MR2 Australia

It was a bit hot though I got a pretty decent time. I took 14.4 seconds off my best lap from Challenge Bathurst 2017 👍👍👍 The temperature in the cabin got up over 40 degrees! Ouch. My best time was 2:28.318 #mr2 #sw20 #toyota

This takes at least 15 degrees C out of the air intake temperature compared to no water spray. Lower intake temps mean more power! #mr2 #sw20 #toyota

Another PB! Woohoo! #mr2 #sw20 #toyota

1990s - the best era of JDM #mr2 #sw20 #toyota

This was at Wakefield Park, which is near Goulburn in Australia. What a great little track! #mr2 #sw20 #toyota

No. #mr2 #sw20 #toyota

I messed up turns 3 and 4 though still got a PB. It was a very messy lap, though maybe that is the secret to great lap times? Let me know what you think. #mr2 #sw20 #toyota

This was at the Sydney Motorsport Park South circuit, which is called "Amaroo". This is s short and tight track which is incredibly technical. I managed to take 0.6 seconds off of my previous best time. 💪👍🤘 Although the video looks very technical, the car has no driver aids whatsoever. It doesn't even have ABS! #mr2 #sw20 #toyota

This was my fastest lap of the day. #mr2 #sw20 #toyota

https://www.austimeattack.com.au/ Tilton EVO at 10:43 MR2 in-car footage starts at 12:30 Check out what happens at 24:23 I was going to knock off around 0.5s from my PB when the Honda blocked me on the last corner. 😢 #mr2 #sw20 #toyota

This is my first in-car video with telemetry. Pretty cool huh? 😎💪🤘👍 I will make some minor tweaks to it for next time. The IAT was a bit high because I turned the boost up to 28 p.s.i and the cheap Chinese junk water spray pumps died. 😢 #mr2 #sw20 #toyota

Shit happens sometimes...

My greatest pride is that I built this car myself, didn't listen (too much) to the haters, and didn't follow a formula that was set by others. What do you think about homemade weapons?

Official time was 1.03.8516 Not bad for a backyard build!

The old water to air intercooler system is very heavy! 30Kg! Don't forget to like and subscribe. 😎

The title says it all. Let me know if you have any questions, and please don't forget to subscribe to my channel and like this video! #mr2 #sw20 #toyota

It's finished! Now I need to wait for track days to start again.

I'm getting very close to being able to test my new water spray on the track. I'm really hoping that it makes a big difference to my inlet air temperature.

It was a hot day, so no PB 😪

The driver was OK. What do you think went wrong?

18th of January 2020. WRX club track day.

This was my first drive at Phillip Island, and I made a lot of mistakes! This good news is that I progressively got better lap times. Wow what a great circuit! So fast! If you would like to help us build the fastest time attack MR2 in the world, please visit our Patreon page here - https://www.patreon.com/mr2australia

A few of you have asked about my Instagram photos of wind deflectors. This explains it all. Don't forget to like and subscribe! If you would like to help me to build the world's fastest SW20 MR2 time attack car (without a K-swap!), go to my Patreon page and become a patron - https://www.patreon.com/mr2australia Build thread - https://www.mr2australia.com/mr2play/tm.aspx?m=47893 Instagram - https://www.instagram.com/mr2australia/

I didn't take the crank apart because I'm not ready to start the build yet. Keeping the sump on and pistons in will help to stop rust until I am ready. If anyone knows a good way to get the driveshaft out, please let me know! I don't really need to get it out, though it bugs me that I wasn't able to get it out easily. What's the trick to it? If you would like to help us build the fastest time attack MR2 in the world, please visit our Patreon page here - https://www.patreon.com/mr2australia

It's rare to have access to video as good as this. Here's an example of how not to drive a MR2 ;-) If you would like to help us build the fastest time attack MR2 in the world, please visit our Patreon page here - https://www.patreon.com/mr2australia #mr2 #sw20 #toyota #WTAC #WTAC2019