HiLineprecisionReloading

This video is a little older and I will be making a new video soon as containers and labels have changed. Used together this is the ultimate pair for precision reloading brass! Check us out on Amazon for the best price https://www.amazon.com/s?i=merchant-items&me=AJPCPNTLWYLLN We are also on Ebay https://www.ebay.com/str/hilineprecision

Check us out on Amazon for the best price https://www.amazon.com/s?i=merchant-items&me=AJPCPNTLWYLLN We are also on Ebay https://www.ebay.com/str/hilineprecision This is an older video that shows the original formulation. The new formula doesn't separate at room temperature and is a blend of several oils to make a great solution to quickly lube many cases. Spray in a bin or plastic bag start with 4-5 sprays per 50 pieces while mixing the brass around to spread the spray evenly over all cases. Allow several minutes for the 99% isopropyl Alcohol to evaporate, This will leave behind a layer of lubrication. Try a case and if needed add more spray. This really depends on the thickness and size of the brass. Whats most important is to not over do it as you can get your cases hydraulically stuck in the die if they are over lubed. The Lube uses 50% Peg 75 Lanolin and this makes wet tumbling a breeze. Does no foul primers or powder when used properly.

So far my S15 mags have ran good. I had a couple light primer strikes, this ammo has hard primers. However the mags have worked every time. I know for some people they have had issues. If you've had issues do you have a Glock 43 or a 48?

By far my favorite 3d printed project yet. The Mac N Cheese consists of 3 parts that dove tail and bolt together. If you melt the front of break the recoil area you can simple print the part and not scrap the entire lower. The 2 failures to feed on the first round where my fault, I loaded 34 rounds into a 33 round mag, this caused the round to tip straight up. I also needed to tighten the lower bolts on the optic mount clamp first. Want to support the channel? Buy some reloading case lube! https://www.amazon.com/s?i=merchant-items&me=AJPCPNTLWYLLN https://www.ebay.com/str/hilineprecision

I slightly modified the design, adding a double rib and increasing the buffer tower area to increase the rigidness of the lower. Printed with 95a TPU. Want to support the channel? Buy some reloading case lube! https://www.amazon.com/s?i=merchant-items&me=AJPCPNTLWYLLN https://www.ebay.com/str/hilineprecision