DIY Shiny Brass Sphere Challenge: Can You Do Better Than Me? #devilforge #brass #melting
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold
This week I melted some brass cut-offs to make a sphere, or tried to make a sphere 😏.
Too bad for the hole on the bottom but now I can put it somewhere and it doesn’t role away 😁.
MERCH: https://sjwcasting-shop.fourthwall.com
WHY I STARTED SELLING MERCH?
Easy⬇️
By selling merch, I can earn a little bit money (not that much..) and put more in the channel.
Also, I can save more of my own money so we can move to a bigger place.
With a bigger workplace because it’s getting claustrophobic in the garage,
with other projects I’m starting soon, I’ll need more space, much more space!!!
Everything you see is created by yours truly 😁. I spend much time on this. Ordered a bunch of stuff to test and adjust. Now it’s all ready!! I will release more merch in the summer, limited edition!! And more after, but I need some inspiration first😉.
❗️-Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
https://artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
❗️-If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindingsltd?ref=l2-about-shopname
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
4
views
How to Turn Junk Pizza Pans into $$$ Aluminum Ingots! #metalcasting #aluminum #ingots #belgium
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold
This week I melted some aluminum pizza trays..
I’ve eaten a lot of pizza’s to melt all the trays 😏.
But it was worth it! Now I can start saving up way more!!
I was a bit disappointed, I thought it would weigh more. That I’ve got over 1kg..
I wasn’t close to 1kg 😑. So y’all need to buy merch so I can buy more pizza’s 🤣.
MERCH: https://sjwcasting-shop.fourthwall.com
WHY I STARTED SELLING MERCH?
Easy⬇️
By selling merch, I can earn a little bit money (not that much..) and put more in the channel.
Also, I can save more of my own money so we can move to a bigger place.
With a bigger workplace because it’s getting claustrophobic in the garage,
with other projects I’m starting soon, I’ll need more space, much more space!!!
Everything you see is created by yours truly 😁. I spend much time on this. Ordered a bunch of stuff to test and adjust. Now it’s all ready!! I will release more merch in the summer, limited edition!! And more after, but I need some inspiration first😉.
❗️-Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
https://artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
❗️-If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindingsltd?ref=l2-about-shopname
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
16
views
From Liquid to Solid: Casting a Massive Brass Ingot from Scratch #devilforge #brass #belgium
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold
This week I melted some brass scrap pieces.
I didn’t overheat the brass!! I’m getting better at it😏!!
I used many pads to get the mirror finish = 80, 120, 200, 400, 600, 800, 1000, 2000 & 3000.
I only started using WD-40 for the last 3 grids.
Then I buffed it up, easy peasy 😁.
Relaxing music from video: VAN DAMME : https://www.youtube.com/watch?v=BtRVFSDjo2g enjoy😁.
So the merch site will be launched after this video! For the first 15 people use code FIRSTMERCH .
I really hope you like what I created!! Site: https://sjwcasting-shop.fourthwall.com
Everything you see is created by yours truly 😁. I spend much time on this. Ordered a bunch of stuff to test and adjust. Now it’s all ready!! I will release more merch in the summer, limited edition!! And more after, but I need some inspiration first😉.
WHY I STARTED SELLING MERCH?
Easy⬇️
By selling merch, I can earn a little bit money (not that much..) and put more in the channel.
Also, I can save more of my own money so we can move to a bigger place.
With a bigger workplace because it’s getting claustrophobic in the garage,
with other projects I’m starting soon, I’ll need more space, much more space!!!
❗️-Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
https://artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
❗️-If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindingsltd?ref=l2-about-shopname
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
8
views
♨️Melting Copper Dust Fail #metalcasting #devilforge #copper #copperingotmold #ingot #belgium
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold
This week I melted some copper. I started with some copper dust but i couldn’t get the copper liquid. I was all chunky, someone knows how that’s possible? Let me know.
The copper pieces I melted later did melt the proper way 😏, but then I had holes in the ingots.. only with the last attempt, I didn’t had holes in the bigger ingot mold. With the smaller I still had holes.. so I think I need new graphite molds..
I played with a small torch to give one ingot a nice finish but I have mixed feelings about the ingot.. I want more green color in it.
So the merch site will be launched next week (if everything goes as planned!)
T-shirts and hoodie arrived and I’m sure you’ll like it too😁.
I will have some limited merch so keep an eye out!
By doing this, I can earn a little bit money (not that much..) and put more in the channel.
Also, I can save more of my own money so we can move to a bigger place.
With a bigger workplace because it’s getting claustrophobic in the garage,
with other projects I’m starting soon, I’ll need more space, much more space!!!
❗️-Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
https://artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
❗️-If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindingsltd?ref=l2-about-shopname
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
13
views
Melting Zinc Fail #devilforge #metalcasting #zinc #melting
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold
This week I made some ingots out of zinc I got from a friend.
I used the cast iron molds but 2 zinc ingots got stuck in the smallest ones.
I did everything I could to release them but I failed.
So that’s why I put them in the crucible.
That helped😁.
Im currently working on some merch: tshirts, hoodies, hats, beanies, cups..
I bought a t-shirt and beanie, t-shirt is of good quality but the placement of the logo wasn’t what I expected.
