Folding Karambit 3D Printed
I was inspired by Koss video:
https://www.youtube.com/watch?v=JAw94JMxOrc
Music: "Harp & Hammered Dulcimer" by Wintergatan Build Track.
Links:
https://www.thingiverse.com/thing:4762176
https://www.myminifactory.com/object/3d-print-folding-karambit-154211
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #FoldingKarambit
4
views
How much does 3D Printing cost? All my 2020 expenses.
In 2020 I spent 677,06 dollars on 3D Printing.
Let's check on what exactly and then compare to it to 2019.
I will also talk about my earnings and plans for the future.
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
Check Trianglelab on Aliexpress:
http://s.click.aliexpress.com/e/ogUL48V2 - affiliate link, you pay nothing extra, I get small change, I am not sponsored by them, they just have great price/value ratio for 3D printer parts and a free shipping.
You can support me in various ways:
- smash the like button and subscribe to my channel:
https://bit.ly/medyk3Dsub - that really helps me, thanks!
- buy me a coffee (filament in fact):
https://www.buymeacoffee.com/TmjEfCc
For more info about me you can visit:
Thingiverse: https://bit.ly/medyk3Dthingiverse
MyMiniFactory: http://bit.ly/medyk3Dmmf
My blog: http://medyk3d.com
Odysee: https://odysee.com/$/invite/@medyk3D:e
Lbry: https://lbry.tv/$/invite/@medyk3D:e
Twitter: https://twitter.com/DMedyk3/
Instagram: https://www.instagram.com/medyk3d/
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting
3D Printed DIY Button Box
This time I've created a custom 3D Printed Button Box. It costs about $42 which is about half the normal price.
STLs:
https://medyk3d.com/wp-content/uploads/2021/02/ButtonBox-medyk3D.zip
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
Chapters:
00:00 Intro
00:15 Why? What? How much?
02:08 The box design
02:51 Box features
03:35 Pre printing tests
06:27 Printing the box
06:54 Assembly 1 Remove the brim
07:08 Assembly 2 Remove the supports
07:27 Assembly 3 Remove the bridges
07:44 Assembly 4 Glue the top plate
08:07 Assembly 5 Soldering the buttons
08:37 Wiring
09:13 Coding the Arduino
09:39 Assembly 6 Mount the bottom plate
10:51 Assembly 7 Threaded inserts
11:30 Testing time
11:50 Test time (let's play Euro Truck Simulator 2)
17:17 Watch my other videos!
#medyk3D #3DPrinting #ButtonBox
Wexagon (hexagon shelves) remix by medyk3D (display your Matchbox collection with style)
Today I made a remix of Wexagon (hexagon shelves) by Wekster. This is a really cool design. I changed it so I can use it to display Matchbox cars.
My remix:
https://www.myminifactory.com/object/3d-print-wexagon-hexagon-shelves-remix-for-displaying-matchbox-cars-146009
Vedran Marjanović Wekster original file:
https://www.myminifactory.com/object/3d-print-wexagon-hexagon-shelves-101570
https://www.patreon.com/wekster
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
0:00 Intro
0:43 Prusa Slicer setup
1:16 Timelapse
1:26 Mounting it to the wall
2:11 Outro
#medyk3D #3DPrinting #wexagon
4
views
250 Subs Giveaway - win $25
Thank you! We reached another cool achievement – 250 subs on my YouTube channel.
Giveaway link:
https://kingsumo.com/g/dcrgj7/medyk3d-250-subs-on-youtube-giveaway-win-25
I will transfer $25 to one lucky winner (the payment method is to be agreed upon).
GIVEAWAY ENDS: DECEMBER 20, 2020 08:53 PM EST
I need your email so I can contact the winner. I won't send you any spam mails neither should kingsumo.
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #giveaway
Skyrim Swamp Dragon glowing trophy
Dragons and LEDs for the win!
While testing Tarfuse Mystic Green PLA I printed this Swamp Dragon trophy.
It was printed with no infill and one of the mounting holes goes all the way to the dragons throat so I came up with an idea to add LEDs to make it glow.
To make it more power saving I also added simple electronic circuit that turns on the LEDs only when it is dark.
More about electronics on my blog:
https://medyk3d.com/2020/11/how-to-turn-on-led-when-it-is-dark
Skyrim Swamp Dragon wall Trophy by Raffo San:
https://www.myminifactory.com/object/3d-print-skyrim-swamp-dragon-wall-trophy-72903
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
00:00 Intro
00:25 Odysee
00:47 How it started
01:05 Components
02:17 Prototyping the electronic circuit
04:42 Putting everything together
11:03 Outro
#medyk3D #3DPrinting #swampDragonTrophy
3D Printed Articulated Bumblebee G1 Transformers
What an amazing model! I had to print it and it looks awesome.
