Otis Technology

In this video we demonstrate how to clean the CZ P10 C pistol using the Otis Technology 3 Step Cleaning Process with Memory Flex cable, patches and Shooter's Choice FP-10 CLP Lubricant Elite. Products used in this video Otis 9mm Pistol Cleaning Kit: https://otistec.com/9mm-pistol-cleaning-kit-1/ Otis AP Brush: https://otistec.com/3-pack-ap-brushes-2-nylon-1-blue-nylon/ Shooter's Choice FP-10 CLP: https://otistec.com/shooters-choice-fp-10-lubricant-elite-clp-4oz/ Otis Microfiber Cloth: https://otistec.com/microfiber-gun-cloth-3-pack/ How to tie and Otis gun cleaning patch video: https://www.youtube.com/watch?v=FztGHCWNvZ8 Otis 3-Step Cleaning Process video: https://www.youtube.com/watch?v=9UnBHw_2vYM Otis products include a No-Nonsense Warranty and are manufactured in Lyons Falls, NY, USA Breech-to-Muzzle® is a Registered Trademark of Otis Technology We are #AmericasGunCare ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology Website: https://otistec.com/ Rumble: https://rumble.com/user/otistechnology Juxxi/Full30: https://www.full30.com/channel/otistechnology CZ-USA's recommended gun cleaning procedure from their owners manual: CLEANING THE PISTOL When to clean the pistol: • As soon as possible after each use • If the firearm gets wet • At least once a year in a temperate climate • As often as once a month in a tropical climate, or other demanding environment Cleaning the Barrel Bore and the Cartridge Chamber If the pistol has not been fired or if only a few cartridges have been fired, clean the barrel bore and cartridge chamber with a clean patch attached to the cleaning rod. Repeat the cleaning, changing patches, until the last patch comes out clean. When the barrel bore is very dirty, apply a quality firearms CLP (Cleaner, Lubricant, Protectant) using a cleaning brush. Let the solvent act for about 10 minutes (this time may vary depending on the degree of fouling). Then thoroughly scrub out the barrel bore. Subsequently, dry the barrel bore and cartridge chamber with a clean patch and check that all powder residues or fouling have been removed. If necessary repeat this procedure. The cleaning rod and the brush must be inserted into the barrel bore from the chamber, to prevent wear or damage to the muzzle. Pass the brush all the way through the barrel bore before reversing the movement. If you change directions with the brush in the barrel, the brush could stick. Cleaning of Other Pistol Parts Other parts of the pistol (including the external surfaces of the barrel) should be cleaned with a cleaning brush and a dry cloth. A quality CLP can be used for proper cleaning. Never use an agent specifically designed for barrel bore cleaning! These solutions could remain in the joints, and after some time could cause corrosion. Check that cloth particles or brush bristles have not become lodged in any part of the pistol. Preserving When the barrel’s bore, chamber, and all other accessible parts of the firearm are clean and dry, apply a thin film of CLP via a cloth. Place several drops of oil: • Around the exterior of the barrel 1/4” back from the muzzle • At the locking surface where the front of the barrel hood locks into the slide when the firearm is in battery (above the chamber on the barrel) • On each of the rails within the frame, located on the frame inserts Remove all excess oil from the exterior of the firearm. Before shooting, always wipe the barrel bore dry. For use in extremely low temperatures, remove the oil from all accessible parts of the firearm or apply a lubricant prepared especially for these conditions. The application of thick preserving agents such as grease should only occur for long-term storage in demanding climate environments, and before any use of the pistol it must be thoroughly removed from all parts of the firearm.

Check out the full-length video on our channel: https://www.youtube.com/watch?v=mtJtugIdgnc Otis Technology Smart Gun Care

