Kubota BX25D Mower Deck Blade Sharpening
Kubota BX25D Mower Deck Blade Sharpening.
With my John Deere 5075E broke (Again), I'm down to the Kubota to do at least some of the mowing. Now, I'm not going to try and mow all 35 acres, but there are some areas I can clean up.
#diy
#honda
#hondarecon
#atv
#welding
#relaxing
#farming
#solar
#diysolar
#pontoonboat
#livewell
#leather
#tandy
#diyleather
#knifemaking
#woodcraft
#leathercraft
#mudmixer
#diyconcrete
#concrete
#24hoursoflemons
#kubota
#kubotarepairs
#ufo
#uap
#laserpecker
#laserengraving
#harborfreight
#calm
#chill
#satisfying
#nsfw
#woodworking
#woodturning
#beginnerwoodturing
#hobbies
#crafts
#retirement
#retirmentplanning
#woodprojects
#woodturningprojects
#simplewoodprojects
#vw
#vwtransporter
#vwbus
#gmcsafari
#chevyastro
#beginnerwoodworking
#virginvoyages
#cleetusmcfarland
#vicegripgarage
#polebarngarage
#marlingbaits
#superfastmatt
#musti1
#watchweswork
#thefatelectrician
#robotcantina
#thewhyfiles
#jimrodgerswood
#dieselcreek
#nononsenseknowhow
#hotwife
46
views
Woodturning Fail
I was turning a small dish out of Purpleheart wood and I was using Cole jaws for the first time.
I've since gone to a rubber type cloth to hold the piece to the Cole jaws which works better.
10
views
Cast Iron Spatula - Full Video: https://youtu.be/zii3vcmKrg4
My daughter requested a cast iron spatula, so I made her one.
Original Full Video: https://youtu.be/zii3vcmKrg4
8
views
Laser Engraved Baseball - Full Video: https://youtu.be/EZIWEmWGWlI
My grandson is very good at baseball so I decided to figure out how to laser engrave a baseball.
Hint: Not as simple as it sounds
Full Video: https://youtu.be/EZIWEmWGWlI
7
views
Kubota 900 / 1120 Relay & Fuse Location - Cooling Fan Kept Running
Kubota 900 / 1120 Relay & Fuse Location - Cooling Fan Kept Running
#diy
#honda
#hondarecon
#atv
#welding
#relaxing
#farming
#solar
#diysolar
#pontoonboat
#livewell
#leather
#tandy
#diyleather
#knifemaking
#woodcraft
#leathercraft
#mudmixer
#diyconcrete
#concrete
#24hoursoflemons
#kubota
#kubotarepairs
#ufo
#uap
#laserpecker
#laserengraving
#harborfreight
#calm
#chill
#satisfying
#nsfw
#woodworking
#woodturning
#beginnerwoodturing
#hobbies
#crafts
#retirement
#retirmentplanning
#woodprojects
#woodturningprojects
#simplewoodprojects
#vw
#vwtransporter
#vwbus
#gmcsafari
#chevyastro
#beginnerwoodworking
#virginvoyages
#cleetusmcfarland
#vicegripgarage
#polebarngarage
#marlingbaits
#superfastmatt
#musti1
#watchweswork
#thefatelectrician
#robotcantina
#thewhyfiles
#jimrodgerswood
#dieselcreek
#nononsenseknowhow
#hotwife
24
views
1
comment
Harbor Freight Propane Generator Conversion - Full video: https://youtu.be/7yw1lzLry3w
Converted an old Harbor Freight gasoline generator to a multi-fuel (propane and gasoline generator.
Works great in both modes.
Full video: https://youtu.be/7yw1lzLry3w
15
views
Hot Tub Winterizing - Full Video: https://youtu.be/P_k6RE_T48U
Since I only do it one a yea, this video is to remind me how to winterize my hot tub.
Full Video: https://youtu.be/P_k6RE_T48U
8
views
Rockler Beginners Pen Turning Kit - Full video: https://youtu.be/DsLj7MwbSso
My first attempt in making a pen.
Full video: https://youtu.be/DsLj7MwbSso
17
views
Laser Engraved Decision Dice - LaserPecker - Full Video: https://youtu.be/vDK_849JcE8
Deciding your evenings can be difficult sometimes. With these dice the decisions will be made for you.
