PraveenMohan

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - Monolithic Temple 0:53 - Similarities between Vettuvan Koil and Kailasa Temple 2:30 - Model for Kailasa Temple? 3:16 - 3D Models of Temples 3:53 - History of this Temple 5:51 - Conclusion Hey guys, today let's take a look at this magnificent structure called Vettuvan Koil in India. The specialty of this temple is that it is entirely carved out of one solid rock, just like the Kailasa Temple in Ellora Caves. Most temples are built by adding stone blocks and pillars, but this temple was created by removing or scooping out a part of the hill. Remember the Kailasa Temple is world famous, and the technology employed there is beyond belief, but this temple which is relatively unknown raises a very important question. Is it possible that this temple was built as a model, a prototype of the Kailasa Temple? The similarities between these 2 temples are uncanny. Both were built on hills. Archeologists say both were built at the same time, during 8th century A.D. This temple employs the same rock cutting technology which used a top to bottom cutting approach like the Kailasa Temple. Look at how they removed the rocks on three sides, this is the same technique in Both temples. If you fall from here, you will be dead but the height of this temple is actually 1/4th of the height of Kailasa Temple. This is exactly 25 feet tall and Kailasa Temple is 100 feet tall. This temple is also dedicated to Lord Shiva, just like the Kailasa Temple. The carvings in this temple are nearly identical to the carvings in Kailasa. Both face precisely to the east. The only difference is that Kailasa Temple is much larger and contains, many many complex structures attached to it, while this temple contains just the main tower. Today, before we build anything, we create a simpler small scale model called a prototype. Creating a simple prototype helps us understand the difficulties of building larger structures. Was the Vettuvan Koil Temple built as a small scale model of Kailasa Temple? Is this why it is exactly 4 times shorter and is this why they both have so many similarities? Most experts don't think ancient builders used 3d models before constructing actual temples. But we have solid evidence that they were using 3d models. Look at this ancient carving, here is a figure holding a small 3d prototype of a temple. This shows that planning and modeling existed thousands of years ago. Just like how we create small scale models today, the ancient builders were also building smaller structures before venturing out to create masterpieces like Kailasa Temple. But who really built this Vettuvan Koil? While archeologists claim it was built by Pandyan Kings in 8th century, they offer little or no evidence to support this theory. In fact, this is the only monolithic structure among the Pandyan temples, which makes this claim highly dubious. If they did make such a temple in the 8th century, why did they not create more of such temples in the next few centuries of their rule? Why haven't historians found one stone inscription or palm leaf manuscript supporting this view? If any king made such an amazing temple, he would have definitely recorded it on the walls of this temple, but nothing is found. This plaque on site, put up by authorities, talks about Pandyan Kings, but provides absolutely nothing related to this temple. Locals not only deny the involvement of Pandyan Kingdom, but also reveal something extraordinary. They say that the entire temple was built by just one man, within 48 days. Legend has it that there was a competition between a father and son, and while the father built this temple on the top of the hill, the son built another temple at the bottom of the hill. I will show you the temple at the bottom in a different video, but the amount of rocks removed in this monolithic temple is about 25,000 tons of solid granite. How did one man scoop out such a large amount of rock in just 48 days? What kind of technology was used? And why was such a brilliant structure suddenly abandoned and was left unfinished? Was it built as a small scale tryout before building the Kailasa Temple? Please let me know your thoughts in the comments section. I am Praveen Mohan, thanks a lot for watching. Don't forget to subscribe and also click on the bell button to get all the updates. Please give it a thumbs up and share it with your friends and I will talk to you soon. Bye! #Ancienttechnology #India #Disclosure

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - Baffling Stone Carvings 0:19 - Rolling Balls 0:52 - Recreated Models 1:23 - Expert's Claims 2:09 - Different Materials Used 2:30 - How did they keep it inside? 3:04 - Rock Melting Technology? 3:25 - 3000 Years Old Temple 4:13 - Strange Features in the Temple 4:48 - Conclusion Hey guys, today let us take a look at this ancient Temple called Uthiragosamangai. It has some stone carvings which have baffled all experts. There are these statues of large saber toothed lions called Yalis. But inside the mouth of this Yali, is a perfectly spherical stone ball. You can roll this ball, you can rotate it, but it cannot be pulled out of the mouth. People have recently vandalized it and have tried to pull out the ball using force, damaging the statue, which is why it has been closed for public view. How was this mysterious structure created in ancient times? In fact, the state Government is so baffled by this artifact that they have created modern day carvings like this and placed all over the state. This is a modern day recreation. These were created using high tech machines. Modern Sculptors put flexible sculpting tools inside the mouth and carved the ball. Some experts have theorized that ancient builders followed a similar procedure. After carving the Lion's mouth, ancient sculptors would have worked for countless days, and slowly chiseled this stone ball inside, using primitive tools. But locals in the temple area, point out to something much more interesting. They say that these modern statues have a serious flaw. In newer statues, the ball inside is the same material as the rest of the structure, everything is made of one solid rock. But in this ancient statue, while the lion is made entirely out of one solid block of granite, the ball inside is made of a different material called Onyx. Look at the color difference: the statue looks much lighter, while the ball looks black in color. Now, why are we not able to pull the ball out of the lion's mouth? Because the ball is larger in size, than the openings in the mouth. But how was the ball, which is made of a different rock, put inside in this opening the first place? This ball is not a flexible rubber ball, it is made of solid rock, so it would be impossible to achieve this without rock melting technology. Remember, I have already shown you clear evidence of Rock Melting Technology at a different temple called Ramappa Temple. So, does this statue prove that ancient builders were melting rocks? How else could such a feat be accomplished. Many tourists see this mind-boggling statue, and think that this is also a modern day creation, but archeologists confirm that it is older than 600 years. However, the temple was already mentioned in a 9th century text called Tiruvasagam, making it older than 1200 years. But locals believe that this temple is one of the oldest temples in India, about 3000 years old. According to locals, this temple was entirely built 3000 years ago using advanced technology, and not using primitive tools. As evidence they point out this carving. Here you can see an elephant carved inside a one inch circle. You can see all its features, including the eyes, so what kind of tools were used in ancient times? The temple contains many strange features, it houses a 5 foot tall dancing Shiva made entirely out of emerald. There is also a tree which botanists have confirmed to be 3000 years old. While historians claim that human beings lived a primitive lifestyle 3000 years ago, what we actually see is evidence of Rock Melting Technology, extremely sophisticated carvings and proof of an advanced civilization. Did we once have a highly developed civilization which used advanced technology? How else can we explain these evidences? Please let me know your thoughts in the comments section. I am Praveen Mohan, thanks a lot for watching. Don't forget to subscribe and also click on the bell button to get all the updates. Please give it a thumbs up and share it with your friends and I will talk to you soon. Bye! #Ancienttechnology #India #Search4Truth

