Herihandoko

in some cases a component will be very problematic if we don't pay attention to the details of its function or critical installation, and in this video I show one of those things. I hope this helps😘💪🤗

if you found any abnormality about engine and make trouble engine Overheat .. check do this first

fast and simple tutorial for Jack cabin at HM400 If you found any problem for automatic system tilt cabin

there is found problem at pc850 if attachment boom move up it always make hose swing priority is broken . how it can happen ??? see all at video ☺️

error DHPFKB caused Signal voltage from rear pump pressure sensor increased to 4.5 V or above. Action of controller : - Fixes travel speed to Lo. - Continues controls, assuming pressure to be constant {350 kg/cm2}. - Even if cause of failure disappears, machine does not become normal starting switch is turned to OFF position. Problem on machine - Rear pump pressure cannot be monitored. -Travel and work equipment speeds are insufficient. Related information - As T-adapter for pump controller connector is "socket-type box", operating voltage cannot be measured at pump controller connector. - Input voltage from rear pump pressure sensor can be checked by using monitoring function. (Code: 01113 Rear pump pressure sensor voltage) -Method of reproducing failure code: Turn starting switch to ON position or start engine.

we founded abnormality problem at attachment boom , operator can't operation of boom

tutorial for Adjustment Accumulator at HM400

if you found planetary gearbox Scania broken , please You check abnormality at netral switch . at my experience there is found the switch intermitten disconnect . so that make some problem like this

this video i Will share about fuel line and fuel system at HM400-2 .. from fuel tank to injector i Will explain about function and structure from the related componen fuel system