In this video Otis Technology Digital Marketing & Ecommerce Manager, Jared Sturtevant (@MudLakeRanch) explains the importance of gun care and why cleaning from breech to the muzzle is his preferred method of cleaning. Jared also demonstrates the Otis 3-Step Gun Cleaning process that was pioneered over 35 years ago by the gun cleaning professionals at Otis Technology; as well as basic preventative maintenance for your semi-automatic pistol. The cleaning method demonstrated in this video was used to clean the Savage Stance 9mm semi-automatic handgun, and this method can be applied most modern semi-automatic handguns from competition pistols to your everyday carry gun to keep them looking like new and so they work properly when you need them to. Your life may depend on it. Chapters: :00 Intro Trailer :43 Video Intro 1:36 Step by step cleaning instructions for how to clean the bore of a semi-automatic pistol 3:20 How to clean the bolt on a bolt-action rifle 6:44 Outro How to tie an Otis Patch: https://www.youtube.com/watch?v=FztGHCWNvZ8&feature=youtu.be Products used in this video: Otis Ripcord 9mm: https://otistec.com/9mm-38-cal-357-cal-rifle-pistol-ripcord/ Otis 9mm Pistol Cleaning Kit with Brass Rod: https://otistec.com/9mm-38-cal-357-sectional-rod-pistol-cleaning-kit/ Otis Professional Pistol Cleaning Kit: https://otistec.com/professional-pistol-cleaning-kit/ Otis Microfiber Cloth: https://otistec.com/microfiber-gun-cloth-3-pack/ Otis Nylon AP Brush: https://otistec.com/10-pack-nylon-ap-brushes/ Shooter's Choice FP-10 Lubricant Elite CLP: https://shooters-choice.com/fp-10-lubricant-elite-clp/ Otis products include a No-Nonsense Warranty and are manufactured in Lyons Falls, NY, USA Breech-to-Muzzle® is a Registered Trademark of Otis Technology We are #AmericasGunCare ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology YouTube: https://www.youtube.com/otistechnology Website: https://otistec.com/ Rumble: https://rumble.com/user/otistechnology Juxxi/Full30: https://www.full30.com/channel/otistechnology Subscribe today: https://www.youtube.com/user/OtisTechnologyInc/?sub_confirmation=1

In this video Otis Technology Brand Ambassador, Nikki Boxler (@MapleFarmer) explains the importance of gun care and why cleaning from breech to the muzzle is the preferred method of hunters and recreational shooters like her. Nikki also demonstrates the Otis 3-Step Gun Cleaning process that was pioneered over 35 years ago by the gun cleaning professionals at Otis Technology; as well as basic preventative maintenance for your bolt-action rifle(s). The cleaning method demonstrated in this video was used to clean Nikki's personal firearm; a Model Winchester chambered in .270 Caliber; and this method can be applied most modern bolt-action rifles to keep them looking like new and running smoothly for years to come. Chapters: :38 What are the different methods of gun cleaning? 1:06 Step by step cleaning instructions for how to clean the bore of a bolt-action rifle's barrel 3:20 How to clean the bolt on a bolt-action rifle 4:44 Outro How to tie an Otis Patch: https://www.youtube.com/watch?v=FztGHCWNvZ8&feature=youtu.be Products used in this video: Otis Ripcord for shotguns: https://otistec.com/ripcord/shotgun/ Otis Multi-Caliber Sectional Rod Rifle Cleaning Kit: https://otistec.com/sectional-rod-multi-caliber-rifle-cleaning-kit/ Otis Universal Rifle Cleaning Kit: https://otistec.com/universal-rifle-cleaning-kit/ Otis Microfiber Cloth: https://otistec.com/microfiber-gun-cloth-3-pack/ Otis Nylon AP Brush: https://otistec.com/10-pack-nylon-ap-brushes/ Shooter's Choice FP-10 Lubricant Elite CLP: https://shooters-choice.com/fp-10-lubricant-elite-clp/ Otis products include a No-Nonsense Warranty and are manufactured in Lyons Falls, NY, USA Breech-to-Muzzle® is a Registered Trademark of Otis Technology We are #AmericasGunCare ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology YouTube: https://www.youtube.com/otistechnology Website: https://otistec.com/ Rumble: https://rumble.com/user/otistechnology Juxxi/Full30: https://www.full30.com/channel/otistechnology Subscribe today: https://www.youtube.com/user/OtisTechnologyInc/?sub_confirmation=1

In this video Otis Technology Brand Ambassador, Amy Cawley (@hershootingjourney2444 ) explains the importance of gun care and why cleaning from breech to the muzzle is the preferred method of the competitive shooters like her. Amy also demonstrates the Otis 3-Step Gun Cleaning process that was pioneered over 35 years ago by the gun cleaning professionals at Otis Technology; as well as basic choke tube cleaning, and preventative maintenance for your over-under shotgun. The cleaning methods demonstrated in this video can be applied to your single shot, side by side, pump action, and semi-automatic shotguns, to clean the bore, choke tube(s), action, and exterior of the firearm; to keep them looking like new and running smoothly for years to come. Chapters: Video Intro Trailer: 0:00 Amy's Introduction: :54 Shotgun Bore Cleaning Process 1:48 Choke Tube Cleaning Process: 4:37 Exterior Wipe Down of the shotgun barrel: 8:17 8:43 Outro How to tie an Otis Patch: https://www.youtube.com/watch?v=FztGHCWNvZ8&feature=youtu.be Products used in this video: Otis Ripcord for shotguns: https://otistec.com/ripcord/shotgun/ Otis 12 Gauge Sectional Rod Gun Cleaning Kit: https://otistec.com/12-gauge-sectional-rod-shotgun-cleaning-kit/ Otis Universal Shotgun Cleaning Kit: https://otistec.com/universal-shotgun-cleaning-kit/ Otis Microfiber Cloth: https://otistec.com/microfiber-gun-cloth-3-pack/ Shooter's Choice FP-10 Lubricant Elite CLP: https://shooters-choice.com/fp-10-lubricant-elite-clp/ Shooter's Choice Choke Tube Cleaner: https://shooters-choice.com/shotgun-and-choke-tube-cleaner/ Shooter's Choice Grease: https://shooters-choice.com/synthetic-all-weather-high-tech-grease/ Shooter's Choice Quick Scrub III: https://shooters-choice.com/quick-scrub-iii/ Otis products include a No-Nonsense Warranty and are manufactured in Lyons Falls, NY, USA We are #AmericasGunCare ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology YouTube: https://www.youtube.com/otistechnology Website: https://otistec.com/ Rumble: https://rumble.com/user/otistechnology Juxxi/Full30: https://www.full30.com/channel/otistechnology Subscribe today: https://www.youtube.com/user/OtisTechnologyInc/?sub_confirmation=1