Full Video: https://youtu.be/vDK_849JcE8
9
views
Astro / Safari Door Handle Replacement - Full Video: https://youtu.be/ARZbVuxO9qs
This video shows how to remove the door handle without removing the door panel.
Full Video: https://youtu.be/ARZbVuxO9qs
6
views
Kubota BX Starter Remove and Replace
Kubota BX Starter Remove and Replace
Here is a quick video on the removal and replacement of the starter on the Kubota BX series.
Battery Removal: https://youtu.be/3CwliUNqipA
Hood Removal: https://youtu.be/uwJieqiFFPI
Cowling Removal: https://youtu.be/x28NCSPV2W0
#diy
#honda
#hondarecon
#atv
#welding
#relaxing
#farming
#solar
#diysolar
#pontoonboat
#livewell
#leather
#tandy
#diyleather
#knifemaking
#woodcraft
#leathercraft
#mudmixer
#diyconcrete
#concrete
#24hoursoflemons
#kubota
#kubotarepairs
#ufo
#uap
#laserpecker
#laserengraving
#harborfreight
#calm
#chill
#satisfying
#nsfw
#woodworking
#woodturning
#beginnerwoodturing
#hobbies
#crafts
#retirement
#retirmentplanning
#woodprojects
#woodturningprojects
#simplewoodprojects
#vw
#vwtransporter
#vwbus
#gmcsafari
#chevyastro
#beginnerwoodworking
#virginvoyages
#cleetusmcfarland
#vicegripgarage
#polebarngarage
#marlingbaits
#superfastmatt
#musti1
#watchweswork
#thefatelectrician
#robotcantina
#thewhyfiles
#jimrodgerswood
#dieselcreek
#nononsenseknowhow
#hotwife
44
views
1
comment
Delta 46-460 Wood Lathe - 7 Month Review - Full Video: https://youtu.be/HlTsiWtgOSk
I've had the lathe for 7 months and made dozens of turnings. It was rocky at first, but now the unit is running great.
Full Video: https://youtu.be/HlTsiWtgOSk
21
views
My New Welder - Harbor Freight Titanium 200 - Full Video: https://youtu.be/LUEIUeZ7eI4
My 12 year old Lincoln Weld Pak finally just quit.
I've been looking a multi-process inverter machines for a while and this was about the only one I could afford. Well justify since I don't make an income off welding.
Keep in mind I'm not a welder and the welds in this video and the very first 4-5 weld I made with this machine.
Full Video: https://youtu.be/LUEIUeZ7eI4
24
views
1997 Safari/Astro No Heat - Full Video: https://youtu.be/vL4UyBv0tvQ
It's winter and my heater doesn't work. I've had to make multiple early morning drives and it was tough. With no heat I also had no window defroster.
I'm not a mechanic so my troubleshooting method was probably not the most direct, but in the end I found the problem and now have heat.
Full Video: https://youtu.be/vL4UyBv0tvQ
13
views
Very Dim GMC Safari / Chevy Astro Seamed Beam Headlight - Full Video: https://youtu.be/88f8Pk9Arn8
I usually don't drive my 1997 GMC Safari at night. The other night we were coming home from the airport and were taking backroads which have no street lighting.
The headlights on the van were awful. It appeared only the passenger headlight was working but when we got home I check and both were working. Well, sort of. The driver's side headlight was considerable dimmer.
14
views
Kubota BX Engine Cowling Removal
Kubota BX Engine Cowling Removal
I needed to work on my Kubota BX25D and the best way would be to remove the engine cowling.
Here is a link to the hood removal: https://youtu.be/uwJieqiFFPI
#diy
#honda
#hondarecon
#atv
#welding
#relaxing
#farming
#solar
#diysolar
#pontoonboat
#livewell
#leather
#tandy
#diyleather
#knifemaking
#woodcraft
#leathercraft
#mudmixer
#diyconcrete
#concrete
#24hoursoflemons
#kubota
#kubotarepairs
#ufo
#uap
#laserpecker
#laserengraving
#harborfreight
#calm
#chill
#satisfying
#nsfw
#woodworking
#woodturning
#beginnerwoodturing
#hobbies
#crafts
#retirement
#retirmentplanning
#woodprojects
#woodturningprojects
#simplewoodprojects
#vw
#vwtransporter
#vwbus
#gmcsafari
#chevyastro
#beginnerwoodworking
#virginvoyages
#cleetusmcfarland
#vicegripgarage
#polebarngarage
#marlingbaits
#superfastmatt
#musti1
#watchweswork
#thefatelectrician
#robotcantina
#thewhyfiles
#jimrodgerswood
#dieselcreek
#nononsenseknowhow
#hotwife
29
views
1997 GMC Safari Crank No Start When Cold - Full Video: https://youtu.be/49XkxwQO_jo
My 1997 GMC Safari will crank but not start in cold weather. Since it just started getting cold, it's time to see if we can figure this out.
