
I unbox and assemble the Toury Step-Thru Electric Bike- and then take it out for a Shenzhen test drive with my husky Momo! *Click CC to turn on subtitles!*
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
12
views
Guangzhou Street Food and 80's Retro Chinese Hotel 360º
Nice nighttime street scene in Guangzhou, then I show you the Hoi Fong Express- a cool little Wong Kar-wai inspired retro hotel I discovered.
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
20
views
Thermal Camera Smartphone- the Blackview BV9900 Pro!
I unbox and review the Blackview BV9900 Pro, a really cool smartphone with a built-in thermal camera. Then I take it out to test over some beer and BBQ😋
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
23
views
Discount Dystopia! $50 Face Recognition Security System
I test out a face recognition NVR I bought on Aliexpress- does it really work in the real world?
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
13
views
Creeps Trying To Get Into My Hotel Room! Do Travel Locks Work?
My girlfriend🏳️🌈 Kaidi and I test a variety of portable door locks while traveling in Xinjiang.Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
14
views
The Carvera- Ultimate Benchtop CNC?
A comprehensive demo of my Makera Carvera 4-axis Desktop CNC with auto-tool changer! Wood, metal, PCB- I show milling and laser engraving and more!
Get a second opinion from Teaching Tech: Carvera desktop CNC mill test - A seriously smart and capable machine
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
25
views
1
comment
Home Networking Part 1- Pulling Cable
The week, I show you how to pull CAT6E ethernet cable to set up a high-speed home network.
Sponsor me, get early access to my videos, exclusive access to my Vlogs and support my work (but only if you can without hardship because I'm going to spend it all on beer and women)😘:
17
views
Discount Dystopia! $50 Face Recognition Security System
I test out a face recognition NVR I bought on Aliexpress- does it really work in the real world?
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
16
views
Hawkeye Firefly 8S- Unboxing and First Impressions
This is a review of the Hawkeye Firefly 8S Action camera- the 90º "no distortion" lens version
I'm pretty frugal, and overall I think it's well worth what I spent. But if you are not sure, wait a while until I have reviewed it more. If you'd like to get one, please use the below URLs- it won't cost you more and it will help me.Support my work (but only if you can without hardship)😘:
12
views
Leveling and Tramming the Vise on my Syil x5 Milling Machine!
I got my giant CNC machine in the door- but still a few things to do before I can start making chips. Watch me run air, get mains power, level the mill, and tram the vice.
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
14
views
YouTube Cheats Its Creators- and I Can Prove It.
YouTube runs a business- and that means picking winners and losers. Humans choose which channels show up in search results, which don’t, who will make it, and who won't. YouTube curates- and I can prove it.
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
12
views
My Livingroom Workshop
Very quick tour of where I build my projects here in Shenzhen. Don't worry, I have a cool new one to post within the next week😊
Support my work (but only if you can without hardship)😘:
10
views
Huaqiangbei Camera Review- Hawkeye Firefly 8s 90º and 170º, DJI Osmo Mobile
Of course I'd rather be Making my own things than reviewing things other people made- your purchase helps fund materials and time so I can do that😊
Support my work (but only if you can without hardship)😘:
8
views
AGM Glory Pro Review- Rugged Outdoor Phone For Camping, Disaster Relief, and SAR.
I check out the AGM Glory Pro, a new 5G smartphone with a host of features for harsh outdoor applications including a thermal camera, night vision mode, extended sub-zero battery life, front-facing flashlight, and public address speaker.
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
18
views
Lockdown Errands with the Diablo Robot!
I help out my neighbors and buy some snacks while reviewing the Diablo robot motion platform!
Note- the Diablo shown in this video is a preproduction unit, confirm before purchasing that the current production unit has the features you are interested in.
16
views
Smallest 3D Printer? The Creality CR-100, is it worth it?
I take a look at one of the smallest FDM printers on the market- the CR-100. It there any reason to buy small over large? Watch to find out!
Sponsor me, get early access and support my work (but only if you can without hardship)😘:
15
views
Install a "BumGun" and Save Toilet Paper!
In this video I show you how to install a handheld bidet sprayer- or BumGun!
Small tips are always appreciated🙏 or if you sponsor me monthly, you get to see my videos a week before anyone else and support my work (but only if you can without hardship because I'm probably going to spend it on beer and women😜):
14
views
Is Naomi Wu just a Mascot?😅 China-Gadgets.de Visits Creality to Find Out!
Many thanks to China-Gadgets.de. A lot of people meet me, ask their tough questions and satisfy their own doubts- but then don't take the time to tell all the other doubters out there that I'm the real deal. I really appreciate it😁
19
views
Shenzhen 360º: "3D Coffice" a 3D printing café
Pause the video and select "1440s HD" under Quality (the little gear icon) or this will look awful and pixilated!
(You can click and drag to look around or use the WASD keys.)Normally in China when there is “3D printing” anything it means there’s a dusty unused Makerbot that no one knows how to use sitting unplugged in the corner. So I came in a bit skeptical and without much hope for this café or any plans to shoot a video. I was pleasantly surprised that they had both a lot of modern equipment and staff actually trained to use it. So I shot this and I hope you enjoy it. I was not in any way compensated I just thought it was an interesting unique Shenzhen thing.
There are subtitles you can turn on and off. I’m not used to speaking English on video (knowing that thousands of native speakers will be listening) and pretty nervous so sorry for the squeaks and ocasional awkward phrasing. I was more than a little self conscious. Like most Chinese ESL speakers my oral English is no where near as good as my written English so transcribing my words for the subtitles was quite embarrassing. Please be kind about it, I will try to relax next time and make my future videos a bit more professional.
Those are my normal clothes. Yes I know, no I don't care. I'll wear what I want.
Support my work (but only if you can without hardship)😘:
16
views