PhillyswordsRC

FEATURES The ultimate 1/8 scale ARRMA buggy out of the box, with many laser-etched TLR Tuned parts. Ready for racing or bashing with factory-installed Spektrum electronics. Standout ARRMA body with an exclusive paint scheme of Race Spec colors. Powerful 4S and 6S LiPo capable Spektrum brushless power system. Spektrum SLT3 3-channel 2.4GHz radio and SR315 dual protocol receiver. Spektrum S652 steel gear waterproof digital servo with 265 oz-in of torque @ 7.4V. TLR Tuned 7075-T6 aluminum parts — chassis, shock towers, and steering rack. TLR Tuned adjustable suspension hangers. TLR Tuned black TLR branded shocks with machined tapered shock pistons, machined shock guides and X-ring Seals, attached to the shock towers with EXB shock standoffs. Black-anodized aluminum motor mount, servo mount, and 17mm wheel hexes. Race Spec tunable rear wing mounted on a high rear wing mount. Race compound dBoots EXABYTE tires.

RC Discount Superstore 811 Huntingdon Pike Rockledge PA 19046 www.RCDISCOUNTSTORE.COM Kyosho Fazer Mk2 touring car FZ02 chassis with 1969 Camaro Z/28 RS Body The Kyosho Fazer Mk2 FZ02 VE 1969 Camaro Z/28 RS Supercharged ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car. Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 461mm

RC Discount Superstore 811 Huntingdon Pike Rockledge PA 19046 www.RCDISCOUNTSTORE.COM Features: 4S 16% Larger footprint – longer and wider than the previous KRATON 4X4 4S platform for added stability Tough updated suspension arms to increase vehicle width Durable steel 1.35 module main diff gears and input gears in the front and rear gearboxes Strong CVD telescopic driveshafts front and rear Higher shock towers, longer shocks and wider suspension arms for longer, more plush suspension travel Aluminum big bore shocks included as standard CNC machined, red anodized 17mm wheel hubs Steel slipper hub strengthening ring Sway bars fitted front and rear for improved cornering dynamics Wheelie bar with rubber tires Low-profile dBoots Copperhead 2 LP tires with vents to disperse water for improved durability Specifications: Scale: 1/10 Length: 21.54" (547 mm) Width: 17.72" (450 mm) Height: 8.11" (206 mm) Front Track: 17.72" (450mm) Rear Track: 17.72" (450mm) Wheelbase: 13.98" (355 mm) Weight: 9.26lbs (4.2kg) Drivetrain: 4WD Power Type: Electric Motor Type: Brushless - Sensorless Motor Size: 3668-2400Kv Gear Pitch: 0.8m Pinion: 13T Spur Gear: 57T Internal Gear Ratio: 2.85 Final Drive Ratio: 12.48 Wheel Hex Size: 17mm Max Battery Dimensions: 6.14x2.01x1.89 in (156x51x48 mm) Completion Level: Ready-To-Run Features: EXB 8S Aggressive tire design for excellent traction on multiple surfaces The black plastic wheels are durable and stylish Built around a durable tub style chassis to protect the electronics The Redcat Monster Truck foam filled tires are for all terrain bashing LED lights are included and can be installed by the user for night driving The Volcano-16 includes a USB charger and requires a USB outlet or power brick Two LI-ON batteries for more run time between charges A long range 2.4GHz radio with receiver is included Specifications: Length: 10.63 in. (270mm) Width: 8.46 in. (215mm) Height: 5.12 in. (130mm) Wheelbase: 6.89 in. (175mm) RTR: Ready-To-Run Motor/ESC: 390 Brushed Motor & Splashproof Brushed ESC/Receiver Radio: 2.4GHz Radio System Batteries: Qty. 2 - 7.4V Li-ion 800MAH Rechargeable Battery Packs (spare battery pack included) Charger: USB Li-ion Battery Balance Charger Cable Included Battery Connectors: T-style Chassis: Durable Plastic Tub Chassis Drive System: 4-Wheel-Drive Transmission: Single Speed Differentials: Front and Rear Gear Differentials Suspension: Independent Front and Rear Suspension Shocks: Adjustable Coilover Threaded Plastic Body Includes: (1) Volcano-16 Monster Truck (2) 7.4V 800mAh Li-ion Battery (1) USB Balance Charger (1) 2.4Ghz Radio System (1) LED Light Set Needed to Complete: Spektrum 780 kv Motor 160amp ESC 2-AA Batteries for the Transmitter USB Outlet or Power Brick Features: Kraton V5 Ready-to-Run 60+ MPH (97 km/h) speeds achievable in optimum conditions using a 6S LiPo battery and the include optional speed pinion gear Spektrum™ SLT3™ 2.4GHz 3-Channel Radio Spektrum™ SR315 Dual Protocol 3-Channel Receiver Spektrum™ S652 Digital Servo Spektrum™ Firma™ 150A Smart ESC Spektrum™ Firma™ 4074 2050Kv Brushless Motor Safe-D pinion gears EXB front brace compatible top plate Stronger chassis design Heavy-duty arms front and rear Updated rear shock tower geometry Large volume waterproof* receiver box Anodized aluminum chassis Strong composite chassis side pods Center body support and brace for maximum durability High downforce wing Oil-filled adjustable shocks Black-anodized aluminum front and rear shock towers Durable steel driveshafts throughout Heavy-duty drivetrain All-metal diff outdrives and gearbox internals Never-loose red aluminum servo saver Never-pop ball ends 4-Bolt center diff removal Easy-access sliding motor mount for quick motor removal Multi-split spoke wheels Durable wheel hubs for increased strength Hub nut O-rings Multi-terrain dBoots® COPPERHEAD 2™ tires Detailed decals Body print style in red/black or blue/black IC5® connectors (EC5™ compatible) 2-year limited warranty (see manual for details) *NOTE: For details on waterproof standards, please refer to the product instruction manua