Since we had to wait for parts and cold weather, it took a couple of weeks to make this video. Which is why I kept repeating the myself. Sorry.
I also kept forgetting what I paid for the parts so here is the information:
Crankshaft Position Sensor, which I kept calling a "crankshaft positioning sensor": $11.99
Ignition Coil: $18.70
Both were purchased from Amazon (Not a Sponsor)
The photo of the 1997 GMC Safari is from an ad in AutoTrader
9
views
Ingersoll Rand Angle Die Grinder (301B) - Didn't Go Well - Full Video: https://youtu.be/ig9mXoYXk3c
Right out of the box it had a problem. I even tried to adjust and repair it.
Full Video: https://youtu.be/ig9mXoYXk3c
6
views
70 Year old table saw stopped turning - Full Video: https://youtu.be/S-GvrbdjwPo
This table saw belonged to my wife's grandfather, so keeping it running is important to us.
The best manufacturing date I could find for this model was 1951.
This is not a "How To" video, just me working on the table saw.
Full Video: https://youtu.be/S-GvrbdjwPo
6
views
Gasoline (2 Stroke) Powered Tee Post Driver - Full Video: https://youtu.be/pNYTbd8JCXQ
I need to run a bunch of fencing so I decided to get a gas powered tee post driver.
Here is what I got: XtremepowerUS 52cc Gas-Powered T Post Driver Fence Post Driver Gasoline Piling 2-Stroke Engine EPA Certificated w/Storage Case.
UPDATE: I heard back the customer service and was advised to use 30 weight oil in the gear case.
Full Video: https://youtu.be/pNYTbd8JCXQ
6
views
GMC Safari / Chevy Astro Van Sticking Sliding Door - Full Video: https://youtu.be/ggql0ASnZMI
Ever since I bought this van, I've had to open the sliding door with 2 hands. As you can image this is very annoying when you're carrying something.
The first thing I did was to inspect for broken parts or parts with excessive wear. Not finding anything obvious, I starting spraying everything with a lubricant.
Much to my surprise, this solved the problem.
Full Video: https://youtu.be/ggql0ASnZMI
6
views
Kubota BX Hood Removal
Kubota BX Hood Removal
I needed to work on my Kubota BX25D and it would be easier if I took the hood all the way off.
#diy
#honda
#hondarecon
#atv
#welding
#relaxing
#farming
#solar
#diysolar
#pontoonboat
#livewell
#leather
#tandy
#diyleather
#knifemaking
#woodcraft
#leathercraft
#mudmixer
#diyconcrete
#concrete
#24hoursoflemons
#kubota
#kubotarepairs
#ufo
#uap
#laserpecker
#laserengraving
#harborfreight
#calm
#chill
#satisfying
#nsfw
#woodworking
#woodturning
#beginnerwoodturing
#hobbies
#crafts
#retirement
#retirmentplanning
#woodprojects
#woodturningprojects
#simplewoodprojects
#vw
#vwtransporter
#vwbus
#gmcsafari
#chevyastro
#beginnerwoodworking
#virginvoyages
#cleetusmcfarland
#vicegripgarage
#polebarngarage
#marlingbaits
#superfastmatt
#musti1
#watchweswork
#thefatelectrician
#robotcantina
#thewhyfiles
#jimrodgerswood
#dieselcreek
#nononsenseknowhow
#hotwife
51
views
John Deere 5075E Running Rough / Surging - Full Video: https://youtu.be/SXDKK0PaIVY
My John Deere 5075E Starting running rough, surging and had low power.
My first thoughts was the fuel Filter was clogged. Turns out that both had problems.
I cleaned the in-tank filter and replaced the main filter.
Full Video: https://youtu.be/SXDKK0PaIVY
18
views