Laser Cutting Version 1 of the Bedside Table
It was well overdue for me to make a simple bedside table no matter what type of wood I was using as I have been using a cardboard box for the past 6 months. So here it is version 1 of the bedside table. It’s made out of layed OSB with a thin little varnish. I’m planning on making a version 2 in a little while but for now i’m really happy with the out some. It fits its purpose nicely and beats the old cardboard box I had hands down.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
3
views
My First Laser Cut Rope Chair / How to Make a Laser Cut Chair
Well, here it is my first laser cut, rope chair. It’s great to have fun with new materials as I have never worked with cord and cloth before. I did have my doubts about the OBS but it pulled through yet again. On top of all that this whole build is held solely by tension and friction, not a screw, nail or drop of glue in sight. It turned out great for my first attempt. I definitely have a few improvements to make but in the future, the main difference I think will be the type of wood used.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
4
views
Laser Cutting an Under Sink Storage Unit
This week we got to make the first bit of furniture for the flat. It turned out great! It was a little tight but at the end, it all fitted in nicely and does not move one bit. I really do think I need to create that magnet system to hide it all away as it does make the bathroom look a little busy.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
2
views
Laser Cutting an Epic Kitchen Draw Organizer
I had to get the kitchen in order so I made this draw storage. It came out looking much better than I expected. It even has a chopstick section! I know it’s a short video but this is due to a huge project that is in the works currently.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
1
view
Fixing threw 3d printing! My first useful 3d print...
So first truly 1000% useful 3d print that I would not of been able to of make, pretty much any other way… I have to say when things like this come up and I have my 3d printer at my side… I’m almost waiting for the next little thing that needs a fixing…
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
2
views
How to Make Laser Cut Wooden Playing Cards
So here’s how to make so super fancy laser cut playing cards. This was definitely an interesting project as I had to not only learn a new material and a way of etching it but I needed to learn how to use the vision control system to make these double-sided cards. I’m really happy with the outcome! I could even see really wanting to get a hold of these if I saw them elsewhere. Next on the list is to build a lovely box for these.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
2
views
Peg board peg
Now that the first pegboard is cut and up it's time to make the pegs that are going to be used with it. As this is not your average pegboard I'm having to make custom pegs to fit my needs. This short video shows you how I went about designing my pegboard peg system.
Link to Make Anything video: http://bit.ly/2mYvCbt
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/Makertales
7
views
How to make Custom Laser Cut Peg Board.
Super happy this week to get to start to improve the workshop!! I can't some 6mm MDF which I'm turning into custom-built laser cut peg board! It was defiantly an interesting build that had a few little twist's and turns but I know this is only the tip of the iceberg of whats to come with the whole workshop.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
3
views
Laser Cut Portable Phone Stand
This week i've kept things pretty simple but it did have it's own unique engineering challenges that I did not expect. So now I have a phone stand with me at all times.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
3
views
Reverse Engineering a Laser cut puzzle box part 2
Original box by Benno de Grote
His Video: https://youtu.be/rfnDDqQFrzM
This week I got to finish reverse engineering the laser cut puzzle box in the middle for the Christmas festive period. This is by no means the final outcome as I need to refine the design to work great but before I get to do a second attempt I'm going to need a better material to make these out of.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
2
views
How to / Reverse Engineering a Laser cut puzzle box from : " home made laser cut puzzle box "
Original box by Benno de grote
His Video: https://youtu.be/rfnDDqQFrzM
So this week it's the beginning of a project I did not expect me to take more than a day... Benno made this lovely wooden laser cut puzzle box... However he never put the plans up and I really like it, SOO in the spirit of, if you want it make it.. I'm learning how to reverse engineer a laser cut puzzle box! ( Spoiler ) It's F***ing Hard...
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
4
views
New Tubing and Long Engraving
So as I said in the video I decided that I said I would share it all. It's been a productive week... but I feel like there was nothing truly creative about it. But here is what i've been up to.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
3
views
Laser cutting a 3 METER! Dinning table...