Features: Factory-built, Pre-Painted and Ready To Run 4WD monster truck Aggressive looking polycarbonate body with skid plates for added protection Powerful 6S capable Hobbywing 150A ESC and 2100kV motor Hi torque steering servo Three high performance oil filled differentials 4mm anodized 7075 aluminum chassis 17mm aluminum hex hubs Red anodized aluminum threaded big bore shocks Heavy duty 4WD drivetrain, gears and CVA axles Sway bars to increase stability Wing and wheelie bar for added stability Specifications: Scale: 1/6 Length: 692mm Width: 470mm Height: 214mm Wheelbase: 441mm Electronic Speed Controller Type: 150A Brushless Motor Type: 2100kV Brushless Hex Size: 17mm Wheel Diameter: 112mm Wheel Width: 72mm Includes: (1) Redcat Machete 6S 1/6 RTR 4WD Electric Brushless Monster Truck Needed to Complete: (4) AA batteries for transmitter (1) Compatible battery charger 4S setup: (2) Matching 2S LiPo (4000mAh 40C minimum) with XT-90 plug 6S setup: (2) Matching 3S LiPo (4000mAh 40C minimum) with XT-90 plug

Features: Body: Knightrunner body thermoformed in high-strength polycarbonate Two-piece cab and bed design Clear windows Dropped bed design Injection-molded body accessories (door handles, wipers, mirrors, grill, and snorkel) Officially licensed DeMello injection-molded front and rear bumpers Officially licensed Front RunnerTM bed rack and tent Officially licensed MagnaflowTM exhaust Officially licensed 1.55" x 3.85" General GrabberTM A/T X tires Decal sheet with additional graphics and logos included Chassis: IFS (Independent Front Suspension) Stealth(R) X transmission Aluminum steering plates Aluminum steering rack Integrated servo winch mount Adjustable front and rear bumper mounts Adjustable injection molded rock sliders Threaded aluminum shock bodies CMS (Chassis Mounted Servo) Universal front drive axles Stamped steel frame rails Aluminum motor plate Optimized ball cups for more fluid axle articulation Telescopic driveshafts front and rear Extruded aluminum driveshaft splines One-piece rear axle design Machined input pinion gear Metal ring gear Machined steel top shaft Heavy duty 5mm diameter steel links Metal ball bearings included Steel 25T servo horn Specifications: Power Source: Electric Terrain: Off-Road Body Style: Truck Scale Size: 1:10 Scale Assembly Level: Ready-To-Run * This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger. Length: 462mm (18.19in) Width: 236mm (9.29in) Wheelbase: 325mm (12.8in) Weight: varies Internal Gear Ratio: varies Drive: 4WD

