Lematec

How to make Halloween decorations by sandblasting? Check the video and make your craft now! Create your idea to show on wood or glass for Halloween! #shorts #halloween #decorations #DIY #craft #woodworking #sandblasting #sandblaster #lematec

Lematec air flow valve with digital pressure gauge, easy to use for air tools #shorts

WATCH: unboxing the Lematec Sandblasting Gun Kit- AS118-2C. UNBOXING, REVIEW, & DEMO! More detail: https://www.lematec-tools.com/lematec-gravity-feed-with-siphon-feed-sandblaster-gun-as118-2c *The AS118-2 Premium Sandblaster Gun Kit operates at 90 PSI-150 PSI and Airflow of 12 CFM at 100 PSI. *The Sandblaster features a media compartment that supports most blasting materials from aluminum oxide to coal slag and much more. *The AS118-2 Sandblaster Gun Kit features siphon function with 2 control regulators making larger projects a breeze. *This sandblaster gun supports different media like steel grit, glass beads, walnut shells, silicon carbide, aluminum oxide and more. *Suit for the workshop, home, garden, DIY, wood, glass and so on. *Make Automotive Work Quick and Easy such as Engine Block cleaning, Frame Rust Removal, and much more with this Sandblasting Gun. Ceramic Nozzle for more application and durability! ►Amazon: shorturl.at/biw13 ►Contact us-Lematec CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co vic@lematec.co Website: https://www.lematec-tools.com/ #lematec #sandblaster #sandblasting #unboxing #unboxingvideo #AS118 #reviewe #best #top #demo

Welcome to Lematec, this video will show you how to operate air foam gun set- No.AS119-3A-1 ►Contact us-LEMATEC CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co, vic@lematec.co Website:https://www.lematec-tools.com/ #carwash #airfoamgun #carwashing #lematec #airtool #diy

#shorts What is the best media for sandblasting? How to choose sand/media for your project? 1. Sandblasting is a type of abrasive blasting that uses sand and compressed air to remove paint, rust, and other surface contaminants 2. The most common types of sand used in the process are silica-based sands like quartz or silicon carbide 3. There are two ways you can choose your sand - by particle size (fine, medium) or by material (silicon carbide). 4. Silicone carbide is typically preferred because it's more durable than fine silica sands. 5. Using the right sand media will save you time and get great results. So what is the best media for sandblasting? Actually, it depends on your applications, such as removing the rust, painting or dirt, etc., by sandblaster gun with the following sandblasting media to reference. *Aluminum Oxide Grit: An extremely sharp, long-lasting blasting abrasive that can be recycled many times. It is available in 99.5% pure white grade and commonly standard brown. It is often used in surface treatments and preparations. *Soda: Soda abrasive is from baking soda or bicarbonate of soda. It offers non-destructive cleaning and is very popularly used by operators. It removes rust from metals without causing depression or damaging the metal beneath the rough surface. *Coal Slag / Aluminum Silicate: It is a dispensable abrasive, which is a by-product of coal-fired electric power generation plants. It has less dust than Copper Slag. It is often used in open blasting operations in the oil- and shipyard industry and other metal surface treatments. *Crushed Glass Grit: Crushed Glass Grit is 100% recycled glass beads and is considered to be eco and health-friendly as it eliminates the presence of airborne carcinogens. It is non-toxic and non-hazardous. This is used in profiling and removal of coatings and surface contamination and can be used around water. *Steel Grit: Softer than Aluminum Oxide Grit but still have a very high hardness quality. It has very fast stripping action and shot peening applications. It is commonly used in cleaning, etching and surface preparations. *Staurolite: It is a Silicate of Silica and Iron and is generally used to remove thin coatings, rust, and mill scale. Its sub-angular shape is ideal for applications where a minimal surface profile is required. Perfectly used in stripping off surfaces in storage tank & tower construction, structural & plate steel blasting, and steel fabrication. *Glass Beads Glass Beads are manufactured into preformed ball shapes which is very effective in leaving very smooth surfaces. It produces a super smooth and brighter finish compared to angular abrasives. Glass Beads can be recycled approximately up to 30 times. Commonly used for automotive restoration, stainless steel fabrication, polishing of castings and light deburring of metal molds and parts. *Steel Shot Steel Shot is manufactured into a spherical pellet-type abrasive made from carbon steel. It often produces a very smooth surface after use. Steel shot abrasive is often used in cleaning and polishing metal surfaces and parts in automotive, aerospace, construction, foundry, shipbuilding, rail, and more. *Steel Grit Softer than Aluminum Oxide Grit but still have a very high hardness quality. It has very fast stripping action and shot peening applications. It is commonly used in cleaning, etching and surface preparations. *Corn Cob Grit Corn Cob Grit is an organic, soft and natural abrasive from hard cob. It is tumbling and absorbent that dries surfaces. Corn cob grit is non-toxic and safe for operators. It is best used on wood surfaces and does not create any damage on the treated surface. It is used in oily and moist surfaces that quickly absorb it while finishing rough parts. *Walnut Shell Grit It is a very versatile soft abrasive, organic and biodegradable. Same as corn cob, it is non-toxic and imposes no hazard on health. Best used in stripping and cleaning delicate surfaces and parts, Walnut Shell Grit provides effective applications such as cleaning hardwoods and aircraft and automotive stripping. *Copper Slag / Iron Silicate In contrast to its name, it contains almost no copper. It is referred to as the best abrasive to use when ranked on cutting speed and cost per sq. ft. It comes in extra fine grade abrasive that is used for surface blast-cleaning carpets, plastic and wood. *Garnet Garnet is a natural silicate mineral deposit. It has a high stripping rate, very low dust, and the lowest consumption rate. Now you know how to choose the best media for sandblasting, but how about sandblaster? It's obsessively the Lematec made sandblasting guns are the best air sandblasting tools you can trust. Support to use of any kind of sand/media for multiple applications. #sandblasting #shorts #guide #sandblaster #sandmedia #sand #diy