Links to Toymakr3d files:
https://www.thingiverse.com/thing:3734165
https://www.toymakr3d.com/
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
00:00 Intro
00:47 3D Printing
01:25 Assembly
05:10 Loose joints
06:07 Outro
#medyk3D #3DPrinting #Bumblebee
3D Printed Gears are too weak - manual paper shredder failed repair
3D Printing cannot solve all our problems. But it's always worth to give it a go and learn from it.
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
00:00 Intro
00:28 Opening the shredder
01:03 Gear in Fusion 360
01:22 PETG failed test
01:49 ABS failed test
02:46 Nylon failed test
04:10 Bitterness and Disappointment
04:28 Outro
#medyk3D #3DPrinting #3DPrintedGear
8
views
Can DCM improve 3D prints quality? Kinda
Subscribe now or your layer lines will always be visible.
For now the best option is to use a brush with soft bristles and apply thin layer of DCM.
It works for PLA and PETG.
It hides the layer lines, scratches and sanding marks.
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #DCM
Printing with Tarfuse filament (ABS, PLA, PA)
There is a new filament brand in Poland. And it's really nice.
I tested ABS, PA and PLA and you can too by visiting Grupa Azoty Tarfuse shop website:
https://sklep.grupaazoty.com/
Models:
Twisted Heart Vase by Gyrobot
https://thingiverse.com/thing:42570
Red Skull by @jpsmith00
https://myminifactory.com/object/3d-print-red-skull-109224
Megaman by zierzo
https://thingiverse.com/thing:3700687
Orc Warrior by Rober Rollin
https://myminifactory.com/object/3d-print-orc-warrior-support-free-bust-figure-112026
Skyrim Swamp Dragon by RaffoSan
https://myminifactory.com/object/3d-print-skyrim-swamp-dragon-wall-trophy-72903
Messi bust by kali_3d.designs
https://instagram.com/kali_3d.designs/
Cali Cat by Dezign
https://thingiverse.com/thing:1545913
Double Threaded Screw by medyk3d
https://thingiverse.com/thing:4582261
00:00 Intro
00:16 History
00:43 ABS
02:41 PA (Nylon)
04:02 Tarfuse online shop
04:22 PLA
05:44 Summary
06:14 Outro
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
Graphics used in this video:
Poland stronk: https://www.wykop.pl/cdn/c3201142/comment_spIvXj3TfVi9orG4EYFsp3YNxtxY901j,w400.jpg
Lanister always pay his debts: https://www.youtube.com/watch?v=VUg2Q4A13Ss
#medyk3D #3DPrinting #Tarfuse
Anet A6 metal frame for $21 - part 4 - getting the frame ready for Anet A6 Prusified MK2
Resolving problems as they occur is always an option.
Exactly as subscribing to my channel! Do it now!
Maybe in the next episode Anet A6 Prusified MK2 can start printing, who knows?
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
00:00 Intro
00:25 Squaring the frame
02:41 Measuring the rods
09:50 Cutting the rods
11:22 Preparing for painting
12:25 Painting
14:08 Reassambling painted frame
19:01 Y-axis mount
23:29 Clean and greas rods and bearings
29:56 Outro
#medyk3D #3DPrinting #AnetA6PrusifiedMk2
Custom 3D printed gutter pipes connector
Why I love 3D printing?
Because in 2 hours you can create a custom gutter pipes connctor without leaving your home.
As easy as subscribing to my channel.
Do it now and don't miss my next videos, thanks!
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
Music by:
Andrewkn
Pad, Ambient
freesound.org/people/Andrewkn/sounds/530376/
CC BY 3.0 license
#medyk3D #3DPrinting #GutterPipesConnector
3D Printed Revolver - Single Action Prop Gun
Download link (filess are created by Steiner 3D @DeSteiner)
https://www.printables.com/pl/model/276918-prop-gun-revolver-single-action
Download, print, like the model and enjoy.
