Let's Figure This Out

Wood Lathe Selection Process from a Beginner The new lathe and accessories have arrived. It's now time to open all the boxes and set it up. Here is the list of additional equipment I purchased: Delta 46-460 Lathe - $660 Chuck - $150 Drill Chuck - $33 Legs - $186 Tools - $175 Face Shield - $29 Center Finder - $7 CA Glue - $11 Forstner Bit Set - $60 Forstner Bit Extension - $15 Total - $1,326

I've been interested in turning wood for a very long time. Life has finally slowed down enough so I can give it a try. Wood Lathe Selection Process by a Beginner This first video of a 4-part series will be about the selection process and how I decided on which lathe to buy. Here is a list of the lathes I considered: Laguna - MLAREVO 1836 - $2,800 Grizzley - G0462-16" x 46" - $1,142 Delta - 46-460 - $660 Jet - JWL-1440VSK - $1,700 Jet - JET JWL-1221VS - $850 Wen - 3424 - $320 Rikon - 70-220VSR - $595 Here is the list of additional equipment I purchased: Lathe - $660 Chuck - $150 Drill Chuck - $33 Legs - $186 Tools - $175 Face Shield - $29 Center Finder - $7 CA Glue - $11 Forstner Bit Set - $60 Forstner Bit Extension - $15 Total - $1,326

I need to replace the exterior kitchen vent on my 5th wheel which is old, yellow and cracked. I've never done it before, so let's figure it out. Here is the butyl tape I used: Dicor BT-1834-1 1/8" x 3/4" x 30' Butyl Seal Tape

Cold weather coming in and I need to winterize the fifth wheel. I've winterized other RV's but not this one, so Let's figure this out.

This winter I decided to pull most of the batteries from my vehicles and put together a battery charging station

While washing the van, the glass on the driver's side mirror blew off. So let's figure out how to replace it.

I don't use my ATV in the winter so to minimize start up issues in the spring I winterize it.