Stance is a micro-compact 9mm that is easily concealed and built to be functional in the hand. With its defined surface textures, advanced slide serrations and ergonomic grip, Stance is designed to be comfortable when holstered and assured when it needs to be. This Stance is on loan to Otis for gun cleaning demonstration purposes so we sent many rounds down range to get it dirty first.

In this video we breakdown and clean the 2023 American Hunter Handgun of the Year the Savage 110 PCS is a bolt-action pistol; built around the 110’s factory blueprinted action. Products used in this video: Otis Universal Rifle Cleaning Kit FG-210: https://otistec.com/universal-rifle-cleaning-kit/ Otis Microfiber Cloth: https://otistec.com/microfiber-gun-cloth-3-pack/ At Otis, our mission is to rethink and redefine gun care, giving gun owners better and smarter ways to keep their most cherished firearms in the best condition possible. That’s why our products are American-made and backed by a No-Nonsense Guarantee. We are #AmericasGunCare. ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology YouTube: https://www.youtube.com/otistechnology Website: https://otistec.com/ Rumble: https://rumble.com/user/otistechnology Juxxi/Full30: https://www.full30.com/channel/otistechnology Subscribe today: https://www.youtube.com/user/OtisTechnologyInc/?sub_confirmation=1

Greg from Otis Technology gives his first impressions on the CZ P-10 C and CZ-P10F Competition Series 9mm pistols from CZ USA and demonstrates how to field strip and clean these firearms using the Otis Memory-Flex® cable Breech-to-Muzzle® gun cleaning system. Chapters: CZ P-10 Series Overview :52 How to disassemble the CZ P-10 Pistol 3:59 How to Clean the CZ P-10 Series Pistols 4:35 Product used: https://otistec.com/9mm-pistol-cleaning-kit-1/ Otis products include a No-Nonsense Warranty and are manufactured in Lyons Falls, NY, USA We are #AmericasGunCare ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology YouTube: https://www.youtube.com/otistechnology Website: https://otistec.com/ Juxxi/Full30: https://www.full30.com/channel/otistechnology Subscribe today: https://www.youtube.com/user/OtisTechnologyInc/?sub_confirmation=1

Greg and Jared from Otis Technology discuss PRO+ Snap Caps; from their purpose and design, to practical uses including misfire and dry fire training scenarios. Snap Caps are a reusable training tool perfect for inexpensive practice with your firearm, safety training, doing function checks or checking/adjusting trigger pull. Snap Caps are also recommended for safe decocking of firearms without fear of firing pin damage or releasing tension on hammer springs while in storage. Don’t let the cost of ammunition or lack of range time get in the way of dry fire drills or cycling practice. Precision machined of solid aluminum to closely represent to weight and feel of actual ammunition and hard anodized in red for easy identification. Otis PRO+ Snap Caps: https://otistec.com/otis-snap-caps/ Available in the following pistol calibers: 9mm, .38 special/.357mag, .380ACP, .40S&W, .44 MAG, .45 Colt, .45ACP. Otis products include a No-Nonsense Warranty and are manufactured in Lyons Falls, NY, USA We are #AmericasGunCare ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology YouTube: https://www.youtube.com/otistechnology Website: https://otistec.com/ Juxxi/Full30: https://www.full30.com/channel/otistechnology Subscribe today: https://www.youtube.com/user/OtisTechnologyInc/?sub_confirmation=1

When you buy from Otis, you are directly supporting the American Workforce from design, engineering & manufacturing to warehousing, shipping, sales & marketing. Otis is proud to be America’s Gun Care. #otistechnology #smartguncare #madeintheusa #guncleaning #guncare

