🔥CASTING AN ALUMINUM HANDLE (4K)🔥 #aluminum #casting
Aluminum knife handles
Hello everyone👋🏻.
#metals #aluminum #casting #devilforge #metalcasting #melting #metals #ingots
This week I’ve melted aluminum to make handles for my knife.
I use this knife mainly for stripping copper, cutting cardboard and stuff..
I was bored with the orange plastic so I decided to cast a new one.
I chose aluminum because it looks cool😃.
Maybe next time ill get bored with it, ill make it out of something else.
Brass or nordic gold🤔.
Or I let you decide when the times come😉.
The cast went good, it was a little bit difficult to make the mold with the little holes.
The holes didn’t come out completely, so I drilled them but a little to big.
With the result, not all the pieces would fit back in..
But it works, and it’s safe to use so I don’t complain😉.
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around 1 am ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
11
views
2
comments
MELTING ALUMINUM PIPES/BIG INGOT #devilforge #casting (4K)
Hello everyone 👋🏻
#melting #metalcasting #casting #devilforge #aluminum #metals #scrapping #bigingots
#ingots
This weeks video, I made a nice big ingot out of aluminum.
And a smaller one 😉.
It wasn’t a good day to melt, it was rainy, miserable weather😔.
But I still got the melt I wanted to do.
I didn’t lose to much during the melt, some was still in the crucible.
And some evaporated during the melt.
But that’s ok, got some ingots to add to the stack😉.
The stack is getting along slowly, but!!! don’t be disappointed!
I’m planning a big melt! (So I’m hoping the weather doesn’t ruin it!! I want to reach 300KG this year!!!).
If I do this melt, I’ll need to rearrange the stack, so all the weight isn’t in one spot😏 (hint, hint!).
I tried making a mirror finish, but it doesn’t quite look like one.
I think I need new pieces to polish.
I started sanding it with 80p,200p,600p,1000p,2000p and lastly 3000p. Next time, I’ll just wire brush it, it looked way better that way!!
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
✨About the TIP JAR: it's hard to make money on YouTube and melting stuff can be pricy..
I'm not eligible for the YouTube partner program and even then, the "payout" is almost nothing.
So a YouTuber made this app, with his own money, to reward smaller YouTubers (here's the link to that video: https://www.youtube.com/watch?v=7gTvqauiXSg ) So I made an account, so people (if they want !!) can tip me.
Where is the money for? Simple, for the channel! To expand, make more interesting videos, equipment, tools, etc. .. Even a small amount is appreciated! here is the link, check it out and if you think I deserve a tip, you can tip me😉. ⬇️
https://koji.to/k/6xii
**** I post a new video every
Friday around 1 am ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
4
views
MELTING COPPER, BRASS AND ALUMINUM😱 #devilforge #metalcasting
Hello everyone 👋🏻.
#copper #brass #aluminum #devilforge #casting #metalcasting #melting
I want to thank you all for the support, likes, subscribes, comments and sharing you have been doing!
The channel exploded and it’s now even over 2000 subscribers!!! So thank you! Therefor I’ve made these pieces for you, to give something back.
One of you can win 3 custom pieces (aluminum, brass and copper) i’ve created myself so you won’t find these anywhere else😉.
Now, the rules:
#1
comment with a sentence containing “ I want to win SJWCasting ” spelled like this with the capital letters 😉. I will pick a comment with a machine on the internet only with the sentences “ I want to win SJWCasting “ anything else isn’t valid!
#2
only one comment per person.
#3
you have till September 30 to enter, I’ll announce the winner in the video on October 7.
Best off luck to all!!
So this week I’ve made 3 ingots for the giveaway. I really like the ingots, there small but I think they look cool!! First started with the copper ones, I was struggling with the molds. Spend some hours on getting it the right way. But I managed it. The pours where great, didn’t spill anything this time😂. Then it was time for the brass, I used a little bit to much borax I think, so much left in the crucible afterwards.. I cleaned the copper and brass ones. Melted the Aluminum ones the next morning, it was a busy weekend, but I’m glad it all worked out! And I hope I can make one of you happy with the custom ingots! Thanks for everything! Lets get the channel to 10.000 subscribers😁.
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
✨About the TIP JAR: it's hard to make money on YouTube and melting stuff can be pricy..
I'm not eligible for the YouTube partner program and even then, the "payout" is almost nothing.
So a YouTuber made this app, with his own money, to reward smaller YouTubers (here's the link to that video: https://www.youtube.com/watch?v=7gTvqauiXSg ) So I made an account, so people (if they want !!) can tip me.