Can Fish Drown?

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - A Magical Jar 0:42 - How Do You Pour Water? 1:41 - Anti Gravity Jar 3:00 - Recreation of the Jar 5:03 - Reason for the Holes 5:31 - Clever Planning by Ancient People 6:24 - Karigiri Jars 7:17 - The Inexhaustible Jar 8:13 - Lota Bowl 8:58 - Lota Bowl Mechanism 10:05 - Conclusion Hey guys, today we are going to look at a very strange object, a jar which has magical properties. This anti-gravity jar is at least 300 years old and is displayed at the Museum of Kancheepuram in India. It looks like it has been made of wax, but it is made completely out of clay. It does not have a lid anywhere, so how do we use it? On the top it has holes, but you cannot pour water through these top holes. The only way to pour water is to hold the jar upside down, and you can see 5 holes at the bottom, and you can pour water through these holes. Now, you can see the water disappearing, but if you put the jar in an upright position, the water does not drain through the bottom holes. This is why it is called the Anti-Gravity jar. Now, notice that if the jar is kept upside down, the water is also not draining through the top holes. How did the water magically disappear? Where did the water go? The only way to get the water back is by using the spout, all the water we added through the bottom can be retrieved only through the spout. This jar is about 300 years old, but similar jars were used even 2000 years ago in India. What kind of technology was used many centuries ago, to create this magical effect? Remember, this jar is made of clay, so there is no way to put a rubber stopper or a cork inside, because when you bake this clay jar in a furnace or kiln, the rubber or cork would have turned into ashes. Also, if you shake it, there is nothing moving inside, it has no moving parts at all. This jar proves that real magic and supernatural abilities existed in ancient times, this is why the jar defies the law of Gravity. Things like this exist - I have even shown you a supernatural road that defies gravity in the U S. If you drop a ball in this anti-gravity road, the ball will roll up hill, against the law of gravity. Now, let's see how this magic jar was really made. I have built the same model here, but I have made it on a transparent container, so you can see how it works. On the bottom of this jar, I have placed a funnel in an inverted position, and I have attached a 90 degree bend at the end of the nozzle here. So, when I invert the Jar, and pour water through these holes, the water goes through the funnel, but does not stay there and gets released into the jar. But when I put the jar back in the upright position, the water cannot get back into the funnel. The water stays around the funnel and comes back out only through the spout. This is exactly how the 300 year old Magic Jar works. Or is it? . So you can see how complicated this design actually is. And why were these holes made at the top of the magic jar? Just to confuse us? No, remember this jar has no lid, without these holes, there would be no air circulation inside the jar. If someone left it with water inside, the water will have no room for evaporation without these holes, so the top holes are absolutely necessary. It shows how clever people were many centuries ago. Now, everything I have used is plastic and I am able to glue the pieces together, and I can also open the container and make changes. But the original Jar is one piece and is completely made of clay. When you bake a clay model like this in a furnace or a Kiln, the clay will expand and will get deformed. Any slight change or just one crack inside will completely ruin the magic effect of the jar. And you can see how the jar has a shiny green glazed appearance. This color and shine has remained intact even after repeatedly using it for 300 years. Who made these amazing jars and why? These jars were made in a small village called Karigiri, this is why these jars are known as Karigiri Jars. Potters in this village, designed many ingenious clay objects which baffled general public. Many centuries ago, Karigiri was the center of these "magic" items. It is said that they built about a 100 different magic containers and each one gave a different effect. Today, these clay jars are no longer made in that village and are displayed in Museums. Out of 100 different types of magic containers, only half a dozen exist today. #Search4Truth #India #AncientAliens