So I made some changes.. I’m waiting on my order (hope to get them next week).
(I want to see the product in person before I share the site with you guys and gals!)
I won’t sell crappy mercy to my loyal fans!
There will be plenty to choose from! I’m exited to put the site up!
By doing this, I can earn a little bit money (not that much..) and put more in the channel.
Also, I can save more of my own money so we can move to a bigger place.
With a bigger workplace because it’s getting claustrophobic in the garage,
with other projects I’m starting soon, I’ll need more space!
Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
https://artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindingsltd?ref=l2-about-shopname
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
22
views
Huge Aluminum casts #metalcasting #devilforge #aluminum #scrapping
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold
This week I made some ingots out of some scrap aluminum.
With the bad weather I had to be quick. I hope better weather is coming soon!
I got some big ingots out of the scrap. Io should order some more big ingot molds.
That would be much easier.
Im currently working on some merch: tshirts, hoodies, hats, beanies, cups..
I bought a t-shirt and beanie, t-shirt is of good quality but the placement of the logo wasn’t what I expected.
So I made some changes.. now I need to order it again to see if it’s better.
(I want to see the product in person before I share the site with you guys and gals!)
I won’t sell crappy mercy to my loyal fans!
There will be plenty to choose from! I’m exited to put the site up!
By doing this, I can earn a little bit money (not that much..) and put more in the channel.
Also, I can save more of my own money so we can move to a bigger place.
With a bigger workplace because it’s getting claustrophobic in the garage,
with other projects I’m starting soon, I’ll need more space!
Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
https://artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindingsltd?ref=l2-about-shopname
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
20
views
Melting A Bunch Of Copper. #copper #devilforge #melting #scrapping #ingots
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold
This week I made some ingots and coins from copper wire.
String wire isn’t that fun. But seeing the results makes it worth it!!
The hours of stripping in the cold garage..
But I’m also happy I could make a video for you guys and gals!!
I prefer editing over stripping😂.
Im currently working on some merch: tshirts, hoodies, hats, cups..
When I get the test samples and the quality is any good, I’ll share the site with you guys and gals!
I won’t sell crappy mercy to my loyal fans!
By doing this, I can earn a little bit money (not that much..) and put more in the channel.
Also, I can save more of my own money so we can move to a bigger place.
With a bigger workplace because it’s getting claustrophobic in the garage, with other projects I’m starting, I’ll need more space!
If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindingsltd?ref=l2-about-shopname
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
21
views
Uncovering Hidden Riches: How One Person's Scrap Brass Became a Treasure Trove! #brass #metalcasting
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold
This week I made some ingots and coins from brass scrap pieces.
In my opinion, the brass poured pretty good.
So the coins came out nice😁.
I was tempering a crucible for next weeks video, got a bunch of new crucibles now.
So now I can melt everything in a different crucible and not contaminate the material.
If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindingsltd?ref=l2-about-shopname
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
38
views
Nordic Gold Scrap To Treasure/#nordicgold #metalcasting #devilforge #casting
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold
This week I decided to remelt all the nordic gold I had.
All the slag, spills, cut-offs..
Time for a Nice ingot and half coin😑.
I set the gas pressure to 0,12 mpa (same as with copper)
First I had it set on 0,10 mpa but it took way to long..
Bottle was freezing up..
Otherwise I remelted the coin and ingot.
And i was stupid enough to sand down the front of the ingot🤦🏻♂️.
I don’t regret much in life, but that…
I won’t be dong that again!!
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
17
views
🔥Copper & Aluminum VS. ⭕️Orbeez #metalcasting #copper #aluminum #orbeez #devilforge #casting
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #giveaway
This week I poured some molten copper & aluminum into a bucket of orbeez.. (little balls that absorb water)
The aluminum blob from last week did came out way better this time😁.
I poured slower and had less water in the bucket this time!!
The copper one Is really small compared to the aluminum one😂.
But I like both of them.
I don’t think I’ll use Orbeez again till summer😉.
The ingots look great (couple of holes) and I’m wondering if I can sell these.
(Need to set up the site first..)
The selling and profit of the ingots will not being showed on this channel yet.
For that journey, you need to check out my other channel @sjwcshorts
I used it for trying out shorts and all of the sudden, the channel blew up..
Over 1 million views on one short in just days..
So I’m trying to get monetized for that channel too!
Feel free to subscribe😏, so you can see how much money there is involved in ingots selling 😁.
‼️P.O. BOX: ‼️
The only thing you need to add before SJWCasting is T.A.V. this is important!!
After weeks of looking for some place or solution, here it is!!😃 (try sending it with Bpost)
So: T.A.V. SJWCasting
't Bolkske
Bolk 142
2350 Vosselaar
Belgium
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
*** You can take a look at my channel for more content: https://youtube.com/channel/UCWpgnKHp... ***
**** If you want, you can support the channel by buying me some gas, equipment, tools… : Thank you all for watching and I’ll hope to see you next time!😁.
Be sure to check out the other channels on my YouTube channel, let's support the community💪🏻😁.
https://www.paypal.me/buymesomegas ****
If you want, you can super thank me😆. No serious, you can give me a small amount of money to support the channel. I see some people doing it, and I’m so grateful for that! Thank you!!
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
35
views