Cwlongshot

My version if a heavy hard cast 327 load.

Completion of the bedding of my 6mm Remington build

This video will be loading some 68 and 80 green match bullets. All with CFE223 powder with an EYE toward accuracy. I started with once fired, federal cases, all trimmed, chamfered, deburred, flash holes cleaned & deburred & crimps removed.

I've been bothered by the little bit of deflection in these turrupt presses for decades. From my very first Spartan T to my turret, to my turret II, to my MAG T, to this American eight reloading press. Each one except for the Spartan T has been sold off largely because of this flex or deflection in the turret head. This one has probably been one of the best in this regard, it's pretty minimal but it's there and all although I don't consider myself an OCD person it's always bothered me. I thought about shipping it actually did shim in the back and was able to remove all of the deflection. But it was a hassle you had to put the shim in every time any time you turn the turn you had to pull it back out and put it back in it was a Band-Aid at best. And I frankly almost stopped using the press because of it . In speaking with a friend of mine he was going to make me up some shims and I'm sure that would've worked but in thinking last night I realize that I could do exactly what I'm gonna show you here in this video. So I hope this helps someone it was pretty easy to do and I'm extremely satisfied with the results.

Classic favorite. Born about 1937 and introduced by Winchester in the Model 65 lever rifle. Great short range varminter! Shares cases with the 25 & 32/20 cartridges.

Frankfort Arsenal UNIVERSAL seater die. Some resemblance to a MATCH seater die & produces a good result but not the same.

Using a LEE 4hole Turret. Its almost completely the same for any press. But this one seems real popular.

This was a 6mm Rem rifle set. But its set up will carry for most all rifle die setups you might need to do. There are different things for a pistol set. If ya want that I can do that video as well.

A RCBS 44-250 KT A Lyman 427098 AV The "44/40" bullet drops @ 4275/.428. After coating it is .432.

The conclusion of my repairs. Fixing sub standard parts and design.

PT II and finish up on how I powder coat bullets.

I cast the LEE 358-200 with its new plate!! Plus some old favorites!

I started with just a regular mold clean up/conditioning. BUT NOOO!! Ol no.2 didnt have there eyeballs adjusted when they OK'd this mold!!!! Grab a drink and have a sit this is a longer video...