I had to Separate Sushi from her Sons

Why I Kept my Name a Secret for 8 Years

Is Sushi still Pregnant? 🤰

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - Carving of a Bicycle 1:42 - How Bikes Work? 2:00 - Discovery of Wheels 2:19 - Ancient Evidences of Advanced Technology 2:38 - Baseless Theories 4:04 - Ideas of Mainstream Archeologists 4:36 - 1200 Year OLD Temple 5:25 - NOT a New Addition 7:19 - Archeologist's View 7:51 - Conclusion Hey guys, I am at this ancient temple in India called the Panchavarnaswamy Temple temple and here you can see something quite extraordinary. In a dark corner, on one of the walls, we can see this amazing carving of a man riding a bicycle. Historians tell us that the bicycle was invented in 1800s, just 200 years ago, but how was this carved in this ancient temple which is about 2000 years old? Before we go into this, first let us confirm if this is really a bike. Here you can see a man holding 2 ends of the handle bar, and is in a sitting position on the saddle. One of his feet is clearly on the pedal, if you look closely, you can even see the pedal underneath. There are two wheels, this is clearly a bicycle, there is absolutely no doubt about this. And we have read in history books, that bikes were invented in the last 200 years in Europe. But this carving does not show a European, it shows an Indian man with a large mustache, and a shawl on the top. His waist-cloth confirms that this is an Indian. Is it possible that bikes were used in India thousands of years ago? Are we looking at evidence of suppressed history? To understand this, we need to learn how bikes work. To ride a bike, we need three important things, wheels, Mechanical power transmission like chain drives and the ability to balance your body. All experts agree that wheels were invented in copper age, which is about 6,500 years ago. Archeologists recently discovered a chariot with wheels in India which is at least 3800 years old. We have clear evidence that complex power transmissions systems were used in ancient times. Not only do we see gears, we have solid evidence of lathe machining which would be impossible without mechanical transmission systems. We invented wheels 6500 years ago, But why did it take human beings more than 6000 years, to invent the bicycle? Some experts give a strange reason for this. Since early human beings evolved from apes, they were not only unable to put complex ideas together, they were also not able to balance their bodies like modern human beings. Today, we have learnt to use our bodies to do impossible acrobatic tricks, this is an evolving art but ancient people were physically clumsy people. But this theory is nonsense, because the carvings in ancient temples clearly prove that early human beings were able to do these great acrobatic tricks. They had better, flexible bodies than us, these carvings are incredible but that's another video. So, we can see evidence of wheels, transmission systems and body balancing in ancient Indian temples. Did it really take many thousand years to put all these three things together to create a bike, or were bicycles really used in ancient times? But what do mainstream archeologists and historians say about this carving? They have very simple explanations. Some have argued that this temple was entirely built just 100 years ago. Since this is not an ancient temple, all these carvings are new, and sculptors carved what they saw. There were bikes 100 years ago, so it was easy for sculptors to carve this. Are experts right? Is it possible that this is a new temple built in the last century? No, because this temple is mentioned in the 7th century text called Tevaram. This text, written in ancient Tamil language clearly mentions this temple by its name. Therefore, this temple existed 1200 years ago. There are not only inscriptions on the temple walls to prove that this is an ancient temple, this site was even recorded by the Greek geographer Ptolemy who lived about 1900 years ago, so this temple must be at least 2000 years old. #Search4Truth #India #Ancienttechnology

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - Lady of Elche 0:35 - Gear/Ear-ring? 1:07 - Ear-ring/Headset? 1:57 - Carvings with Complex Gadgets 3:11 - A Communication Device? 4:41 - Conclusion Hey guys, today let's a look at a few of the ancient statues and carvings in India along with this bust found in Spain known as the "Lady of Elche". The common factor between all these figures is that they are all portrayed with very advanced technological devices which resemble modern day communication gadgets. Who are these figures? And more importantly, what are these devices? In a previous video I showed you these strange statues called Madhanikas, and one of them sports a very strange device in her ears. This looks like a complex gear like instrument. Is it merely a fancy looking ear-ring, or was it a rotary device like a radio tuner? It has several circles inside and has gear like teeth, which could probably rotate. Now, let's take a look at the lady of Elche, found in Spain. Estimated to be 2400 years old, She is a very mysterious figure and has 2 large circular devices on her ears. There are radial lines coming out of the center of these devices and this completely covers her ears. It is impossible not to think of modern day headsets. What do archeologists and experts say about these devices? It is simple, this is just a fancy earring, and this is just a fancy headdress. They have dismissed all claims that these could be some kind of devices. But how do experts react to this carving in the ancient Kailasa Temple at Ellora caves? This figure is shown with many complex gadgets attached to him, but look at one of his ears. He is holding a dumbbell like device as though he is listening to something. This is clearly not an ornament, so what is it? Experts simply don't have an answer to this. But this is not an isolated case, there are many ancient carvings like this in India, look at this figure: His communication device is disfigured a little bit, but look at this, the exact same gesture. There is no doubt - He is clearly listening to something using a device. Not one expert has come forward to explain these carvings. If the lady of Elche and the Madhanika are wearing mere ornaments and headdresses, what is this dumbbell like structure? And why is it remarkably similar to the dumbbell shaped device on the lady of elche's ears? Some people have claimed that these large rings are nothing but hair bundles called rodetes, but a man by the name of Francisco Vives found traces of different colors on this, and this is what the painted bust would look like. A modern recreation shows that this was some sort of a device, not a headdress. Is it possible that the lady of Elche is shown using an advanced wireless communication device? Perhaps this explains why Heinrich Himmler, the closest advisor of Hitler, visited the Lady of Elche. According to Himmler, these ancient statues contain clues to advanced ancient technology, which could be recreated by modern human beings. We all read that wireless communication was invented in 1895, just about 125 years ago. However, all these ancient figures are shown using a similar technology. Think for a minute - Why are all these figures portrayed with these gadgets specifically around their ears? This cannot be a coincidence, these are some kind of advanced radio communication devices. Are we really inventing new technology or, are we merely reinventing ancient technology? All our modern day high tech machines are in fact already depicted in ancient artifacts. We have carvings of Vimanas which were flying machines, we have already found clear evidence of lathe technology. Are all these evidences mere coincidences or are we looking at traces of a lost civilization which used advanced devices for communication and technology? Please let me know your thoughts in the comments section. I am Praveen Mohan, thanks a lot for watching. Don't forget to subscribe and also click on the bell button to get all the updates. Please give this video a thumbs up and share it with your friends and I will talk to you soon. Bye! #India #Ancienttechnology #Ancientcivilizations

Why I Never Flush my Dead Fish

Have I ever Saved a Fish from Dying?