Well, I thought this week we would use betty for she is intended for... A cut the biggest table I can fit on her laser cutting bed. In total just over 3010mm A PRETTY BIG! table. I also did a fancy de focused cut / etch in the centre of the table to give it some class... I'm sorry that I was not able to show it in situ but unfortunately the varnish is still curing...
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
2
views
Making Height Adjustable Desktop Screen Stand
In this little project, I show the whole processes of a laser cut height adjustable desktop screen/monitor stand form Idea, design and creation. It's been a fun project to do as I can see my laser design skills improving with each new project.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
2
views
Making A Cardboard Table / Laser Cutter
Here we have it the first real project made using betty... I have never attempted anything like this before... So it was quite a journey in itself... As you will or have seen in the video I sort of started my first mini fire using the laser cutter AKA Betty...
At the end, all seems to have worked out even tho I had pretty much every odd stacked up against me at one point. Anyway, let the quest continues.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
4
views
Laser Cutter Up FINALLY up and Running!!!
BETTY IS ALIVE!!!!
We are finally at the point where I can really start to make stuff!!!
The Trotec SP3000 200watt Laser cutter is up and running! This video was made on the day that it's up and running so I only have examples of test's but in the next coming weeks, i'm sure things are going to progress FAST now!
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
2
views
Putting Together Workbench V 1.0
This week I keep it simple as things are moving slowly but surely... I decided to go ahead and build the simplest workbench design that I could think of... All of which is made out of the shipping creates of the laser.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
10
views
Say hi to Betty, The Laser is INSTALLED!
Finally the laser is here! After a rather long wait our SP3000 aka Betty has arrived and is installed... It was great seeing her come together and to actually see how HUGE she is too is unreal! I think this is one of the biggest laser cutters i'm going to ever see to be honest.. Anyway next up it's design and cutting time...
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
2
views
4 Tonne Laser Cutter Delivery
That's right... Today we had a 4 tonne laser delivered! So in a nut shell the beast is here! I have never seen boxes this size in my life. Plus I've never had a delivery that last's over 5 hours... ( Of course this includes lunch ). But it's here and I can't wait to get going... HOWEVER, now comes a WEEK long installation!
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
3
views
I Pimped My Balcony...!?!?
So for most of this week, I have spent it renovating the office balcony. I thought we were all going to need somewhere nice to relax and to get away from the noise of the workshop once it's up and running. So her it is... these will be more progress in the future but for now, this is a good start I think.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
2
views
My First VR Sculpture to 3D Print with Gravity Sketch
So here it is my first try at sculpting and 3D printing a model that has been made in VR. More specifically on my HTC Vive on Gravity Sketch. I learnt a lot in this process and I hope this will help to serve you too or at least fule your curiosity.
Useful Links:
Make Printable: https://makeprintable.com/ref?referralCode=r1geKll3-&refSource=copy
Make Anything: https://www.youtube.com/watch?v=-qyZWT1fL7A&t=1s
Leave a comment to request wanting the model as it's a little large for My Mini Factory.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
3
views
I Broke My Door & Me BUT I'm At C!Print Madrid
So I would call this one of my first downs... Literally! I broke my door frame and almost my knees in the process of getting healthy... However, on the flip side I have been at C!Print Madrid for 3 days getting to see everything and talk to loads of interesting printing, lasering makers.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
Patreon: https://www.patreon.com/MakerTales
3
views
A short update and a little 3d print fail.
A very short video as I missed monday.
In a nutshell.... I've been ill but I'm back now and I'm actually going to make my first little fun project! I also had a go at printing out one of our logos but as you will see it's come out a little umm different than intended...
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
2
views
Warehouse, Kitchen, Office, 3D Printer?!?!....
So there has been some progress!
You'll see that now we are all in place and things are starting to move along. With a bit of luck in the next few weeks or so i'll be drawing up some storage to create and begin to built to workshop.
You can also find me at:
Facebook: https://www.facebook.com/MakerTales
Instagram: https://www.instagram.com/makertales/
Twitter: https://twitter.com/themakertales
It's coming all together...
Well today we have a super sort update were you see the warehouse office taking shape and my flat quite bare but all set up.
3
views