Jellydinosaur

Today we open a tiny Optimus Prime. I purchased this along with several other figures at big lots several years ago. I was not expecting much looking at the figure through the bubble but I really like this tiny Optimus. The articulation is very limited and once you remove the plastic filler under the head his head is a bit floppy. The transformation is simple and the instructions are easy to follow. Make sure you put the head down in to the cab before sliding the shoulders to the back of the cab so they sit right. I would have preferred his classic gun instead of the sword but it is not that important. This Optimus will probably be displayed on my desk. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open some Detective Conan lottery items. I ran across the tie tug kiss image and I liked it a lot. I searched Mercari Japan through buyee and found a few listings with the image i was after but I decided to go with a listing that had a collection of various Conan lottery items. The two little conan plushies are very simple but they do not have any vinyl on them so they are already better than a lot of plush items out there. The metal badge is much larger than I expected. I need to find a way to display my can badges. The Acrylic stand looks great and displays well. The large panel plugs in to the smaller panel with slits. The fit is nice and tight so it will not be falling out or over. We can not have a lottery video without a clear file to finish things off. I am very happy with this lot of Conan items. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Chun Li. Another fine Street fighter statue from Kotobukiya. Kotobukiya statues in general are nice to look at. One thing I have noticed about all of the street figher statues is that the base does not stay on snug like all of the other koto statues. Most of the other lines tend to be very snug on their base. Chun Li looks great doing a strong high kick. Just like the rest she includes two transparent logo card options for the base. I think this is the last of the Street Fighter statues I still had sealed. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Xenomorph Runner. This xeno has some decent articulation. The tail is solid and moves on a swivel but the pose of the tail is pretty great faced forward or back. The dog does not have any articulation but the sculpt is pretty good. I think he might fit right in with a GI JOE classified Mutt & Junkyard figure. The facehugger is the same facehugger we received from the previous sets that can be wrapped around the neck of a humanoid figure. I hope Lanard continues these sets. I really like them and the prices on them in store are great. I hope you enjoyed the video. Thank you for watching. Take it easy. Music from AVP Arcade - Cinematic music.

Today we open more bootleg Conan stuff. This time we have some really nice acrylic keychains and 50 random stickers. The keychains are about 4mm thick and the print job is really nicely done. Both sides of the acrylic were protected with a plastic film. The images appear to be part of a set of UFO claw machine art. They key chain part itself is also nice and sturdy. I like these little key chains a lot. Next up we have a bag of stickers. I am not crazy about the stickers with text on them but they are all well printed and cut. I am not sure what I am going to do with the stickers but I will find a use for them. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we unbox a 3 3/4 H.I.S.S. tank. This package includes the H.I.S.S. tank and driver. I am glad Hasbro included a sticker sheet with this tank. The stickers all look great and were easy to place if you do it before assembling the tank. The assembly was simple. The track part snaps in to the body. The canopy did not seem to fit in to the hinge very well but it snaps in tightly in to the nose of the vehicle. The gunner seat piece is keyed to slip in to the tank one way. Once the gunner seat is in the tank it can be rotated 360 degrees. The keyed teeth keep it in place fairly well.

Today we open an Egg mobile. The Egg Mobile includes parts to recreate various boss fights in Sonic 2. You can mix and match some parts and make your own combinations. By pressing down on the window Eggman is launched out of his seat and the various parts that plug in will eject from the Egg Mobile. A display stand is included. Attaching the base to the Egg Mobile was a bit tough but once it was in it was solid. There are so many big chunky parts included in this playset. In my opinion this is the best sonic playset Jakks has release so far. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Skullgrin. I picked this up on Kidswhs.com. The box was pretty rough and it was one of the windowless boxes. I could see a lot of these missing the horns on the head. They are fairly loose on my figure and fell off a few times while I was handling the figure. With the box having an open front with no plastic window some of those horns are no doubt lost before they hit the shelves. The horns and sword guns are made from a rubbery material. The rest of the figure is hard plastic. The transformation was fairly easy. I think the Robot mode is the highlight of this toy. The tank carrier mode is ok though. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Battle android Trooper. I picked this up from Kidswhs.com for 12.99. For the price I am pretty happy with the figure. He does seem to have an issue with his right hip. The leg does not seem to sit in the socket right. I will have to look in to that. The figure includes a backpack where you can plug in his extra hand accessories. There is a flame thrower, Laser and a claw hand. There is also a small pistol that can be put in to his hands or the holster on his thigh. There are two heads and two chest plates one damaged and one normal. The articulation is pretty good on this figure. The neck has a noticeably wider range of motion and the arms have swivel and hinges joints that attach to butterfly joints.