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - Out of Place Artifacts 1:30 - Mesmerizing Madhanikas 2:02 - Highlights & Shadows on Rocks 4:51 - Rock Melting/Machining? 6:27 - Uncanny Details 8:49 - 2 Peculiar Circles 9:41 - Connection with Zodiac Signs? 10:09 - Conclusion Hey guys, this is the ancient Ramappa temple and you are looking at a very fascinating structure full of brilliant carvings, but your eyes are naturally attracted to these shiny black idols, which look completely out of place. Almost all visitors are totally spellbound by these idols - this is the center of attraction in this temple even though most of them have been destroyed by invaders. When you look at these idols, why do you think that these idols don't belong here, they somehow feel like out of place artifacts? Because your mind's intuition tells you that these idols could not have been made without machines, and you have been taught through a lot of books that ancient builders did not use machines. This conflict is why you feel that these are out of place artifacts. This is not only happening in your mind, but all visitors get confused and mesmerized by these idols at the same time. Almost all visitors think these are modern day wax models molded and recently placed, but archeologists confirm that these are at least 800 years old. The temple has thousands of great carvings, but they can be made with simple tools, but these statues, known as Madhanikas, cannot be made with chisels and hammers. Such perfect statues can be made only with advanced technology. These idols seem to have no human errors, they are so well polished, they actually create a phenomenon called "highlights and shadows" due to their reflection. What do I mean by this? When a material is polished with hands, it doesn't achieve a great level of reflective surface, but when an object is created with machines, it becomes so reflective that it automatically creates lighter areas called highlights and darker areas called shadows. In reality this container I am holding doesn't have any dark or bright areas, but it reflects the light in the surrounding to create these illusions. This is similar to highlights and shadows in photography, but that effect is created by light. This effect is only achievable on stones with polishing created by machines. For example, you can see this woman called Nagini or Snake woman. On her body, you can notice several shades of lightness and darkness. The entire structure is made of one stone, but this is so well polished, that it automatically creates dark areas and light areas. And in photography, we create this effect by using sunlight or by reflecting sunlight using reflectors, but these statues are so well polished, they don't even need sunlight. Look, the sun is above the roof, it is not shining on these idols and you can still see plenty of shades, because they are reflecting the light from the surrounding. The tour guides tell me that the shadow of the necklace falling on her body is also an illusion. If there is no sunlight, how could there be a shadow? People are baffled by this and locals believe there was some sort of heat treatment done in this area to make it look like a shadow. However, I think this is a shadow cast because of the extremely well polished surface, and it takes the light from the surroundings. #Ancienttechnology #India #Search4Truth

How is Sushi doing?

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - First Artificial Caves 0:53 - Oldest Energy Sites 1:13 - Today's Condition 1:45 - Archeologist's Views 2:26 - Finished Structures 3:05 - Place for Meditation 4:30 - Visual Representation of Mantras 4:59 - Conclusion Hey guys, today we are going to see some of the oldest cave temples in South India, these are called Mamandur caves, and they are in the middle of nowhere. Archeologists estimate they were built around 600 A.D, which means they are at least 1,400 years old. These are the very first artificial caves built by ancient builders in this region and the beauty of these structures is that nothing was added in the construction process. Normally, construction means adding materials to build a structure, but here, the construction was a process of removing materials to create these structures. Archeologists refer to them as temples, as a place of worship, but these were in fact built as a place for meditation. Spiritual leaders have mentioned that these are the oldest "energy sites" in all of South India. There are a total of 4 caves, and they are in terrible condition. What you see on the ground is piles of bat droppings, the poop accumulated here is so bad that breathing this in will make you sick as a dog and can cause diseases like histoplasmosis, which can kill you. So, if you ever plan on visiting this place, don't be like me and take necessary precautions. According to archeologists these are incomplete caves, but there are a total of 4 caves and all of them are said to be unfinished. I mean think about this, people could have started building one cave temple and could have left it unfinished. But instead, archeologists say they people began working on the first cave and left it unfinished, and then moved on to the next cave, which is right next to it. And while the second cave was half done, they again gave up the project and moved to the 3rd cave and so on. This is a ridiculous theory put forth by archeologists. The reality is this, what you are looking at are finished structures. Out of the 4 caves, the first one was built as a temple. This was an ancient Shiva temple with a lingam in the center. You can see paintings on the walls, which means that this is a finished structure. Painting process only begins after completion of a structure, not in unfinished stages and is usually the last stage. If you look at other caves, they also have paintings which indicate they were also complete. The main reason archeologists claim these are unfinished caves is because there are no idols inside these chambers. But these were created as a place for meditation, ancient texts describe monks meditating in small, isolated chambers, and these are the oldest examples in the region. If you look at the doorway of these chambers, you can see slots both at the bottom and at the top. These are for doors, to lock yourself in, in complete isolation for long hours of meditation. This is why this ancient site was referred to as the spiritual center of South India. In addition to isolated meditation, group meditation and chanting was also taught in these caves. This is why some of them have no private chambers and look like a pillared hall. And the series of slots on the floor reveal that a roofed structure existed once upon a time, there would have been stone slabs or wooden poles placed inside them to support a roof. A small group of people would sit together and chant a specific Mantra. What kind of Mantra did they chant? The visual representation of that Mantra is this cymatic pattern. The same pattern is repeated on many of the pillars. Decoding this pattern will reveal what Mantra was chanted inside the caves. So, you can see what was once a spiritual center of India is now a place for drinking, illegal activities and a massive home for bats. Please share this video to spread awareness and I hope someday the Government can clean up this mess. I am Praveen Mohan, thanks a lot for watching, don't forget to subscribe and I will talk to you soon. Bye. #Ancientcivilizations #India #Search4Truth

