Enjoyed this channel? Join my Locals community for exclusive content at
3dprintgeneral.locals.com!
Bambu Lab 1 Month Later
In this video I take a look at my thoughts of the Bambu Lab X-1 Carbon after using it for a full month.
My initial very detailed video review of the X-1 Carbon: https://www.youtube.com/watch?v=NZBpbkLJXb8
More Info: https://bit.ly/3GA3WS6
Time Stamps:
Intro - 00:00
Cool Features - 1:22
Negative Issues - 6:16
Final Thoughts - 10:01
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
113
views
8K Elegoo Saturn 2 Review
In this video I take a look at the brand new Saturn 2 LCD SLA printer by Elegoo. It is currently for pre-order.
Find out more: https://www.elegoo.com/products/elegoo-saturn-2-8k-10-lcd-3d-printer-pre-order
Good SLA YouTube Channels:
3D Print Farm: https://www.youtube.com/channel/UC5k3TJL8ud4jh7863gjywPQ
3D Printing Pro: https://www.youtube.com/channel/UCbv2mDrRqXovPdahRyoCFhA
Uncle Jessy: https://www.youtube.com/c/UncleJessy
Let others know in the comments your favorite SLA YouTube channels
Parts Used (affiliate):
Isopropyl Alcohol: https://amzn.to/3tUKFFW
Elegoo Clear Green Resin: https://amzn.to/3HOUaMD
Wham Bam Slap Mat: https://whambam3d.com/products/slap-mat
Saturn 2 Flex Plate (I did not use this in this video): https://whambam3d.com/collections/fbs-for-resin/products/196-x-126-elegoo-saturn-v2
Files Used:
Air Jordan: https://www.thingiverse.com/thing:1313776/files
Vecna: https://cults3d.com/en/3d-model/art/vecna-bust-stranger-things
Chess Set: https://www.thingiverse.com/thing:2259892
Dragon Egg: https://www.thingiverse.com/thing:4305022
Elegoo Aliens: https://cults3d.com/en/3d-model/art/elegoo-aliens
Time Stamps:
Intro - 00:00
Unbox and Specs - 00:21
First Tests - 2:13
More Tests - 4:08
Clear Tests - 5:17
Final Thoughts - 7:19
Background Music by Joakim Karud http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
117
views
6 Tips to Reduce Delamination and Warping
In today's video we take a look at 6 ways you can reduce layer delamination and warping on your 3D prints.
Join FlexiSpot Member Day during 29-30th June 2022! Up to $100 OFF! https://bit.ly/3xV2fMf
FlexiSpot Pro Standing Desk- E5
https://bit.ly/3DrJNMx (US site)
https://bit.ly/3MU5iIP (CAN site)
#MyFlexiDesk #flexiblewfh
More in-depth videos on these solutions
Material Science: https://www.youtube.com/watch?v=noODm1A-O2w
Print ABS and ASA on an Open Printer: https://www.youtube.com/watch?v=eEOaA76WR0Q
Polymaker taught me all of this information! Check them out: http://polymaker.com/
Parts Used (Affiliate)
Polylite ABS: https://amzn.to/3jOMArd
Polylite ASA: https://bit.ly/3Jvz8lN
Magigoo Original: https://amzn.to/3F0bQ4x
Time Stamps:
Intro - 00:00
Use an Enclosure - 00:34
Print Slow - 2:45
Print Hot - 3:47
Sponsor - 4:46
Use Larger Nozzle - 6:15
Larger Layer Heights - 7:24
Use Magigoo - 7:58
Notes About Overhangs - 9:58
Background music by Joakim Karud http://soundcloud.com/joakimkarud​
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
72
views
Mingda Magician Pro 3D Printer Review
In this video, I take a look at the very large 400mm cubed build volume Mingda Magician Pro.
