OutdoorFamily

@surfandturffamilyadventure9139 #work #woodworking #wood #redwood #charcuterie I had some pieces of redwood left over from a fence building job. I edge glued the best pieces together. Then smoothed the board down with a hand plane and sanded the wood with 220 grit sandpaper. Finally I finished it with a mixture with mineral oil and bees wax. The rose is lasered on with an epilog laser engraver.

@SurfandTurfFamilyAdventures #woodworking #cooking #cutting #build #shorts Watch my process of building a six-foot-long cutting board. I start by gluing black walnut, maple, cherry wood. Let the wood dry for 48 hours. Pass the laminated wood through an 18-inch planer/surfacer to level out all of the wood. I cut the glued panel down to two 24-inch boards that will be finished into brisket, tri-tip, or roast sized cutting boards. Sanding starts at 80 grit sandpaper and finishes at 400 grit sandpaper. In between I use 100, 120, 150, 180, 220, 320 and finally 400 grit sandpaper. The most difficult part of this particular board is the Juice Groove. I finished the board with a mixture of mineral oil and bees wax that I make myself.

​ @surfandturffamilyadventure9139 #funny #kids #camping #peeps #fire We decided to go camping. The best place I could think to camp on short notice was the backyard. So, we packed up and I took the kids on a drive. We ended up driving through a farmer's field and pretended to hike through an Almond Orchard. We made it back to our backyard with our car in sight and set up the tent. We cooked outside and slept under the stars. We ate hamburgers for dinner and Roasted Peeps for dessert. IT was a wonderful time spending time with my kids on a Saturday.

@surfandturffamilyadventure9139 #plumbing #shorts #diesel #tank #work Click the link for the full video: https://youtu.be/HM9udnng6og I install a Lund 50-gallon external fuel tank. After mounting the tank to the bed, I plumbed the tank into my existing fuel tank. The process to install the tank took multiple days and was more difficult than I expected.

​ @surfandturffamilyadventure9139 #deals #work #kids #trailer #dad #fun #plumbing If you want to watch to full video: https://youtu.be/zXJunsSl-qA I recently bought a Lund Transfer Tank on an Auction Site. It is beat up, yet new. Before I stick into the bed of a truck I should test for leaks. I come up with a complicated and expensive way to check for leaks. I check to see if a purchase was worth the money.

​ @surfandturffamilyadventure9139 #kids #nerfwar #kids #nerfbattle #funny #play #funnyvideo Here is the full length Nerf Battle: https://youtu.be/zja8A76smgU We were testing the Nerf Guns to get ready for a huge event. When suddenly testing the Nerf guns turned into a battle. It turned out to be a great battle that ended with smiles and many dramatic fake deaths. We hope you enjoyed watching us play and have fun together. If you want to see more adventures check out our Family Adventures playlist. We post new videos every Friday. Here is a link to our newest indoor Nerf Battle. https://youtu.be/mMJcVwKQZtg

​ @surfandturffamilyadventure9139 #firstride #bikes #kids #trainingwheels #funny #play #beginner #dad #bike #hurt #fear Here is the link to the Full Video: https://youtu.be/6BQ2JfaG4WU Finally it is time to remove the Training wheels from the 4 year olds bike. This is a big day. There are three crashes that never resulted in any no major injuries. We did stage the blood for dramatic effect. All fun and kidding aside it was a successful day of taking the training wheels off the bike. I was dreading this day, because I was unsure how Eleanor would react to giving up her training wheels. She was ready this time and rode her bike with ease. I am glad that it was captured on film to remember this wonderful event.

@surfandturffamilyadventure9139 #sawstop #work #shorts #woodworking I am amazed that the saw stop mechanism works like it is designed. I was cutting along and WAM that blade dropped out of sight and stopped before I could do anything. After removing the saw stop mechanism I was enamored by the parts that saved my hand. Thanks Saw Stop!

@surfandturffamilyadventure9139 #shorts #work #building #logs I decided to use telephone poles to build an extension off of a hay barn. The notches needed to build the lean too were extremely hard to get okay. It seems to be holding.

@surfandturffamilyadventure9139 #fix #maintenance #skills #try #construction I fixed a torn screen door. After buying the special tool and materials needed for the job, I read the directions. I followed the directions that the screen material provided, and the project turned out great. The project cost me $30 including tools and materials. All of the supplies were bought at my local Lowes. The tools needed were: 1. Utility Knife 2. Spline Tool 3. Flathead Screwdriver (for corners) 4. Brush to clean the spline Groove Materials Needed 1. Screen Material (I used the Pet Material 36"x84") 2. Spline (I bought 2 sizes 1.6 and 1.4 spline material)

@surfandturffamilyadventure9139 #work #fire #scary #farming #heat This is an extremely hot fire that ripped through some dry brush. Luckly there was enough defendable space, so the fire didn't spread too far.