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - A Unique Stone Monument 0:27 - Sacred Hills of Tirumala 1:01 - Mysterious Figure 1:24 - Giant Structures around the World 1:52 - Rituals Performed 2:50 - Mud Fossils? 3:26 - Pareidolia? 4:25 - Conclusion Hey guys, there is a very unique stone monument in the hills of Tirumala in India. This is a very large structure that looks like the face of a Hindu God. Locals say that this is not a natural formation, some say this is a man made structure and others claim that this is a mud fossil of a giant. The hills of Tirumala are considered sacred to Hindus - the temple here is the richest temple in India which pulls millions of devotees and there are 7 hills which contain many mysteries - Each hill is said to have a secret cave which contains mummified bodies of ancient people. There is even a stargate like structure which people are not allowed to access. But the most mysterious structure is this giant figure: you can clearly see the mouth, nose and eyes, and even see the long helmet which is typical of Indian Gods. Around the world, there are stone structures on mountains which are known to be the faces of Gods. This is the famous "Lady of Mali" in Africa and geologist Angelo Pitoni revealed that this is not a natural formation. And this face is found in Machu Picchu, considered sacred by the Incas, I have already shown you this structure in a different video. But there is a key difference between these figures and this structure in India. Locals in India still worship this structure and perform rituals on it every year. What you see here not only looks like a giant garland, but it is in fact a giant garland that was made specifically for this structure. Here you can see how devotees have created a giant flower garland to replace the existing garland. The garland is so large, that many people have to carry this to the top of the hill. Devotees take a lot of risk, they tie a rope and get down on slippery rocks to place the garland and clean this structure every year. They also give offerings in the form of milk and other liquids and these rituals can be seen from miles away even if you are not on the hill. This stone structure known as Venkatadhri is thought of as a man-made structure by some people. But others say that Lord Vishnu is physically present inside this. According to them, this is a petrified form of an avatar of Lord Vishnu. They insist that a giant form of Vishnu has turned into a stone and is standing here. In modern terms, we refer to this as Mud fossils or Petrified fossils. But what do experts say? Geologists have dismissed this as a natural formation, and say that you see a face because of pareidolia. What is pareidolia? Human beings have a remarkable tendency to identify faces anywhere they look. And they attribute this tendency to evolution. According to scientists, early human beings needed to identify anything that resembled a face, to avoid getting killed by a predator. So, we have a tendency to identify objects which resemble human or animal faces. Even though Pareidolia is a known phenomenon, no geologist has actually examined this structure - Because it shows a series of cuts on the rock which do not look natural. Is it possible that the ancient builders were creating a large megalithic face of Vishnu to be viewed by people in the entire area? Or is this figure a petrified Giant or a Mud fossil? Please let me know your thoughts in the comments section. I am Praveen Mohan, thanks a lot for watching, don't forget to subscribe and also click on the bell button to get all the updates. Please give this video a thumbs up and share it with your friends and I will talk to you soon. Bye!

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - A Strange Temple 1:01 - CANNOT Dismantle 1:23 - Primitive Modern Technology 2:01 - 1000 Pillar Temple 2:27 - Invisible Joints 3:09 - Complex Interlocking System 4:25 - Advanced Tool bits 5:28 - Ancient Drilling Machines 6:02 - Conclusion Hey guys, today we are going to look at one of the strangest ancient sites in India - this is the Thousand Pillar Temple which is at least 750 years old. On first sight, it looks like a regular temple, but there is something fundamentally different about this temple, because there are no visible joints at all between the stone blocks in the walls of this temple. This is a large temple, but look carefully as I go from the ground to the top, do you see any joints? This makes people wonder if this entire temple is made of one solid rock, like the Kailasa Temple, but archeologists confirm that it is in fact made of many many blocks of stone. In 1300 A.D , an army of the Muslim King Allauddin Khalji tried to demolish this temple, and they took out many of the stone blocks from the ground and the ceiling, because it was easier to dismantle them, but they could not dismantle the blocks on the walls. If you look at the floor, these are newer stone slabs placed by the Archeology department, and you can see how these blocks are loosely connected. If you compare the modern day stone masonry with the ancient technique, modern technology appears quite primitive, because you can clearly see the joints. The archeology department has been trying to restore the temple from the destruction and graffiti by Allauddin Khalji's army. Now, why is this temple called 'The thousand pillar temple'? Most visitors wonder why this is known as the thousand pillar temple because it doesn't have a thousand pillars. It is called so because it is made of one thousand blocks of stone, this is the actual reason why this name is used. But even in most sophisticated temples like the Lepakshi temple, we can see clear evidence of joints between the blocks, but in this temple, the joints are not visible. What is fascinating is that there was no cement, mortar, or glue used to join these blocks. How did ancient builders achieve such an extraordinary level of jointing, many centuries ago? What kind of technology existed and how was such a temple built? The underlying technology is this: Ancient builders created a complex interlocking system with at least a dozen different cuts in each stone block. These complex cuts maximize the amount of surface area shared by the connecting blocks, and will create an extremely tight fit. This is hard enough to do between 2 stone blocks, but imagine using several stone blocks on all sides and how many cuts would have been needed to connect 4 or 5 blocks together. I mean, this is just an extraordinary technology. This can be done on wood, but how did they manage to make these cuts on large stone blocks many centuries ago? Making these cuts is one thing, but the level of precision, to make these joints invisible can be achieved only with advanced machines. We can clearly see that building a massive temple with no visible joints is impossible with primitive tools. Did ancient builders use cutting, drilling and polishing tools, just like today? If so, do we have any evidence of these tools in the temple itself? How about these carvings which resemble modern drilling and polishing tools? In most temples, we usually see carvings of Gods, but in this temple, we can see these tool like carvings, with a conical, striated top with a long shaft, which is remarkably similar to modern day tool bits. Just compare these carvings with today's tool bits side by side. You have to admit there is an uncanny similarity. Is this a coincidence, or did ancient builders use tool bits just like us, to make these precise interlocking system? The pillars in the temple confirm that drilling machines were in fact used. There are very tiny holes drilled on these pillars. My friend is struggling to send a thread through the small holes, but these holes are too small even for a thread. The priest is happy to help us, he picks up something thinner than a thread and inserts it successfully through these holes. If you think these carvings are not drill bits, how do you explain such tiny holes carved on the pillars? #Ancienttechnology #India #Hinduism