BoM:
There is a pdf under the thing files (revolver_exploded_2019-01-28.pdf):
https://cdn.thingiverse.com/assets/5a/d2/2d/d4/1c/revolver_exploded_2019-01-28.pdf
Just in case I reuploaded the pdf to my blog and added the list:
https://medyk3d.com/2020/09/3d-printed-revolver-single-action-prop-gun
Google drive link:
https://drive.google.com/file/d/1jgDOOmatyV_9LQQVwydKxun8ZQX1vr4M/view?usp=sharing
1x M5x50 03 ISO 4762
1x Spring 4x18 ( 0,4) 27 from pen ****)
1x ST4,2x18 (non standard length) 26 (ISO 7049) *) **)
4x ST4,2x13 (ST4,2x11 to ST4,2x13) 25 ISO 7049 *)
4x ST4,2x10 (ST4,2x9 to ST4,2x14) 24 ISO 7049 *)
1x ST4,2x7 (non standard lenght) 23 (ISO 7049) *) ***)
1x ST4,2x4,5 (standard length) 22 ISO 7049 *) ***)
1x ST2,9x7,5 (non standard length) 21 (ISO 7049) *) ***)
1x M5x30 20 ISO 4762
*) "Sheet Metal" screw (ST)
Standardized available
lengths: 4,5/6,5/9,5/13/16/
19/22/25/32/39mm
**) flat tip recommended
***) flat tip required
For flat tips, get longer
screws and cut them to
the needed length.
****)outer diameter: max 4mm
wire diameter: ~0,4mm
length: min 18mm
compressed: max 6mm
0:00 Intro
1:14 Timelapses
2:28 Assembly
9:12 Bullets
11:03 Outro
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
music by:
Jamessi
Light Tune ~ No.1
licensed under CC0
freesound.org/people/Jamessi/sounds/410520/
#medyk3D #3DPrinting #3DPrintedRevolver
66
views
Double Threaded Screw
Hi! Today I would like to show you how I made this dual thread screw.
You can use this screw with both left and right threaded M24 nuts.
Pure magic.
0:00 Intro
0:18 Fusion 360 quick theory
0:40 Versions history
2:58 Timelapse
3:33 Double Threaded Screw in action
4:31 Outro
Files:
https://www.thingiverse.com/thing:4582261/
https://www.myminifactory.com/object/3d-print-double-threaded-screw-132414
Inspired by this 9gag post:
https://9gag.com/gag/aWxpxw4
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #DoubleThreadedScrew
Creating MasterSpool from an old filament spool
Another way to upcycle an old filament spool.
Create a MasterSpool out of it.
Original MasterSpool by RichRap:
https://www.thingiverse.com/thing:2769823
My remix:
https://www.thingiverse.com/thing:4573422
0:00 Intro
1:51 3D Printing the parts
4:46 Cutting the old spool
5:42 Assembly
8:00 Inserting the refill spool
8:45 Outro
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #masterSpool
Anet A6 metal frame for $21 - part 3 - cutting the profiles and frame assembly
It's time to upgrade my Prusified Anet A6 even further.
Let's create a metal frame for it, just like the one used in Original Prusa i3 MK3s.
In this episode I cut the profiles to size and started assembling the frame. Lots of sanding.
This project has no sense and it's made for fun mostly. Hope you will enjoy it as much as I do.
So far, except for the tools I've already had, I bought steel for $11 and 3030 profile for 10$.
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
Music is taken from:
https://freesound.org/people/esistnichtsoernst/sounds/465294/
and is under
CC0 1.0 Universal (CC0 1.0) Public Domain Dedication
But I've received copyright claim anyway. I opened the dispute.
Sorry for the commercials you can see due to this issue.
#medyk3D #3DPrinting #AnetA6
Creating timelapses using Yi 4k Camera
Today I present you how I hacked my YI 4K Action Camera so I can use it to create timelapses of my 3D prints.
Links:
https://dashcamtalk.com/forum/threads/yi-4k-z16vxxl-custom-firmware-and-more-update-18-11-07-launch-scripts-at-boot.35439/
https://github.com/psolyca/Yi_4k_ROOTFS/
https://github.com/psolyca/Yi_4k_ROOTFS/wiki/Events-callback
https://help.yitechnology.com/hc/en-us/articles/230048127-How-do-I-update-the-camera-firmware-version-
https://blog.prusaprinters.org/how-to-create-beautiful-3d-print-timelapse-videos_29743/
After layer change gcode for Prusa Slicer:
;AFTER_LAYER_CHANGE
G1 X249 Y200 F{travel_speed*60} ;Move away from the print
G4 S0 ;Wait for move to finish
G4 P1500 ;Wait for 1500ms - taking a photo
;[layer_z]
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #YI4KTimelapses
2
views
3D printed dovetailed magnetic chess box
It took quite a while but finally I made it:
3D printed dovetailed magnetic chess box.