RC Discount Superstore 811 Huntingdon Pike Rockledge PA 19046 www.RCDISCOUNTSTORE.COM Features: 16% Larger footprint – longer and wider than the previous KRATON 4X4 4S platform for added stability Tough updated suspension arms to increase vehicle width Durable steel 1.35 module main diff gears and input gears in the front and rear gearboxes Strong CVD telescopic driveshafts front and rear Higher shock towers, longer shocks and wider suspension arms for longer, more plush suspension travel Aluminum big bore shocks included as standard CNC machined, red anodized 17mm wheel hubs Steel slipper hub strengthening ring Sway bars fitted front and rear for improved cornering dynamics Wheelie bar with rubber tires Low-profile dBoots Copperhead 2 LP tires with vents to disperse water for improved durability Specifications: Scale: 1/10 Length: 21.54" (547 mm) Width: 17.72" (450 mm) Height: 8.11" (206 mm) Front Track: 17.72" (450mm) Rear Track: 17.72" (450mm) Wheelbase: 13.98" (355 mm) Weight: 9.26lbs (4.2kg) Drivetrain: 4WD Power Type: Electric Motor Type: Brushless - Sensorless Motor Size: 3668-2400Kv Gear Pitch: 0.8m Pinion: 13T Spur Gear: 57T Internal Gear Ratio: 2.85 Final Drive Ratio: 12.48 Wheel Hex Size: 17mm Max Battery Dimensions: 6.14x2.01x1.89 in (156x51x48 mm) Completion Level: Ready-To-Run

Features: Shaft drive full-time 4WD touring chassis (FZ02L) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 452mm Width: 192mm Height: 135mm Wheelbase: 274mm Tread (F/R): F:174mm/R:174mm Tires (F/R): F:66×25mm/R:66x25mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools

Features: Refined shock tower design Full length motor cradle Updated wheels and tires Waterproof Maxx steering with same servo as the X-Maxx Modular chassis design GT-Maxx Aluminum Shocks Heavy duty suspension arms Full contact sealed bearings Shock-Absorbing cush drive Torque-biasing center drive Aluminum splined driveshaft Steel gear differentials Extreme-duty telescoping driveshafts Specifications: Length: 21.60 inches (549mm) Front Track: 14.50 inches (368mm) Rear Track: 14.50 inches (368mm) Ground Clearance: 1.92 inches (49mm) Weight: 9.7 lbs (4.4kg) Height (ride): 9.12 inches (232mm) Wheelbase: 12.96 inches (329mm) Shock Length: 4.89 inches (129.2mm) Tire Diameter: 5.51 inches (140mm) Wheels Diameter: 2.8 / 3.6 inches (71 / 91mm) Speed Control: Velineon VXL-4s Motor (electric): 540XL (2400 kV) Transmission: Single-Speed Overall Drive Ratio: 11.86 (24 / 50) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: Module 1.0 Chassis Structure/Material: Composite Modular Tub Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Double-shear bellcrank Radio System: TQi™ 2.4GHz Transmitter with TSM® receiver™ Servo: Torque: 285oz-in. Top Speed: 60+ MPH with 4S LiPo battery and optional gearing (sold separately) Skill Level: 4 Battery Tray: 162mm L x 45mm W x 43mm H Required Batteries: 4 “AA” (transmitter) Includes: Maxx, Ready-To-Race® model with Traxxas 540XL brushless motor VXL-4s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools

Features: Factory-built, Pre-Painted and Ready To Run 4WD monster truck Aggressive looking polycarbonate body with skid plates for added protection Powerful 6S capable Hobbywing 150A ESC and 2100kV motor Hi torque steering servo Three high performance oil filled differentials 4mm anodized 7075 aluminum chassis 17mm aluminum hex hubs Red anodized aluminum threaded big bore shocks Heavy duty 4WD drivetrain, gears and CVA axles Sway bars to increase stability Wing and wheelie bar for added stability Specifications: Scale: 1/6 Length: 692mm Width: 470mm Height: 214mm Wheelbase: 441mm Electronic Speed Controller Type: 150A Brushless Motor Type: 2100kV Brushless Hex Size: 17mm Wheel Diameter: 112mm Wheel Width: 72mm Includes: (1) Redcat Machete 6S 1/6 RTR 4WD Electric Brushless Monster Truck Needed to Complete: (4) AA batteries for transmitter (1) Compatible battery charger 4S setup: (2) Matching 2S LiPo (4000mAh 40C minimum) with XT-90 plug 6S setup: (2) Matching 3S LiPo (4000mAh 40C minimum) with XT-90 plug

Features: Factory-built, Pre-Painted and Ready To Run 4WD monster truck Aggressive looking polycarbonate body with skid plates for added protection Powerful 6S capable Hobbywing 150A ESC and 2100kV motor Hi torque steering servo Three high performance oil filled differentials 4mm anodized 7075 aluminum chassis 17mm aluminum hex hubs Red anodized aluminum threaded big bore shocks Heavy duty 4WD drivetrain, gears and CVA axles Sway bars to increase stability Wing and wheelie bar for added stability Specifications: Scale: 1/6 Length: 692mm Width: 470mm Height: 214mm Wheelbase: 441mm Electronic Speed Controller Type: 150A Brushless Motor Type: 2100kV Brushless Hex Size: 17mm Wheel Diameter: 112mm Wheel Width: 72mm Includes: (1) Redcat Machete 6S 1/6 RTR 4WD Electric Brushless Monster Truck Needed to Complete: (4) AA batteries for transmitter (1) Compatible battery charger 4S setup: (2) Matching 2S LiPo (4000mAh 40C minimum) with XT-90 plug 6S setup: (2) Matching 3S LiPo (4000mAh 40C minimum) with XT-90 plug

NEW Traxxas Bandit and New Color Duratrax Lockups C2 DTXC5101 Powerhobby esc and Motor Fans and Heatsink pt# PH-3000 Blue + ARC 1004 Blue Only for VXL Systems RPM Front Bumper pt# RPM81165 Light from Amazon look up rc car lights BANDIT VXL (#24076-4) SPECS Length: ­ 16.25 inches (413 mm) Front Track: ­ 9.84 inches (250 mm) Rear Track: ­ 9.84 inches (250 mm) Weight: ­ 48 ounces (1.36 kg) Height (overall): ­ 7 inches (178 mm) Wheelbase: ­ 11.25 inches (286 mm) Front Shock Length: ­ Long Rear Shock Length: ­ XX-Long Front Tires (Pre-Glued): ­ Alias® Ribbed 2.2" Rear Tires (Pre-Glued): ­ Alias® Step-Pin 2.2" Front Wheels: ­ 2.2" Black-Chrome (Tracer™) Rear Wheels: ­ 2.2" Black-Chrome (Tracer™) Electronic Speed Control: ­ VXL-3s™ Electronic Speed Control Motor (electric): ­ Velineon® 3500 Brushless Gear Ratio (Internal): ­ 2.72 (Final Drive: 7.97) Differential Type: ­ Planetary Steel Gear Gear Pitch: ­ 48-Pitch Transmission: ­ Magnum 272™ Steering: ­ Bellcrank Chassis Type: ­ Modified Tub Chassis Material: ­ Fiber-Composite Radio System (Transmitter): ­ TQi™ 2.4GHz (2-Channel) Radio System (Receiver) ­ Traxxas Stability Management® (#6533) Top-Speed: ­ 70+MPH** Skill Level: ­ 2 Battery Tray Dimensions: ­ 166 mm x 47.5 mm x 28 mm Required Items: ­ NiMH or LiPo Battery, Charger, 4 "AA" Batteries (Transmitter)