Will this baby Fish Survive?

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - Warangal Gates 0:26 - Keyholes & Laser Cut Slots 2:11 - Complex Slot Positions 3:11 - Hard to Understand 3:40 - Changing the View Point 4:54 - Passing Laser Beam 5:43 - 4 Quadrants 6:15 - Jantar Mantar 6:45 - Advanced Instruments? 7:23 - Magnetic Birds 8:13 - Sacred Geometry 9:04 - Sacred Ratio 9:32 - Conclusion Hey guys, today let us take a look at the so-called "Warangal Gates" aka "Kakatiya KalaThoranam". In my last video, we saw that these ancient structures are not entrances or gates, so let's try to understand why these were built. Most experts haven't really examined these structures, but we are going to look at them carefully. On the very top of this gate, there is a straight slot, almost a laser cut slot right in the middle, and you can see the Sun shining through it. Initially, I thought this was a sculptor's mistake, but this slot has been created intentionally on all 4 gates and we do see them on East, West, North and South gates. But these are not identical. On top of these gates, you can see these Key hole like openings. The position of these slots are made on different keyholes on different gates. Let's start from the East Side gate, and here you can see that this slot is made on the 4th hole from the left. The position of the slot is at three and a half Keyholes or 3.5. Now, if you go to the exact opposite structure on the other end, the west side gate has a slot on the 3rd hole from the left, not the 4th hole as in the East gate. So, the position of the slot at the west gate is 2.5.Now, remember I am observing everything from the center of this site, and if you see the east and west gates side by sides, this is how they look, they are not identical. The position of the slots are different. Of course, experts will argue that these are simple mistakes made by primitive sculptors and have no meaning at all. But I will show you why experts are wrong. Now, let's go to the gate on the North Side, and again the straight slot is at the 4th keyhole or at 3.5. If you look at the opposite gate at the South side, the slot appears on the 3rd keyhole or 2.5. So you can see the pattern like this: The East and West are 3.5 and 2.5 and the North and South are again 3.5 and 2.5. What is the meaning of this complex pattern? This proves that there is something fundamentally wrong about our history books, we have not evolved from a primitive civilization into a much more advanced civilization over many centuries. Instead, the more we look at ancient sites, the more we realize that our generation does not have the capability to understand what they were doing. But we are looking at these gates from the human point of view and we are observing these gates from the center of this site. If you pretend that you are a giant and these gates were small lego blocks, you would stand outside the site, and look at them from one direction. If you go outside this site and look at the East gate, you suddenly realize that the slot is at the 2.5 and not 3.5. Now, if we look at both east and west gates from the outside standing at any one point, these slots are actually identical. Again, if you go outside on the north side for example, and look at both North and South gates, the position of the slots will be the same. The entire confusion of these slots at the third or 4th keyhole occurs because we are looking at it from the human point of view, standing in the centre of this massive site. These gates are all designed to be exactly 33 feet tall, and are positioned at the exact cardinal directions. Now, if I go outside the eastern gate and shine a laser beam parallel to the ground, through this slot, the beam would pass exactly through the slot on the western gate. Of course, there would be a particular day in the year, when the sun rises and a beam of light would pass through this slot on the east and exit through the slot on the western gate. We would have to have astronomers calculate this particular day and its importance. #India #Ancienttechnology #Disclosure

How many Fish do I Have?