Today we open a Green Rogue. I have opened the classic carded Rogue previously. The face on this Green Rogue is a huge improvement. If I can get my hands on another classic Rogue that is painted properly I would swap the head on that with this Green rogue in a heartbeat. The rest of the body is fine. If you like this version of rogue or want to improve another version in the same scale the head on Green Rogue alone is worth it. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open my first order from Kids Warehouse. I learned about this website from a recent live stream with @CollectorExpress and @GeekFusion_TV . Kidswhs.com has prices similar to ollies and ross but they ship. I picked up four figures. The Transformer Skullgrin has a pretty rough box as you can see. The Transformer was fine inside the box. The rest of the boxes were in pretty good shape. I will list the prices for the items below. I will be opening these on the channel soon. Please look forward to it. I hope you enjoyed the video. Thank you for watching. Take it easy. Skullgrin - $10.99 Rogue - $9.99 Terror Claw Skeletor - $8.99 Crimson Bat - $12.99 Shipping $9.39

Today we open a Hordak. These Classics figures are really well made. Hordak comes with a pet Dragon, a staff and a very detailed and improved crossbow. The Armor, cape and mantle can be removed by popping off Hordak's head. The armor uses some simple plugs to snap together. It is made of rubbery material so it is unlikely you can break it. The little dragon can be clipped on to Hordak's Wrists. It is a tight fit but at least it will stay on. Hordak can hold the staff in both hands. The head piece on the staff is tilted at an angle which gives it a much more interesting look than if it were just flat. The articulation on this figure is great like most of the classics. I am really starting to regret selling off most of my Classics figures. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open another Android 18. This is version 2 of #18 from the Gals figure line. As usual with this line the sculpt is very exaggerated. The base attaches to one foot with two pegs. The figure is nice and stable. She has one bracelet that is loose and can hang loose on her right wrist. The hair seems to have a bit of a sparkle to it. I do not remember the other version having this hair sparkle. Thank you for watching. Take it easy.

Today we open a Goldberg. Goldberg gets the Ram Man Gimmick. Not a bad fit considering his finisher. The armor straps on with pegs in the back of the armor to hold it together. It is easy to remove. The helmet was a bit misshapen but with him wearing it i expect it will work itself out. I think my Goldberg figure might be a but cross eyed. You can expect the usual articulation from this line. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we assemble an "Intelligent Vehicle Robot". This little Fuchikoma set is very well done. The instructions are not perfect but I got through the build. Maybe it has already been done in other legit or bootleg sets but the use of the mini figure helmets was very clever. I am very happy with the build and design. The bricks are excellent quality and snap together solid. I picked up this set on Temu for $9. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open an AI plush. I found this plush on Japanese Mercari and ordered it through Buyee.jp. The plush is nice and soft with dangly legs. She sits up fine. The eyes are embroidered not vinyl. The hair is actually sewn together giving it more thickness than most plush with cut hair. I am very pleased with this AI plush. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Inami statue. In a rare moment of not punching the nearest male Inami is in uniform holding the Wagnaria menu. This prize statue is a bit shiny but does not look bad for the usual UFO claw machine prizes. The base was easy to attach and the menu fits in snug. It was more difficult to pull the plastic tray from the box. I hope you enjoyed the video. Thank you for watching. Take it easy.

I stopped by an estate sale and found some treasure. There were a lot of hotwheels new on the cards but I just picked up the three with Floppy discs in them. There were a few comic book price guides and lots of books about antique and collectibles. There were transformers from various eras. I picked up the green Acid Storm jet and I just recently opened the Thunder Cracker version that uses the same body. I also picked up a Soundwave Mp3 Player. I have Mario Land for the original Game boy now too. The first tin of yugioh seemed legit but the second tin was mostly fake cards. There was a lot to look at and some stuff I should have grabbed but I am pretty happy with what I got.