@surfandturffamilyadventure9139 #food #youtubeshorts #nachos #castironcooking I make super cheesy nachos using a 14 inch cast iron pan with lid. The nachos baked with the lid on at 410 degrees for 20 minutes. I served the nachos with Mexican Creama and Salsa toped with a few black olives.

@surfandturffamilyadventure9139 I fix a leaking pipe underground. It takes so many different products to fix problems underground.

@surfandturffamilyadventure9139 #woodworking #work #building #workshop #clipboard #custom #teacher #project In this video I show you how to build a custom clipboard. It starts by removing the clipboard clip. Then shows how to add Countertop Laminate with 3M spray adhesive. Next trimming the excess laminate off of the clipboard and filing down the edge. Next drill out the holes to prepare for putting the clipboard back together. If you have access to a Laser Engraver the next part of the video shows what is possible with a 30-watt Epilog Laser Engraver and Corel Draw. Finally removing in glue from the finished product and it is ready to use.

@surfandturffamilyadventure9139 #shorts #kids #funny #safe Kids have fun dragging eachother around on office chairs and electric chairs.

​ @surfandturffamilyadventure9139 #undeniableblessing #family #churchcamp #fun Join the Free Methodist Church in Nevada City June 12, 2023, for Family Camp. The video shows only a few of the amazing activities and amenities of Diamond Arrow Campground. If you have any questions and want to know how to sign up for this renewing experience visit undeniableblessing.org. Things we need to put this camp on is: Camp Counselors Funds for families in need People of ALL ages that want to experience this camp. Leaders Drivers

@surfandturffamilyadventure9139 #funny #easter #family #play #dad What an amazing egg hunt for the kids and adults. Everyone joins in to hunt easter eggs in dramatic fashion that ends in one winner. Watch to see who wins the kid and adult hunt this year.

@surfandturffamilyadventure9139 #shorts #short #woodworking #work #handmade #amazing #chess This chessboard was made from a piece of junky T111 plywood. We used epoxy to fill in the holes and gouges. Then lasered on the squares. The chess pieces were made from wooden wheels.

​ @surfandturffamilyadventure9139 #egg #easter #funny #family What an amazing egg hunt for the kids and adults. Everyone joins in to hunt easter eggs in dramatic fashion that ends in one winner. Watch to see who wins the kid and adult hunt this year. Click on the link to watch the full video: https://youtu.be/5YIr1ndtdiw

​ @surfandturffamilyadventure9139 #nerfwar #battleroyale #funny #kids #nerfbattle #play The kids challenged the adults to an outdoor Nerf War. The kids dress as Roman Soldiers and lured the adults out to be slaughter on the grass. The war ends with many casualties and one adult is taken down with a sword. Here is the link to the full NERF WAR: https://youtu.be/AEE8acF3bgE

@surfandturffamilyadventure9139 #shorts #stort #fix #fun In this video this is a short version of a current video on the channel. The full video goes into depth on fixing a Comet pump, checking the fix, and looking at the pollination status of the Almond Orchard. Link to full video https://youtu.be/5R4_RluoXkY

@surfandturffamilyadventure9139 #nerfwar #battleroyale #funny #kids The kids challenged the adults to an outdoor Nerf War. The kids dress as Roman Soldiers and lured the adults out to be slaughter on the grass. The war ends with many casualties and one adult is taken down with a sword.

@surfandturffamilyadventure9139 #nerf #funny #dad #challenge #easter #play In preparation for the upcoming family Easter Egg Hunt. We begin the training regimen to make sure we come out on top. Dad uses a Nerf Gun to encourage awesomeness. The exercise training regimen is practiced and then the kids retaliate with the Nerf gun against the Dad.

@surfandturffamilyadventure9139 #shorts #short #woodworking #song The song seemed fitting for the woodworking process I was doing at the time. The table router is extremely loud and obnoxious. The song is way more pleasant to listen to then the noise of the machine.

@surfandturffamilyadventure9139 #shorts #woodworking #router #funny #workfromhome #work While capturing a how-to video on using the table router I added this song to the section of this clip. I like the clip and music.