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi Hey guys, let us take a look at these extraordinary stone arches in Warangal Fort. There are 4 gigantic stone entrances which stand along the 4 directions, and they are each 33 feet tall. These arches are the most mysterious ancient structures in India, and hold many, many secrets. All archeologists and historians claim that these 4 structures are entrances, but this does not make any sense at all. If these are entrances, why do we not see any walls attached to them? Why are all these arches standing separately without anything nearby? Some of these arches are placed on top of stone structures which are nearly 5 feet tall. Clearly, it would be impossible for people to climb on to these high bases, and then use them as entrances. But there is one thing that has baffled both experts and visitors: Why did they make these arches incredibly tall? What is the need to have 33 feet tall structures? Just compare my size with the arch and you can see how big these structures really are. Some experts have claimed that ancient people used elephants and therefore tall entrances would be necessary. An Asian elephant is only 9 feet tall, so why did they make the entrances 3 and half times taller? Who built these incredible structures anyway? This is the biggest mystery of Warangal Fort, nobody knows who created these structures. This site is full of incredible stone structures and I have already shown you the perfect machined lingam in a different video. Both historians and archeologists have clearly stated that there is no evidence of who actually built these structures. They agree that the Warangal fort was merely renovated about 800 years ago, which clearly means that these structures already existed before that time. However, experts have no answers as to who originally built these structures. Residents of this town tell a very different story about the builders. According to them, these structures were built thousands of years ago by Giants who stood much taller than us. They point out to something very interesting: it would be impossible for human beings to create these massive arches. Each of this arch weighs more than 125 tons and is made of several huge blocks of stone. For example, this block in the center would weigh at least 15 tons. How was it lifted to a height of 30 feet and placed on top? Experts don't have an answer to this question, but perhaps the real answer is in the arch itself, there are carvings which show giants lifting up these blocks and placing them on top. Is this a coincidence or is this how these arches were built? Not surprisingly, this representation is almost identical to another monstrous megalithic site, the stone henge in England. This painting is the oldest depiction of Stonehenge and it clearly shows a giant lifting and placing huge stone blocks. Are these paintings and carvings just coincidences? Or did a race of Giants once exist around the world, who built these extraordinary structures? Forget about human beings building these gigantic structures, history shows that human beings could not even destroy these arches. In 1310, a military commander of king Alauddin Khalji attempted to destroy these arches. While he was able to destroy the rest of the structures, the four arches have remained intact. You can see the evidence of his failed attempts here, he gave up realizing that these arches were simply too big to destroy using human hands. If these structures are too big to be destroyed by human beings, is it also possible that they are too big to be built by human beings? Now, whether these arches were built by Giants or by human beings, one thing is clear: These are not just simple entrances. They were also used for some other advanced scientific purposes - but to understand that, we would need to look at the sun. I will talk about this in my next video, please share this video with your friends. I am Praveen Mohan, thanks a lot for watching, don't forget to subscribe and also click on the bell button to get all the updates. Please give this video a thumbs up and I will talk to you soon. Bye!

Why I put my Fish in Bowls 🥣

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - Ancient Underground Temple 0:20 - Secret Rituals 1:41 - Kapalikas 2:41 - Ceiling with Spiral Design 3:12 - Temple for Lord Shiva 4:02 - Conclusion Hey guys, this is an ancient underground temple near Warangal Fort, it doesn't have a name and is completely abandoned. This is an isolated place and gets no visitors and is estimated to be at least 800 years old. I am gonna take you inside the temple and we can see some very strange details and secret rituals happening inside the temple. The temple is located at the underground level, and there is only one side that this completely open, and on all the other sides, it is totally covered with dirt. It has a very low ceiling, and it gets lower and lower as we go into the main chambers. What's really fascinating is that, this place shows evidence of strange rituals. On the floor, you can see a lot of chicken feathers, alcohol bottles, and pieces of lemon stuck on a thin rod. Of course we can assume that some guys were just drinking and cooking here, but you can also see religious items like saffron powder strewn all over the floor, and also matchsticks and candles. This means there was some kind of a black magic ritual performed here. Locals say that a group called 'Kapalikas' gather here during new moon nights and indulge in strange rituals including meat eating and drinking. The term Kapalika means "Skull-Men", these people carry human skulls and are sometimes even known to worship skulls. Remember, I showed you the temple of crystal skull a few weeks back? This temple is very similar in appearance to that one, and I think there could be a connection between the two. What's intriguing about this temple is that even though it is abandoned, it doesn't have any bats, but is home to a lot of insects, here is a lizard and as we go into the main chamber, we begin to see a lot of spider webs. There are huge spiders all over the walls. The entrances are very short, less than 5 feet. This chamber has no deities, no idols and is completely empty. The only fascinating part is the ceiling which has a nice spiral design. But this temple has 2 main chambers and I am gonna go inside the next chamber and try to identify what the main deity would have been. You can see that the floor of this chamber is completely destroyed, but this broken uprooted stone structure is actually a lingam. So, this was definitely a temple dedicated to Lord Shiva. I wonder why these stone structures were completely demolished and why this temple was abandoned. You can see rich paintings on the walls and the ceiling, and this must have been a very beautiful place with lots of visitors, many centuries ago. And I have already shown you these pillars, made of multiple blocks and how they were joined in my previous video. I hope someday, the government can restore this temple to its original shape. Please share this video with your friends to spread awareness about abandoned ancient temples. I am Praveen Mohan, thanks a lot for watching. Don't forget to subscribe and also click on the bell button to get all the updates. Please give this video a thumbs up and I will talk to you soon. Bye.