Features: Factory-built, Pre-Painted and Ready To Run 4WD monster truck Aggressive looking polycarbonate body with skid plates for added protection Powerful 6S capable Hobbywing 150A ESC and 2100kV motor Hi torque steering servo Three high performance oil filled differentials 4mm anodized 7075 aluminum chassis 17mm aluminum hex hubs Red anodized aluminum threaded big bore shocks Heavy duty 4WD drivetrain, gears and CVA axles Sway bars to increase stability Wing and wheelie bar for added stability Specifications: Scale: 1/6 Length: 692mm Width: 470mm Height: 214mm Wheelbase: 441mm Electronic Speed Controller Type: 150A Brushless Motor Type: 2100kV Brushless Hex Size: 17mm Wheel Diameter: 112mm Wheel Width: 72mm Includes: (1) Redcat Machete 6S 1/6 RTR 4WD Electric Brushless Monster Truck Needed to Complete: (4) AA batteries for transmitter (1) Compatible battery charger 4S setup: (2) Matching 2S LiPo (4000mAh 40C minimum) with XT-90 plug 6S setup: (2) Matching 3S LiPo (4000mAh 40C minimum) with XT-90 plug

RC Discount Superstore 811 Huntingdon Pike Rockledge PA 19046 www.RCDISCOUNTSTORE.COM Get all my parts from this store Features: Aggressive tire design for excellent traction on multiple surfaces The black plastic wheels are durable and stylish Built around a durable tub style chassis to protect the electronics The Redcat Monster Truck foam filled tires are for all terrain bashing LED lights are included and can be installed by the user for night driving The Volcano-16 includes a USB charger and requires a USB outlet or power brick Two LI-ON batteries for more run time between charges A long range 2.4GHz radio with receiver is included Specifications: Length: 10.63 in. (270mm) Width: 8.46 in. (215mm) Height: 5.12 in. (130mm) Wheelbase: 6.89 in. (175mm) RTR: Ready-To-Run Motor/ESC: 390 Brushed Motor & Splashproof Brushed ESC/Receiver Radio: 2.4GHz Radio System Batteries: Qty. 2 - 7.4V Li-ion 800MAH Rechargeable Battery Packs (spare battery pack included) Charger: USB Li-ion Battery Balance Charger Cable Included Battery Connectors: T-style Chassis: Durable Plastic Tub Chassis Drive System: 4-Wheel-Drive Transmission: Single Speed Differentials: Front and Rear Gear Differentials Suspension: Independent Front and Rear Suspension Shocks: Adjustable Coilover Threaded Plastic Body Includes: (1) Volcano-16 Monster Truck (2) 7.4V 800mAh Li-ion Battery (1) USB Balance Charger (1) 2.4Ghz Radio System (1) LED Light Set Needed to Complete: Spektrum 780 kv Motor 160amp ESC 2-AA Batteries for the Transmitter USB Outlet or Power Brick

RC Discount Superstore 811 Huntingdon Pike Rockledge PA 19046 www.RCDISCOUNTSTORE.COM Get all my parts from this store Features: Ready-to-run Spektrum™ SLT3™ 2.4GHz 3-Channel Radio Spektrum™ SR315 Dual Protocol 3-Channel Receiver Spektrum™ S652 Digital Servo Spektrum™ Firma™ 150A Smart ESC Spektrum™ Firma™ 4074 2050Kv Brushless Motor EXB compatible front brace Stronger rear brace mount Large volume waterproof* receiver box +1mm wheel hexes Stronger body mounts Anodized aluminum chassis Strong composite chassis side pods Center brace for maximum durability Center roll hoop interfaces with body roll cage for enhanced body durability Nerf bars for body and side impact support Realistic front and rear bumper protection Independent suspension for superior handling Flexible front bumper valance Heavy-duty suspension arms with red-anodized aluminum strengthening cap Oil-filled adjustable shocks Black-anodized aluminum front and rear shock towers Durable steel driveshafts throughout Heavy-duty drivetrain All-metal diff outdrives and gearbox internals Never-loose red aluminum servo saver Never-pop ball ends 5-Bolt center diff removal Easy-access sliding motor mount for quick motor removal Super-durable wheel hubs for increased strength Color-coordinated multi split-spoke wheels Multi-terrain dBoots® FORTRESS™ tires Multi-finish matte and gloss body

Part # GEA68006S10E5 Features: 4.35V HV lithium technology LED power status indicator informs you of battery health Voltage status indicator Self-Storage mode discharges battery to safe levels after 5 days of no use Overcharge prevention technology Specifications: Voltage: 6S (22.8V) Capacity: 6800mAh Discharge Rate: 100C Weight: 33.55oz (952g) Dimensions: 6.49x1.85x2.67" (165x47x68mm) (LxWxH) Connector Type: EC5

