Donmarjon

In This video we will Reviewing the Invacom QPH031 Ku circular and linear LNB on 53 west.

Testing out a Monoblock KU LNB on my 86 eliptical Ku band Dish. Let’s see what results we get.

Testing out a Monoblock KU LNB on my 86 circular Ku band Dish. Let’s see what results we get.

Reviewing the GT Media V9 Prime FTA satellite receiver.

Installing a surge suppressor on the FTA satellite system. May not prevent lightning strikes but should protect it in the event of a close by lightning strike.

GT Media V8 UHD Unboxing, Review and Comparison to the Amiko Mini H265

In this video we will review the IPTV channels of the GT Media FTA receiver. I’ll also show how to do a multi satellite scan.

In this video we will go over the IPTV channels on this Koqit V5H receiver. We will also touch base on some receiver settings.

Part two of my dish farm revamp project, swapping out Ku LNB's

Removing the HH motor setting up the 90 CM for 67 west swapping out double LNB’s to quad LNB’s

Here is my Buyers Guide for electronics, Outdoor TV antenna, and Satellite equipment. This is my opinion with 30 years working in the electronic high tech industry.

Hao dose a satellite work and what does it mean when I get a fail on the transponder during a blind scan.

Comparing two $35 FTA satellite receivers. We will compare the Koqit V5H and the GT Media V9 Prime receivers. Which is the best buy for the same amount of money. Here is my personal opinion.

Tag along as we correct the issue of the receiver displaying the wrong polarity for a FTA satellite channel.

Here is a list of my Ku go to satellite locations.

Tag along as wel troubleshoot the loss of signal from out dish pointed at 99.2 west c band.

Tag along as we troubleshhot a bad Ku LNB on My FTA satellite network.

Part 3 of my dish farm revamp project. We will go over assigning port number for dishes in the episode.

Reviewing the Diseqc 10 By 1 FTA satellite switch.

Adjusting the aspect ratio on my Amiko Mini H265 Receiver.

What to do when your FTA receiver displayes the wrong frequancy for a station.

Tag along and I'll show how I tune in one of the Five LNB's on my 5 LNB elipitical Dish

Tag along and I'll show how I tuned in my Prime focuse C band dish.

I'll show how I poured a concreate base for my C Band dish.

Mounting the C band dish to the concreate base.