LEMATEC Sandblaster Gun Kit AS118 Unboxing video. The Ultimate Weapon Against Rust and Paint Removal! The AS118 Series Sandblaster includes either 2 Steel Tips or 2 Ceramic Tips depending on which kit you ordered, both available for black and blue models. When you buy our AS118 Black Sandblaster, you will receive a complete kit to get you going. You will receive 1 sandblaster gun with a quick start media guide, 2 steel nozzles or 2 ceramic tips depending on which kit you have purchased, 1 ¼” quick connector, 1 safety glasses, and stainless-steel media mesh filter. The stainless steel media mesh filter can be used to ensure proper media size is being used but is not necessary. Our sandblaster is so easy to use. Just insert the steel nozzle or ceramic tip and lock it with the black POM ring. Wear safety glasses, connect the quick connector, turn on the sandblaster through the adjustable knob, and start blasting! Turn your trash into treasure with the Sandblaster Gun Kit. This amazing tool supports unlimited media types making it a versatile tool for any home or shop. Get Your Today!. *Amazon: shorturl.at/jLNX3 ►Contact us-LEMATEC CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co vic@lematec.co Website: https://www.lematec-tools.com/ #lematec #sandblaster #sandblasting #unboxing #unboxingvideo #AS118 #reviewe #best #top

How to etch the glass by sandblasting? We will use the Lematec sandblaster gun. We have a big discount NOW: https://www.amazon.com/LEMATEC-Multipurpose-Sandblasting-Connector-Prevention/dp/B01M0CRUUM Get one to decorate your house for Halloween, Christmas...etc. Make your home unique. What is sandblasting glass? Sandblasting glass means putting some abrasives into a portable sandblaster, using a stencil of your choice to create the image you want on the glass, and then spraying the abrasives on the stencil revealing the picture. How to sandblast glass? Step1:Put the abrasives into the reservoir of the sandblasting gun. Step2: Secure the stencil on the glass. You should take time to clean the surface in order to make sure its' left clean and dry. After you clean, you also need to mask out the area you do not want to sandblast with some paper and masking tape. Step3: Sandblast the glass. Take your sandblaster, and point at your bottle to start blasting away. The longer you blast on the bottle the deeper the sandblasting will go. Step4: See the finished product. Now, that's not so difficult, is it? ►Contact us-LEMATEC CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co vic@lematec.co Website:https://www.lematec-tools.com/ #lematec #sandblasting #sandblaster #application #diy #livestreaming #etchglass #sandblast #livestream