RC Discount Superstore 811 Huntingdon Pike Rockledge PA 19046 www.RCDISCOUNTSTORE.COM Get all my parts from this store Pre-built racing style monster truck with electronics, bodyshell and tyres installed Team Corally TOROX 185 ESC 3-6S with LiPo protection (programmable) Team Corally Kuron 2050kV 4-pole brushless motor 2-6S Varioprop®️ CR-7220-MG High Torque Digital Servo, Metal Gear, 20 Kg Torque Aluminium servo arm Ergonomic Varioprop®️ S2R transmitter, with interference-free 2.4GHz technology Separate splash-proof and dustproof electronic box with transponder mount Adjustable battery holder for all common LiPo batteries Full set of ball bearings, rubber sealed All transmission ball bearings are 8x16x5mm Hardened steel spur gear and motor pinion Three silicone fluid-filled & sealed metal differentials Quick & Easy diff access 2-piece aluminium motor holder with composite gear cover Complete metal drive train Steel front CVD joints Aluminium 17 mm drive hexes Oil-filled threaded 16 mm aluminium Big Bore shocks Shock spring perches locking system Milled aluminium shock towers, 5mm rear / 4mm front Independent Pivot Ball front suspension Independent double wishbone rear suspension Aluminium suspension mounts with composite cover Full set of machined steel turnbuckles with 7mm hexes Individually adjustable chassis and steering geometry Team Corally RSP anti-roll bar system, front + rear Aluminium chassis plate Bashproof double chassis brace system Front bumper with chassis protection Centre Roll cage mount Reinforced High Downforce Wing & Wing Holder High-speed Truggy Race Tires pre-glued on black race proven nylon rims Sturdy, elaborately printed polycarbonate body Huge selection of custom tuning products available

Hoss VXL 3S ESC VXL 3200kv Motor Roapex Tracker 12mm Belted For 1/10 Scale Big Rock Spektrum 80amp ESC BLX 3200kv Motor RC Discount Superstore 811 Huntingdon Pike Rockledge PA 19046 www.RCDISCOUNTSTORE.COM

Features EXB 7075 T6 5mm thick CNC aluminum laser-etched chassis plate EXB Red-anodized CNC aluminum front brace mount EXB Matte and gloss effect body Heavy-duty 8mm thick steel rear turnbuckles Heavy-duty 7mm thick steel steering turnbuckles Oil-filled adjustable 20mm bore shocks with 6mm thick shock shafts and new plush shock tuning Heavy-duty servo saver springs Front and rear sway bars Red-anodized aluminum 49 and 56 series motor plates dBoots Back-Flip tires 47T and optional 39T Spur Gear Servo mounts for 1/5 and 1/6 servos Wheelie bar Front bumper with impact-absorbing design Easy-access 3-bolt sliding motor mount for quick motor removal Ultra-thick composite front and rear shock towers Black anodized aluminum rear lower chassis brace Multi-structured center brace system for maximum durability Heavy-duty drivetrain Easy-access front and rear diff module design All-metal diff outdrives and gearbox internals Durable steel driveshafts Durable wheel hubs for increased strength Easy-access waterproof electronics module Center body support and brace for maximum durability Strong composite chassis side pods 2-year warranty (see website support for details)

Tires Powerhobby Gripper Part# PHT5101 Gold PHT5102 17mm Hex 1/8 Scale RC Discount Superstore 811 Huntingdon Pike Rockledge PA 19046 www.RCDISCOUNTSTORE.COM Get all my parts from this store Features: Proto Form Corvette C8 Body Part# 1577-00 Spektrum® 3-Channel DX3™ 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control™) Compatible with Spektrum® Dashboard™ app for iOS or Android ARRMA® ADS-15M Waterproof Servo (For details on waterproof standards, please refer to the product instruction manuals) Spektrum® Firma™ 150A Smart ESC Spektrum® Firma™ 4074 2050Kv Brushless Motor with Safe-D input gears Muscle car handling with regular front and larger rear tires Front and rear gearbox ratios matched to tire sizes Customizable scale muscle car looks Includes interchangeable accessory kit and decals Multi-part undercut body design Adjustable front and rear body mounts Aerodynamically adjustable wing 3mm Plate, 6061-T6 anodized aluminum chassis Center brace for maximum durability Heavy-duty drivetrain with durable steel driveshafts throughout High-speed center driveshaft support Three oil-filled metal gear diffs All-metal diff outdrives and gearbox internals Oil-filled, adjustable, anodized aluminum shocks Black-anodized aluminum front and rear shock towers Front bumper and splitter Rear diffuser with exhaust detailing Waterproof receiver box (For details on waterproof standards, please refer to the product instruction manuals) Large battery trays Five-spoke wheels Durable wheel hubs