Chess set by Grantisimo:
https://www.thingiverse.com/thing:3038401
https://www.myminifactory.com/object/3d-print-low-poly-magnetic-chess-set-72302
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
5
views
Prusa Enclosure - Detachable magnetic side panels
Next upgrade for my Ikea Lack table enclosure for Prusa 3D Printer.
Now I can easily remove the side panels.
You need 12 pieces of 20x6x2 magnets (same as in Prusa extruder):
https://s.click.aliexpress.com/e/_AAtslR (affiliate link)
Files:
https://www.thingiverse.com/thing:4548027
https://www.prusaprinters.org/pl/prints/37135-prusa-enclosure-detachable-magnetic-side-panels
You need 12 pieces of 20x6x2 magnets (same as in Prusa extruder):
https://s.click.aliexpress.com/e/_AAtslR (affiliate link)
and 12 small wood screws.
If your bridging settings aren't perfect then use supports otherwise inserting magnets can be painful (I had to clean the sockets).
Print six of HolderA and HolderB. Positioning tool included so you can easier attach the holder to the Ikea Lack table.
Be sure to orient the magnets correctly.
First you need to take of your upper table and remove the pieces holding the plexi panels of the bottom corners.
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #prusaEnclosure
12
views
How to reverse engineer and 3D print a replacement part using Fusion 360
My way of recreating tricky parts in Fusion 360.
Tell me if you know a better way to do it.
Need to learn this:
https://www.youtube.com/watch?v=NypRE2aFhh4
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #fusion360
1
view
Prusa Drybox Base
This is a simple base for Prusa Drybox.
Subscribe now! I need subscribers so I can make another giveaway (this time at 250).
I printed a version which should be secured onto a wall, but after few weeks I've changed my mind.
Didn't want to throw away a good drybox so decided to make a base for it.
It has tendency to tip over to the front, but so far there are no issues during printing.
Files:
https://www.thingiverse.com/thing:4520378
https://www.myminifactory.com/object/3d-print-126654
https://www.prusaprinters.org/prints/35973-prusa-drybox-base
Dryboxes link:
https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade_30525/
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #prusaDryboxBase
1
view
3D Printed Small Suitcase
Subscribe, next giveaway at 250 subscribers!
Today I've designed and 3D printed a small suitcase.
I'm really proud how it turned out. You don't need any hardware just your filament. CA glue is required.
Internal dimenssions are 220mm x 140mm x 24mm (about 8.5in x 5.5in x 0.95in)
The final design was printed with Fiberlogy Fibersilk filament, it's awesome and you should give it a try.
Link to the files:
Thingiverse: https://www.thingiverse.com/thing:4508692
MyMiniFactory: https://www.myminifactory.com/object/3d-print-small-suitcase-126123
PrusaPrinters: https://www.prusaprinters.org/prints/35575-small-suitcase
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #3DPrintedSuitcase
100 subs giveaway
Thank you all! Giveaway:
https://kingsumo.com/g/iwjfoi/3d-printed-media-control-knob-medyk3d-100-subs-on-youtube
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting
1
view
3D Printed Media Control Knob
We did it! 100 subscribers and I'm giving away three Media Control Knobs.
To enter click here:
https://kingsumo.com/g/iwjfoi/3d-printed-media-control-knob-medyk3d-100-subs-on-youtube
Original design by Mikolas Zuza:
https://blog.prusaprinters.org/3d-print-an-oversized-media-control-volume-knob-arduino-basics/
How to configure Arduino IDE for Digispark:
https://digistump.com/wiki/digispark/tutorials/connecting
Stuff I've used (affiliates links, you pay nothing extra, I get some change):
Encoder:
http://s.click.aliexpress.com/e/_dSqXwoQ
Digispark - choose the blue one:
http://s.click.aliexpress.com/e/_dYKzAK2
Thingiverse:
https://www.thingiverse.com/thing:4463043
MyMiniFactory:
https://www.myminifactory.com/object/3d-print-media-control-knob-125092
PrusaPrinters:
https://www.prusaprinters.org/prints/34660-media-control-knob
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #3dPrintedMediaControlKnob
5
views
You design I print: Memory Falcon by IdRatherBeMaking
Welcome to the new episode of "You design I print".
The place where I print your designs.
Today I present you:
Memory Falcon by IdRatherBeMaking
https://www.thingiverse.com/thing:4254975
Watch the IdRatherBeMaking video here:
https://www.youtube.com/watch?v=-3mWcHM7JIs
Fillenium Malcon by aaskedall:
https://www.thingiverse.com/thing:919475
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
#medyk3D #3DPrinting #MemoryFalcon