Operation guide-How to use Lematec digital air pressure gauge(DG-B)? This video is about how to use the Lematec digital air pressure gauge. It is a simple and easy guide that will help you understand how to use this device for your needs. Suit for Lematec products as follows item number. *DAR01/02/03B *AI303-R2 *DTI-09B *AS-213D This digital air pressure gauge has an automatic shut-off mechanism that turns off after 60 seconds to conserve the battery. It can measure and regulate air pressure in PSI, KPA, and BAR. High accurate and durable that why famous spray gun companies choose ours. 0:00 Operation guide 0:07 Three setting modes 0:11 Calibration setting 0:32 Auto-off time setting 0:50 Units setting 1:12 Replace battery ►Contact us-LEMATEC CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co vic@lematec.co Website:https://www.lematec-tools.com/ #operation #guide #airpressuregauge #gauge #lematec #airgauge

How to use the Lematec sandblaster gun-AS118-2C?-Tips and tricks for using the Lematec AS118-2C and different applications for the sandblaster gun. *The Gravity Feed and Siphon Feed Sandblaster Gun in One! *New Ceramic Nozzle for more application and durability! *Suit for the workshop, home, garden, DIY, wood, glass, and so on. *Remove Rust, Paint or clean Oil, Dirt, Carbon deposits, and Moss. *Agriculture application by chili pepper water spray to anti-bug. *Supports different media like steel grit, glass beads, walnut shells, silicon carbide, aluminum oxide, and more. *Best hand-held Sandblasting gun made by LEMATEC, Taiwan Tool. More detail: https://www.lematec-tools.com/lematec-gravity-feed-with-siphon-feed-sandblaster-gun-as118-2c Simple step. 1. Unpack the sandblaster gun and check all the parts for damage 2. Connect the air compressor to the sandblaster gun 3. Fill up the sandblasting tank with blasting media (sand, glass beads, etc.) 4. Turn on the compressor and adjust the air pressure to between 90-120 psi 5. Hold the sandblaster gun against the surface you want to blast and pull the trigger to start blasting ►Contact us-LEMATEC CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co vic@lematec.co Website:https://www.lematec-tools.com/ 0:00 Operation guide 01:07 Setting feed method 2:21Before sandblasting 2:58 Application #AS118 #sandblasting #tricks #application #sandblaster #demo #operation #tip #guide #sandblast #removerust

Precautions & Sandblaster gun FAQ. Air compressor, working, applications, and others for Lematec tool. 1. Air compressor 2. What to do if your sandblaster is clogging? Answer 1.10 3. Why does the sandblasting gun have the problem of air leaks? Answer 2. 4. Why is the sandblaster not powerful? Answer 3. 5. Sandblaster types: 6. Why need to refill the hopper often? Answer 4. 7.Sandblasting gun operation 8. Why do media pour out of the sandblaster tip? Answer 5.6. 9. Why can’t the siphon-feed method work? Answer 7.8 10. Why does the sand blaster use too much media (abrasive)? Answer 8.9.10 11. What should you do if the media does not eject or the sandblasting gun does not work? Answer 11, 12, 13 12. Application: 13. Why can’t the sandblaster remove the paint? Answer 8, 14 Answer as follows: 1. It is recommended to install an air control unit in the air compressor. 2. And the installation of an air filter at the air inlet of the sandblaster. The connection between the compressor pipeline and the tools has air leakage. If finding air leakage, please wrap the Teflon tape in the connection. 3. Please confirm the air compressor is above two hp and the operating pressure is above 90 PSI. 4. The sandblaster types depend on the size of objects. For smaller projects, AS118 is suitable because of its flexibility to use. For bigger projects, we recommend AS118-2C. There is a siphon hose for continuous and longer-lasting operations. If you want to check detailed information about the sandblasters, click the link. https://www.lematec-tools.com/sandblasting-gun 4. It is normal for the media to pour out of the tip if a valve is open. 5. Even if the valve is closed, media is left in the chamber. The media will continue blowing out of the tip. This is perfectly normal. 6. When the siphon-fed can't work, please refer to the steps in the video. And ensure the gap (small hole) of the tube isn't covered by the media. 7. Please check if the air source is normal. The operating pressure needs to be higher than 90 PSI. 8. Adjust the abrasive valve to control the amount of media. 9. Reduce the media flow by reducing the air compressor PSI. Please don't go below 90 PSI. 10. The acceptable abrasive size is # 46 to # 220. The abrasive particles are too large, which will cause blockage. 11. Check if the valve of adjusting the media opens. 12. Confirm whether the air source is normal. If the pressure is over 150 PSI, the sandblaster won’t work. 13. Please confirm to use of the above two-HP air compressor. 14. Use a harder abrasive. For example, it would be steel grit or aluminum oxide. About how to select the media, please refer to the link. https://www.lematec-tools.com/application-correct-sand-media-guide-sandblasting ►Contact us-LEMATEC CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co vic@lematec.co Website:https://www.lematec-tools.com/ 0:00 If sandblaster doesn't work 0:55 If your sandblaster is clogging 1:23 If sandblaster uses too much sand media 1:50 Air Leak 2:04 To ensure sandblasting works 2:36 AS118 2:43 AS118-2 2:51 Glass sandblasting 3:06 If a suction function doesn't work #AS118 #sandblasting #questions #application #sandblaster #top #faq