Where is the money for? Simple, for the channel! To expand, make more interesting videos, equipment, tools, etc. .. Even a small amount is appreciated! here is the link, check it out and if you think I deserve a tip, you can tip me😉. ⬇️
https://koji.to/k/6xii
**** I post a new video every
Friday around 1 am ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
30
views
Pouring #copper #brass & #aluminum 🔥 #devilforge
Hello everyone!👋🏻
This is a tease of what you can expect in this Friday’s video! Yes! 3 melts😱. And yes, it’s for a giveaway 😱😁. So don’t miss it! This Friday!
#copper #melting #devilforge #casting #metalcasting #aluminum #brass #furnace
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
✨About the TIP JAR: it's hard to make money on YouTube and melting stuff can be pricy..
I'm not eligible for the YouTube partner program and even then, the "payout" is almost nothing.
So a YouTuber made this app, with his own money, to reward smaller YouTubers (here's the link to that video: https://www.youtube.com/watch?v=7gTvqauiXSg ) So I made an account, so people (if they want !!) can tip me.
Where is the money for? Simple, for the channel! To expand, make more interesting videos, equipment, tools, etc. .. Even a small amount is appreciated! here is the link, check it out and if you think I deserve a tip, you can tip me😉. ⬇️
https://koji.to/k/6xii
**** I post a new video every
Friday around 1 am ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
22
views
4
comments
Melting ALUMINUM dross, is it worth it?!🤔(4K) #devilforge #melting
Hello everyone👋🏻,
First things first:
the channels you need to see!😉:
-Heinrichsmade: https://www.youtube.com/user/mheinjr
-J'sStack: https://www.youtube.com/c/JsStack
-Silver Scorpion : https://www.youtube.com/channel/UCBH59YGqCRhh6AwwrHMYugw
-scrap2cast: https://www.youtube.com/channel/UCQFCHF3SJHH5qibTldGJTJA
-dragon atelier: https://www.youtube.com/c/DragonAtelier
-kraken casting: https://www.youtube.com/c/KrakenCasting
and many more you can find in my subscriptions 😁. So go say hi and let them know who send you😉.
#melting #casting #devilforge #copper #aluminum #metalcasting
This weeks melt was something else, cameras overheating all the time, aluminum acting weird... Fun day...😒.
And that's why I didn't make the ingot shine like a mirror, to many things not going as planned.
Is it because I left it for to long in the garage?
Do you know?
If you do, please let me know in the comments.
It almost felt like melting zinc, but without the mess of overheating it.
Other then that, got a nice ingot out of it😉.
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
✨About the TIP JAR: it's hard to make money on YouTube and melting stuff can be pricy..
I'm not eligible for the YouTube partner program and even then, the "payout" is almost nothing.
So a YouTuber made this app, with his own money, to reward smaller YouTubers (here's the link to that video: https://www.youtube.com/watch?v=7gTvqauiXSg ) So I made an account, so people (if they want !!) can tip me.
Where is the money for? Simple, for the channel! To expand, make more interesting videos, equipment, tools, etc. .. Even a small amount is appreciated! here is the link, check it out and if you think I deserve a tip, you can tip me😉. ⬇️
https://koji.to/k/6xii
**** I post a new video every
Friday around 1 am ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
26
views
Melting Copper Wire 😁 #copper #melting #coins #devilforge
Hello everyone!
#melting #devilforge #casting #copper #asmr #metalcasting #smelting
This week I've melted some copper wires i've found and made a proper stake out off zinc. I've made two copper coins for two other YouTubers, I don't know if they know. But I've promised them I make them something. Keep an eye out to the channels I'm subscribed to, you might see the coins again😏.
I started melting before I made the molds, that was not that smart.. The devil forge does a great job melting copper, so the copper was ready before the molds where..🤦🏻♂️
So when I got the flasks ready, heated up the copper again, I start missing the hole in the little flask! Not once!! But twice😐. The floor in the garage looks, just awful 🫣.
So I don't think I will be using that flask ever again😂.
I just love the coins in copper! So I hope, those two will appreciate it that I made those for them😉.
Thank you all for watching! The short of this video did great!! over 58K times watched & +700 likes !!!!😱. The channel will get 1000 subscribers in no time!😁
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
✨About the TIP JAR: it's hard to make money on YouTube and melting stuff can be pricy..
I'm not eligible for the YouTube partner program and even then, the "payout" is almost nothing.
So a YouTuber made this app, with his own money, to reward smaller YouTubers (here's the link to that video: https://www.youtube.com/watch?v=7gTvqauiXSg ) So I made an account, so people (if they want !!) can tip me.