Today we open a Cobra. This Cobra trooper comes with four accessories. There is the obvious rifle and knife and then you have his removable chest rig and helmet. The helmet stays on fairly well. I think I would have preferred a permanent helmet but it is fine. The chest rig is rubbery material. There is a hole and peg under the front silver buckle. The knife can be slipped in to the clips his right leg. The articulation on this figure is better than the classic 80s figures but not by all that much. The head moves side to side but there is not much range at all up and down. The shoulders are a hinged swivel. The elbow has another swivel hinge and the wrist is a swivel. The chest has a break and appears to be on a ball joint. Turning is no problem but the up and down or forward and back range is limited. At the hips you have the classic articulation without the O-ring and open crotch. The knees are double hinged and finally the feet have a hing and peg in to the ankle allowing them to swivel side to side. I think the cobra symbol on the chest could have been a bit larger on this figure but it is well printed. I would have preferred the original O-Ring figures in this packaging but these updated figures are not bad. They are certainly a step above the similar size Marvel Universe figures. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Spider-Woman. Her costume is much more shiny than I recall it being in the comics. She comes with both a masked and an unmasked face. There is a spot under the base where you can store the face not being used. The foot pegs fit nice and tight in to the base. It is probably best to remove her head to push her in to the base to avoid damaging her hair. I like the spider web base. To replace the face you need to remove the head. The front hair part fits on the the shoulder fairly tight so you might be able to remove it with the head attached but you wont be able to get it back on without removing the head. I hope you enjoyed the video. Thank you for watching.

Today we open a Man-At-Arms. The bubble on the package has some cool Snake Men themed serpent scales on it. I almost hate to open it but where is the fun in that? Serpent Claw Man-At-Arms comes with his usual chest armor and mace except gray. Then some armor parts for his right arm and right leg. His head seemed very loose. Much looser than i recall the earlier figures being. The Serpent Claw slips on to his left hand easily and looks great. It would easily work as a grappling hook with some string attached. If the shin armor seems loose slide it down against the top of his boot. His shin is a bit thicker above the boot and the armor stays in place very well down there. If you wedge the orange armor on the arm under the silver shoulder armor it keeps both pieces together as well. I really like this figure a lot. I want to get snake mountain from this line. I hope I can pick it up somewhere before it is sold out. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open and assemble a Keeppley Ran. This is the first Keeppley block set I have assembled. I am very pleased with the quality of the blocks, the instructions and the final result. All parts were present and there were a few left over pieces. The figure itself looks much nicer than I expected even though it is clearly pictured on the box. The pieces with printing on them are quality. I have the other three from this set and I am looking forward to putting them together. There are several more Conan sets from Keeppley. I plan to pick those up as well when I am able. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open and assemble a Keeppley Ran. This is the first Keeppley block set I have assembled. I am very pleased with the quality of the blocks, the instructions and the final result. All parts were present and there were a few left over pieces. The figure itself looks much nicer than I expected even though it is clearly pictured on the box. The pieces with printing on them are quality. I have the other three from this set and I am looking forward to putting them together. There are several more Conan sets from Keeppley. I plan to pick those up as well when I am able. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we unbox a Soldier machine white shark. The conversion steps are on the back of the card. It is a fairly simple process though I did make a mistake. I did not catch it while I was recording but the head is on a platform that you need to slide up to the top of the shark head and then down inside the head when converting back to shark. Overall this is a nice figure for what it is. The plastic is not really thin and cheap like many figures of this type. The articulation is poor but the robot mode and shark mode both look good. The gun included is pretty nice too. I am going to see if I can find the rest of these. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open some bootleg cards. I picked up this box on temu for $12.00. The cards are nicely printed and the card stock is nice and thick. The cards from the various rare sets all look pretty good. Unfortunately the reflective holo paper they put on top of the common cards is pretty scuffed up. Most of the art is not official but none of it looks terrible. I expect a lot of this art was downloaded and cropped to make these sets. I can enjoy it for what it is and I had fun opening the packs. I hope you enjoyed the video. Thank you for watching. Take it easy.