The AK Platform is known for its capability to fire a lot of rounds down range and probably hit something; they're also known for their loose-fitting parts that contribute to its reliability, allowing them to continue to run while caked in fouling and baked-on carbon. Like all things mechanical; even AK's require cleaning and lubrication. Any action that becomes too dirty can fail to operate. Kalashnikov recognized this and designed the platform with a cleaning kit hidden away in the butt stock and a cleaning rod below the barrel because it has to work when your life depends on it. In this video, Greg demonstrates how to disassemble and clean your AK, using modern cleaning equipment from Otis Technology, to keep it running smooth and looking great. If you're an AK owner or have extensive trigger time with them, let us know your opinion on AK cleaning and lubrication in the comments. Otis products include a No-Nonsense Warranty and are manufactured in Lyons Falls, NY, USA We are #AmericasGunCare ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology YouTube: https://www.youtube.com/otistechnology Website: https://otistec.com/ Juxxi/Full30: https://www.full30.com/channel/otistechnology Subscribe today: https://www.youtube.com/user/OtisTechnologyInc/?sub_confirmation=1

Watch The Gundies Awards: https://youtu.be/QP8kxnuVfdg

Frank from Premier Body Armor thanks Otis for saving his range day by providing gun cleaning equipment and lube to get their 9mm PCC running for the Gundies 2023.

Dark Storm Industries thanks Otis for making quick work of gun cleaning before the Gundies Expo after the range day left these short twin tropical blackouts completely filthy.

The B.O.N.E.® Tool was designed specifically to clean carbon and fouling from the bolt carrier assembly area of MSR/AR style rifles. This quick-clean tool scrapes fouling from the bolt, bolt carrier and firing pin. Also includes an 8-32 threaded hole to act as T-handle. Available for 5.56mm or 7.62mm MSR/AR style rifles. Note: While this tool fits many bolts flawlessly, it may fit some bolts better than others due to variance in bolts by different manufacturers. -Designed specifically to clean carbon & fouling from the bolt carrier assembly area of MSR/AR style rifles -Scrapes carbon and fouling from the bolt, bolt carrier and firing pin -Includes a 8-32 threaded hole to act as a T-handle -Available for 5.56mm (works with .223/5.56mm/300 Blackout/.350Legend), or 7.62mm (works with .308/7.62/6.5 Creedmoor/.243 Winchester) Otis products include a No-Nonsense Warranty and are manufactured in Lyons Falls, NY, USA We are #AmericasGunCare ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology YouTube: https://www.youtube.com/otistechnology Website: https://otistec.com/ Juxxi/Full30: https://www.full30.com/channel/otistechnology Subscribe today: https://www.youtube.com/user/OtisTechnologyInc/?sub_confirmation=1

Otis prides itself on manufacturing compact, lightweight, easy-to-use gun cleaning equipment and accessories. All of our cleaning systems follow the Breech-to-Muzzle® cleaning principle where fouling is pulled out in the direction the bullet travels. This prevents additional fouling depositing in the action. Our cleaning systems feature Memory-Flex® cables which allow for Breech-to-Muzzle® cleaning without disassembly. The coated cables and brass components won’t scratch your firearm and the 100% cotton patches are proprietary and offer a more complete cleaning. The Breech-to-Muzzle® 3 step gun cleaning basics: 1. Wet Patch: Pull an Otis patch saturated with CLP through the bore from Breech-to-Muzzle® 2. Bore Brush: Pull a bore bronze or nylon bore brush through your barrel from Breech-to-Muzzle® 3. Dry Patch: Pull a dry Otis patch through the bore from Breech-to-Muzzle® Repeat as needed, until clean. Otis products include a No-Nonsense Warranty and are manufactured in Lyons Falls, NY, USA We are #AmericasGunCare ►CHECK US OUT! Facebook: https://www.facebook.com/otistechnology Instagram: www.instagram.com/otistechnology YouTube: https://www.youtube.com/otistechnology Website: https://otistec.com/ Juxxi/Full30: https://www.full30.com/channel/otistechnology Subscribe today: https://www.youtube.com/user/OtisTechnologyInc/?sub_confirmation=1

Every person is different and unique when it comes to carrying concealed, and Otis Technology is here to show just that! Greg Essenlohr and Matt Ferland are joined today with Mollie Martin to talk about all things concealed carry. When Greg and Matt learned that Mollie does not feel comfortable carrying concealed, but always wanted to, they decided to speak with her, and show her the ropes around carrying concealed. In this video, you will learn some tips and tricks on how to carry concealed, some of the popular firearm options, the importance of knowing the laws surrounding concealed carry, and ways to feel more comfortable carrying your firearm. Stick around to the end of the video to see Mollie test out some of the popular concealed carry firearms, and find out which one she enjoys most! What’s your preference for concealed carry firearms? What other considerations should Mollie look into?