Where is the money for? Simple, for the channel! To expand, make more interesting videos, equipment, tools, etc. .. Even a small amount is appreciated! here is the link, check it out and if you think I deserve a tip, you can tip me😉. ⬇️
https://koji.to/k/6xii
**** I post a new video every
Friday around 1 am ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
46
views
Helping someone out, casting aluminum stakes (4K) #melting #casting
Hello everyone 👋🏻.
#melting #devilforge #casting #asmr #metalcasting #aluminum #smelting
This week iv'e melted some aluminum and made 2 stakes for someone of the family. Their stakes where made out off plastic and broke, so he asked me if I could make him a new pair. Off course I couldn't say no 😉. I needed to try it out a couple off times, but I'm still going to try it out again. Pour them vertically in stead of horizontally. So let's hope those will look better🤞😉.
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
✨About the TIP JAR: it's hard to make money on YouTube and melting stuff can be pricy..
I'm not eligible for the YouTube partner program and even then, the "payout" is almost nothing.
So a YouTuber made this app, with his own money, to reward smaller YouTubers (here's the link to that video: https://www.youtube.com/watch?v=7gTvqauiXSg ) So I made an account, so people (if they want !!) can tip me.
Where is the money for? Simple, for the channel! To expand, make more interesting videos, equipment, tools, etc. .. Even a small amount is appreciated! here is the link, check it out and if you think I deserve a tip, you can tip me😉. ⬇️
https://koji.to/k/6xii
**** I post a new video every
Friday around 1 am ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
13
views
How to #sandcast a #signetring #punisher version #casting
Hello everyone 👋🏻.
I made this video because a couple of people asked me how I sandcasted the punisher rings.
#melting #casting #asmr #copper #brass #metalcasting #smelting #aluminum
If you want, I will make a better video of this. A video that’s longer than 1min. 😂. And where I explain it better. So if you want that, let me know in the comments.
To be honest, it was hard fitting all the information into this 1min. short video😅.
I wanted to find a way to sandcast rings and I searched for a couple weeks until I find a way. I was brainstorming like crazy but couldn’t make it work.
Searched on YouTube many times and after weeks and weeks of searching, I found it.
A video where someone was making rings in a method I could do too.
After I tried it that way, it just worked. And I was happy I didn’t have to search anymore 😂.
So I hope more people are helped with this video, to save you some headache 😉.
So if you are helped, leave a like and subscribe.
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
✨About the TIP JAR: it's hard to make money on YouTube and melting stuff can be pricy..
I'm not eligible for the YouTube partner program and even then, the "payout" is almost nothing.
So a YouTuber made this app, with his own money, to reward smaller YouTubers (here's the link to that video: https://www.youtube.com/watch?v=7gTvqauiXSg ) So I made an account, so people (if they want !!) can tip me.
Where is the money for? Simple, for the channel! To expand, make more interesting videos, equipment, tools, etc. .. Even a small amount is appreciated! here is the link, check it out and if you think I deserve a tip, you can tip me😉. ⬇️
https://koji.to/k/6xii
**** I post a new video every
Friday around 1 am ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
3
views
MIXING SILVER AND COPPER🤔 looks like ROSE GOLD!!#melting #casting #copper #smelting #rosegoldrings
Hello everyone 👋🏻.
#melting #devilforge #casting #copper #asmr #smelting #furnace #metalcasting #silver
This week I’ve melted some copper and mixed it with silver.
It looks like rose gold! But cheaper 😏. I got the idea when I talked to Mike Pommer, I asked him if there is something like rose gold but not that pricy😅. He told me 90% copper and 10% silver is as good as rose gold.
So I needed to try that out. As my girlfriend likes pink stuff, I made the smaller ring for her and she liked it😉. And that’s what it all about😉.
About the pour.. I missed one, and poured to much in the other flask😑. Got a camera set up, right above!! And it overheated, so no closeup 😔. Hope the temperature will drop soon because I keep loosing footage like this😔.
I hope you liked it! Got some bigger melts planned, so I hope the temperature drops fast so we can get to 300kg fast 😁.
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
✨About the TIP JAR: it's hard to make money on YouTube and melting stuff can be pricy..
I'm not eligible for the YouTube partner program and even then, the "payout" is almost nothing.
So a YouTuber made this app, with his own money, to reward smaller YouTubers (here's the link to that video: https://www.youtube.com/watch?v=7gTvqauiXSg ) So I made an account, so people (if they want !!) can tip me.
Where is the money for? Simple, for the channel! To expand, make more interesting videos, equipment, tools, etc. .. Even a small amount is appreciated! here is the link, check it out and if you think I deserve a tip, you can tip me😉. ⬇️
https://koji.to/k/6xii
**** I post a new video every
Friday around 1 am ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
55
views