Lematec air blow and vacuum gun kits #shorts #toolsreview #application #easy #DIY #wokshop #lematec

How To refurbish Equipment Using A Sandblaster? The Easy Way by Lematec sandblasting gun to do it #shortvideo #shorts

What You Should Prepare Before Sandblasting? For AS118 Series Sandblaster Useful Tips & Troubleshooting. If you're getting ready to sandblast, there are a few things you should do first to prepare. This will help ensure that the job goes as smoothly and efficiently as possible. By taking care of these preparation tasks, you'll save yourself time and hassle later on. So what do you need to do before starting? Sandblasting is a process that can be used to clean, etch, or remove surface material from objects. It uses a jet of sand particles to perform this work. In order to get the best results from sandblasting, there are some things you should do beforehand. In this video, we will take a look at what you should prepare before sandblasting so that the process goes as smoothly as possible. *Air compressor, https://www.lematec-tools.com/suitable-air-compressor *Quick fitting or fitting *Sand media selection. -How to choose sand/media for your project? 1.https://www.lematec-tools.com/application-correct-sand-media-guide-sandblasting 2.https://www.youtube.com/watch?v=KMAWfEpGC3w *Safety equipment Get the tool now: https://shorturl.at/guwXY ►Contact us-LEMATEC CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co vic@lematec.co Website:https://www.lematec-tools.com/ 0:00 Air compressor selection 0:17 Quick connector 0:42 Sand media selection 1:08 Safety equipment suggestion 1:21 Build-in regulator function 1:43 QC testing #lematec #sandblaster #sandblasting #sodablasting #tool #abrasive #rust #guide #preparation #sandmedia #aircompressor #airtools #DIY

Lematec sandblaster dynamic adjustment valve operation #shortvideo #lematec #sandblasting

Lematec sandblaster dynamic adjustment valve operation #shortvideo #lematec #sandblasting

- Lematec: The Name You Can Trust in Digital Tire Pressure Gauges -The Lematec Heavy Duty Precision Digital Tire Inflator with Pressure Gauge is a great tool to have in your car. In this video, we'll show you how to use it and some of its features. -Features (1) Air pressure inflation (Fully depressed) (2) Air pressure release (Depress half) (3) Anti-smashing (4) One-hand control (5) Made in Taiwan More detail: https://www.lematec-tools.com/digital-tire-inflator Features *Application for car, motorcycle, bike, truck and so on. *Brass made chuck, more durable. *One-hand operation. *Heavy-duty made. *Auto-on/off and on function. Specifications *Model Number: DTI-13G *Material: ZINC & TPR *Weight:0.65kgs *Operating Pressure:90 PSI *Measures pressure range:0-250PSI , 0-17 Bar , 0-17 kg/cm2 , 0-1700 Kpa *Battery:1.5V*2 (#4 battery) *Air Flow at 100 PSI:14CFM *Air inlet:1/4" *Hose length:43 cm *LCD back-light:Yes #lematec #tiregauge #tire #tireshop #tireinflator #digitaltireinflator #tirerepair #Taiwan #toolsreview #airtools #autoshop #workshop #carrepair