How I Accidentally Killed my Duckweed 🪦

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - Ceiling Design 1:04 - Strange X Marks 2:16 - Flexible Drilling Tools 2:42 - Baffling Statues 3:37 - Powerful Earthquake 4:05 - Miniature Model 4:38 - Empty slots in the Model 5:37 - Earthquake Proof Construction 7:22 - Extraordinary Drilling Technology 8:14 - Ancient Drill bits 9:40 - The Temple & The Prototype 10:44 - Gods with Drill bits 11:34 - Mysterious Bending Pillars 12:27 - Taper Joints 14:56 - An Underground Temple 15:57 - Conclusion Hey guys, let's take a look at Ramappa Temple which was built at least 800 years ago, and by the end of this video, I think you would agree with me that ancient builders must have used a very advanced technology, similar to modern day technology. Let's take a look at the ceiling in the center of this temple. In one square, we can see hundreds of Gods and if you zoom in and shine a flashlight, we can identify each and every one of them. Every corner tells a story. We are not going to examine the complex spiral designs which look like 3d cymatic patterns, we are not going to look at the protruding buds, and the centerpiece which is hanging out in the middle. We are only going to zoom in on the smaller figures which are less than 1 inch long. This temple was invaded by a commander called Malik Kafur, and he destroyed some of these figures. But what's fascinating is that after he destroyed the figures, you can clearly see the X mark behind them. This means there is a gap between each small idol, and the surface at the back. The idols are very small, less than 1 inch long, so the gaps between the idol and the background must have been in millimeters. So, how did anyone create these X marks behind them within these small gaps? Forget about ancient machining technology. We cannot even carve these X marks today, because there is no room to put your hands inside and carve them? How can we make the X pattern on solid rock, with 2 millimeters space to carve, even with modern machinery? We would need flexible drilling and polishing tools similar to instruments used for advanced surgical operations like laparoscopy. Even if they were molded using rock melting technology, the ancient builders would still need very advanced precision tools to create the mold or the frame itself. But there is more baffling evidence of ancient machining technology. This temple has a series of statues placed all around it, and at first look, you think they are modern day wax models molded to perfection. Archeologists confirm that these were made by ancient builders, but there are no tool marks, and no human errors made on these structures. Were they created using high tech engraving and polishing tools, similar to what we use today? Now, what really baffles me about these statues is not how perfect they are, but how they are still standing in place, even after a powerful earthquake shook this temple. The earthquake dislodged many of the blocks in the temple, and I have already shown you how the ancient builders made this structure earthquake proof. But how did these statues, not fall down? These are individual statues made of black basalt and are standing at an angle. How are they attached to these sandstone blocks behind them? Normally, it would be impossible to find out, but ancient builders were extremely clever, they knew that someday, someone would come looking for answers. #Ancienttechnology #India #Disclosure

Instagram :- https://instagram.com/praveenET Twitter :- https://twitter.com/IamPraveenMohan Email id :- phenomenaltravelvideos@gmail.com This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi 0:00 - Musical Cylinder 2:29 - Rock Melting Technology 2:48 - A Strange Demonstration 3:54 - Basalt Rock 4:13 - A Defective Piece 6:05 - Floating Rocks 6:28 - Conclusion Hey guys, today we are going to examine the Ramappa temple which shows some solid evidence of Rock Melting Technology. Here you can see Lord Krishna playing his flute, and his feet is touching a leaf of this tree. And this beautiful woman is leaning on the stem of the tree. What could be the meaning of this? If Krishna was really playing his flute, the music he made would travel through the tree. If I tap on the stem, it makes a strange metallic sound. This is made of one solid rock, but yet it makes different sounds when tapped in different parts of the tree's stem. Note the difference in sound. And if you tap on other areas of the same rock, there is no sound. Of course, this is not a coincidence, the ancient builders clearly wanted us to know that this cylinder makes musical sounds, this is why they carved the symbol of Krishna playing his eternal musical. But is this structure a carving? All historians and archeologists claim that everything in this temple was manually carved by hard labor. But how do you carve a cylinder on rock that makes music? And even more interesting, how do you carve a cylinder which will make different notes when tapped in different areas? And notice the width of the stem, it has the same width from top to bottom. The different sounds are not created because of the variation of size or shape. Sculptors and Stone Masons confirm that there is no technology today, to carve a single rock which can make different sounds, when tapped on different areas. But how was such technology used at least 800 years ago, in this temple? The only way to create such different sounds is by altering the density of the rock, by melting the rock and molding it into a desired shape. But is it even possible to melt rocks and make it into different shapes? In 2016, University of Buffalo demonstrated something strange. They put rocks in a furnace, heated it to over 2500 degree Fahrenheit, and made it into a liquid. In fact, nature does it all the time, it throws out liquid lava whenever there is a volcanic eruption. When scientists at University of buffalo poured this molten rock out, they gathered it into a simple cast made of sand. You can see the molten rock quickly fills up and takes the shape of the cast. This is exactly how we make metallic objects like swords and weapons for example. Did ancient builders use the same technology of melting rocks and mold it into desired densities, this would be the only way to make it create different sounds in different places. What's really interesting is that University of Buffalo chose the same type of rock as the ancient builders, they are both basalts. Basalt Rock has properties that are ideal for melting and casting into different shapes. But this temple has another interesting evidence of Rock Melting technology. The pillars in this temple are quite extraordinary with very complex designs but there is one piece that stands out. Not because it is carved, but because it has been left blank, while all the other pieces on the same level are carved. And it shows something very strange, it shows a defect in molding technology. Let's take a closer look at this surface, it has extraordinary polishing, but this surface is not perfectly flat. To understand this, you have to examine it by looking at it from a lower angle. The surface has a curvature, with a concave defect on it. This is why it looks bent out of shape, like a piece of plastic. It is impossible to make such a smooth, concave cut on rocks with manual tools or even electric saw, and it cannot be accomplished by hand polishing. This is a common defect caused in molding process, this is called Warping. When we mold objects, the liquid sometimes will cool at different rates in different places. This will cause the object to become bent out of shape. And this is exactly what happened here, this was a defect made while melting and cooling the rock. The ancient builders recognized this was a defective piece, this is why they did not carve anything on it. Now, remember, I showed you the floating rocks which were used on the tower of this temple. These bricks were created by heating mud to a very high temperature, and adding other ingredients to make them light weight. You can click on the top right corner to see the floating rocks. From all these evidences, we can clearly see that ancient builders were using rock melting technology. #Search4truth #India #Ancienttechnology