Features: 1/8th Scale basher designed specifically for 6S power 20% larger and 75% thicker drive gears Triangulated chassis structure for superior chassis strength Remove and replace the body in just seconds with exclusive clipless body Includes a high-performance metal gear servo that produces over 347oz-in of torque 6S power system for brutal power Durable Sledgehammer tires are used for great handling and traction Specifications: Truck: Length (including wing): 23.78 inches (604mm) Front Track: 18.10 inches (459mm) Rear Track: 18.10 inches (459mm) Ground Clearance: 1.95 inches (50mm) Weight (no battery): 12.74 pounds (5.77kgs) Height (overall): 8.43 inches (214mm) Wheelbase: 15.10 inches (384mm) Shock Length (front): 5.12 inches (128mm) Shock Length (rear): 5.67 inches (144mm) Tire Diameter: 6.7 x 3.3 inches (170mm x 84mm) Wheel Diameter: 3.8 inches (97mm) Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip ESC: Model: Velineon VXL-6s Input Voltage (cells): 4s–6s LiPo (max: 25.2 volts) BEC Voltage: 6.0 V BEC Current Continuous: 10 A BEC Current Peak: 20 A Reverse Delay: Yes, with lockout Motor: Type: 2000 kV sensorless brushless Connector Type: Traxxas 6.5mm bullet connectors Includes: (1) Traxxas RTR Sledge Monster Truck (1) TQi 2.4GHz radio system (1) Jumper plug (for 4s battery use) (1) Quick Start Guide High quality maintenance tools Needed to Complete:

RC Discount Superstore 811 Huntingdon Pike Rockledge PA 19046 www.RCDISCOUNTSTORE.COM Features: 4s 16% Larger footprint – longer and wider than the previous KRATON 4X4 4S platform for added stability Tough updated suspension arms to increase vehicle width Durable steel 1.35 module main diff gears and input gears in the front and rear gearboxes Strong CVD telescopic driveshafts front and rear Higher shock towers, longer shocks and wider suspension arms for longer, more plush suspension travel Aluminum big bore shocks included as standard CNC machined, red anodized 17mm wheel hubs Steel slipper hub strengthening ring Sway bars fitted front and rear for improved cornering dynamics Wheelie bar with rubber tires Low-profile dBoots Copperhead 2 LP tires with vents to disperse water for improved durability Specifications: Scale: 1/10 Length: 21.54" (547 mm) Width: 17.72" (450 mm) Height: 8.11" (206 mm) Front Track: 17.72" (450mm) Rear Track: 17.72" (450mm) Wheelbase: 13.98" (355 mm) Weight: 9.26lbs (4.2kg) Drivetrain: 4WD Power Type: Electric Motor Type: Brushless - Sensorless Motor Size: 3668-2400Kv Gear Pitch: 0.8m Pinion: 13T Spur Gear: 57T Internal Gear Ratio: 2.85 Final Drive Ratio: 12.48 Wheel Hex Size: 17mm Max Battery Dimensions: 6.14x2.01x1.89 in (156x51x48 mm) Completion Level: Ready-To-Run Typhon 3S (1) ARRMA® TYPHON™ 4X4 3S BLX 1/8 Scale 4WD Electric Speed Buggy RTR (1) BLX100 2S/3S Waterproof* ESC (1) Spektrum™ Firma™ 3660 3200Kv Brushless Motor (1) Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter (1) Spektrum™ SLR300 Receiver (1) Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo light kit