Looking for a powerful air ratchet wrench? Here is the Lematec 1/2" 3/8" Heavy Duty Air Ratchet Wrench. This bad boy can deliver up to 150 ft-lbs torque and it's perfect for auto mechanics, home improvement projects, or any other job that requires a lot of power. *Features (1) Three-gear planet structure. (2) Rear swivel exhaust. (3) Composite housing for lightweight. (4) Sleeve with heat treatment. (5) Double ratchet pawls increase durability and tool life. (6) 360-degree adjustable exhaust directs air away from the user. (7) Enlarged forward and reverse switch with comfortable rubber grip. *LE-R2150: https://www.lematec-tools.com/1-2-3-8-air-ratchet-pneumatic-spanners-impact-repair-tool-le-r2150 *LE-R2550: https://www.lematec-tools.com/1-2-3-8-air-ratchet-wrench-pneumatic-reaction-less-mechanism-spanners-auto-repair-tool-le-r2550 The air ratchet wrench is the most efficient tool for your auto repair. It's perfect for loosening and tightening bolts, nuts, and screws. This video will show you how it works! The 1/2" 3/8" Air ratchet wrench, auto repair tools by Lematec. Amazing features that make this tool one of the most powerful in its class. #lematec #airtool #review #ratchet #ratchetwrench #tools

-How to use the Lematec Air Die Grinder Straight Type Speed Adjustable #shorts Function 1. Perfect for burrs and mounted points 2. Straight universal 400W die grinder 3. Requires only 1 wrench instead of 2 during attachment changes 4. High torque motor 5. Ergonomic and safe handle 6. Compact and lightweight 7. Low vibration in operation 8. Special muffler reduces noise to 83dB #airtools #lematec #review #grinder

How to wash the cars with Lematec air foam gun kit? Check this #Shorts video (1) Specially Designed Foam Outlet (2) Wide Range And Distance, Dense And Stable Foam (3) Make Cars, Trucks, and Boats Clean More Easily. (4) Clean Workbench, House (5) Be Connected To Any Garden Hose Or With Quick Hose Connector (6) Features both high and low-pressure operations. (7) Made in Taiwan Car Foam Gun Washer, Water Spray, Blower, and Sandblasting Multi-Use Kit. This kit has everything you need for all your car washing needs! #Shorts #carwashing #airfoamgun #lematec #airtools #foamgun #washing #DIY

Why You Need a Heavy Duty Air Filter Like Lematec in Your Shop and Air Tools? Keep Air Clean & Dry. -Don't let the name fool you, this 1/4" air filter is perfect for all sorts of applications! From air tools to spray guns, this filter can handle it all. Watch the video to see how it works and why you need one for your shop. -This filter-Metal Case 1/4" Oil Water Separator with Drain Valve has a maximum operating capacity of 150 PSI but works very efficiently at any pressure setting. It has a standard operating pressure of 90 PSI but it is at its absolute best working condition anywhere from 25- 150 PSI. With LEMATEC AI-303, the air purification process is made easy and convenient with less stress on your compressed air system and operation. This water, oil and dirt filter removes unwanted particles off the air system/tools and with a specialized drain valve and rejects the collected products and clears the air to allow only pure and clean air to pass through towards your air tool. More detail: https://www.lematec-tools.com/1-4-air-filter-ai-303 *Easy draining valve. *Industry strength in-line 1/4" filter. *Instantly separates water and oil *Good for spray paint gun and other air tools. *Operating Pressure:90 PSI. Max to 150 PSI *Model Number: AI-303 *Material: Aluminium *With: Water drain valve *Optimal for: Spray gun and other air tools / Air in-line *Patent: Yes *Made in Taiwan #lematec #airfilter #tools

Make cars, trucks, and boats clean more easily with Lematec air foam gun kits, how does it work? (1) Specially Designed Foam Outlet (2) Wide Range And Distance, Dense And Stable Foam (3) Make Cars, Trucks, and Boats Clean More Easily. (4) Clean Workbench, House (5) Be Connected To Any Garden Hose Or With Quick Hose Connector (6) Features both high and low-pressure operations. (7) Made in Taiwan Car Foam Gun Washer, Water Spray, Blower, and Sandblasting Multi-Use Kit. This kit has everything you need for all your car washing needs! #Shorts #carwashing #airfoamgun #lematec #airtools #foamgun #washing #DIY

#shorts Lematec air vacuum with blow function kit, application, short video

Lematec Pneumatic Cleaner Kit Dual Function Air Blow Gun with Suction Vacuum, how does it work? https://www.lematec-tools.com/air-blow-and-vacuum-cleaner-gun-tool-kits-as-119 When it comes to vacuums and blowers, you have to look for the one that is durable and can be used in any industry. The Lematec Air Suction Blow Gun and Vacuum Kit are intended to be an all-around air blower with a vacuum. Made out of hard-wearing materials, it is designed for longer and more economical use. The gun is tough lightweight aluminum that can endure impacts from drops and bumps, making it ideal for any workshop and industrial environment. All attachments are heavy-duty with a smooth tip finish to avoid scratches on the surfaces being cleaned. With a compact design, it can operate at a normal range of 100 PSI and up to 150 PSI max. There is a clear difference found before and after using an air blow gun that is the amount of dust and dirt. The vacuum and blow cleaner is light and easy to use with one hand. It could change between blowing and vacuum easily. The blow gun kit has one shop brush, one flat tube, one tiny tube and two extension tubes and a dust bag. The air vacuum and blow gun could be used for house, car, and industrial cleaning. Using Lematec vacuum cleaner with different size of tubes could help you to clean those stubborn areas, for example, And the extension tubes could let you clean the area that you cannot reach, such as vents and high ceiling fixtures. Air duster could blow or suck stubborn debris, dust, water and more of all kinds of materials. It could also suck anything with suction of over 5 pounds. All made in Taiwan, air tools manufacturer/supplier. 0:00 Vacuum and blow function 0:23 quick change suction to blow 0:32 Tools review 0:46 Applications ►Contact us-LEMATEC CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co, vic@lematec.co Website:https://www.lematec-tools.com/

Lematec air water separator filter for air tools and system, easy to install and trap extra water. AI303, 1/4" Air Oil Water Separator Filter *https://www.lematec-tools.com/1-4-air-filter-ai-303 *Works in any position. *Easy draining valve. *Industry strength in-line 1/4" filter. *Instantly separates water and oil *Good for spray paint guns and other air tools and machines. *Press the release valve to eject all the waste that was trapped inside. *Aluminium made of the case with brass air inlet and outlet. This filter has a maximum operating capacity of 150 PSI but works very efficiently at any pressure setting. It has a standard operating pressure of 90 PSI but it is at absolute best working condition anywhere from 25- 150 PSI. With LEMATEC AI-303, the air purification process is made easy and convenient with less stress on your compressed air system and operation. This water, oil and dirt filter removes unwanted particles off the air system/tools and with a specialized drain valve and rejects the collected by products and clears the air to allow only pure and clean air to pass through towards your air tool. ZN312, 1/4" Air Oil Water Separator Filter *https://www.lematec-tools.com/1-4-air-filter-zn-312 *Optimal for spray guns and other air tools *Traps water vapor to maximize air tool performance and extend tool life. *Removes water, dirt, dust and oil from the air system. *Eliminates water buildup in air line. *It can be easily installed between air tool and line. 0:00 How to Remove water from tools 0:36 Air filter test ►Contact us-LEMATEC CO., LTD. Head Office： No., 246-1, Chang Ma Road, Chang Hua, Taiwan, R.O.C TEL：+886-4-762 0038 E-Mail：sales@lematec.co, vic@lematec.co Website:https://www.lematec-tools.com/ #lematec #airfilter #seperator #trap #airtools #spraygun #paintgun #Taiwan #airsystem #pneumatic

Lematec sandblaster gun to remove rust fast and simply. You should need one. Sandblasting guns also can remove paint, oil, dirt...etc from any surface. Lematec brand handheld sandblaster gun is the best one that has a powerful spray design and supports max pressure to 150 PSI. #lematec #sandblasting #sandblaster #removerust #shorts #video