Find out more and buy (affiliate)
Official store: https://bit.ly/3xihLjD
Enter this coupon code to save more! ZFTPQYD0A4
Little more expensive on Amazon: https://amzn.to/3aF3XrM
Mingda Magician X Review: https://www.youtube.com/watch?v=UTwYBpPAg9I
Files Used:
Benchy - https://www.thingiverse.com/thing:763622
Twisted Gear Lamp/Vase: https://www.thingiverse.com/thing:31722/files
Spiderman: https://www.thingiverse.com/thing:5378838/files
Bracelet: https://www.thingiverse.com/thing:8966/files
Parts Used (affiliate)
Polylite PLA: https://bit.ly/3tQETFs
PolyFlex TPU 95: https://bit.ly/3qZLrwQ
Time Stamps:
Intro - 00:00
Unbox and Specs - 00:22
First Test Prints - 1:45
TPU Test Prints - 4:06
Pros and Cons - 5:44
Final Thoughts - 8:07
Background music by Joakim Karud http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
86
views
1
comment
Bambu Lab X-1 Carbon First Look
Longest video to date and we are looking at a revolutionary new printer - the X-1 Carbon by Bambu Lab. There is a lot of cool things to cover.
More Info: https://bit.ly/3GA3WS6
Kickstarter: https://www.kickstarter.com/projects/bambulab/bambu-lab-x1-corexy-color-3d-printer-with-lidar-and-ai
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Files Used:
Torture Toaster: https://www.thingiverse.com/thing:4803370
Drone Arm: https://www.thingiverse.com/thing:987951
Camo F14: https://www.thingiverse.com/thing:5247162
American Flag: https://www.thingiverse.com/thing:10273/files
Wall Hooks: https://www.thingiverse.com/thing:4901055
Oscar Award: https://www.thingiverse.com/thing:1454337
Terminator: https://www.thingiverse.com/thing:438789
Sauron Dice Tower: https://www.thingiverse.com/thing:3026187
Gollum bust: https://www.thingiverse.com/thing:3781348
LOTR Ring: https://www.thingiverse.com/thing:3715894/files
Sauron Bust: https://www.thingiverse.com/thing:4206897
Parts Used (affiliate)
Polylite PLA: https://bit.ly/3tQETFs
Poyterra PLA: https://bit.ly/3tQETFs
Polydissolve S1: https://bit.ly/3MHscDy
Polylite ASA: https://bit.ly/3Jvz8lN
Time Stamps
Intro - 00:00
Specs - 2:22
First Test Prints - 8:29
Slicing my Parts - 11:33
Multi Color Fun - 17:23
Carbon Fiber Prints - 21:30
Multi Material - 24:14
ABS and ASA - 27:22
Notes and Ludicrous Mode - 30:50
Hardware Complaints - 35:13
Software Issues - 37:08
Final Thoughts - 39:36
Background music by Joakim Karud http://soundcloud.com/joakimkarud
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
224
views
1
comment
Creality Sermoon V1 Pro Review and Creality Cloud Issues
In this video I take a look at the new Creality Sermoon V1 Pro and also go over the Creality Cloud stolen file issue.
More info: https://www.creality.com/products/creality-sermoon-v1-v1-pro-3d-printer
Both models discounted on Amazon (affiliate): https://amzn.to/3wS31b6
Parts Used (affiliate)
Polylite PLA: https://bit.ly/3tQETFs
Polylite ASA: https://bit.ly/3Jvz8lN
Files Used:
Benchy - https://www.thingiverse.com/thing:763622
Torture Toaster: https://www.thingiverse.com/thing:4803370
DD17 and 43.1 - Search online
Time Stamps:
Intro - 00:00
Unbox and Specs - 1:05
Intial Setup and Tests - 2:31
Slicing PLA Prints - 3:29
ABS and ASA - 4:52
Cloud Printing - 6:42
Pros and Cons - 7:29
Final Thoughts - 8:46
Background music by Joakim Karud http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
79
views
Sovol SV04 IDEX Review
In this video I take a look at the Sovol SV04 printer that has independently moving extruders and hotends.
More info: https://sovol3d.com/products/sv04
Amazon ($530 after discount. Affiliate): https://amzn.to/3GiSE4C
Products used (affiliates)
Polylite PLA: https://bit.ly/3tQETFs
Polylite PETG: https://bit.ly/3s6tlgf
PolySupport: https://bit.ly/3LET336
Polymax PLA: https://bit.ly/3gGJVx7
PolyDissolve S1: https://bit.ly/3MHscDy
Files Used:
Spring: https://www.thingiverse.com/thing:487880
Dissolvable Support Gearbox: https://www.thingiverse.com/thing:12342
Hoffman Lower - Search for Hoffman Tactical
Time Stamps:
Intro - 00:00
Unbox and Specs - 00:23
Setup and Tests - 1:57
Multi Material Fun - 4:16
Dissolvable Supports - 5:32
Pros and Cons - 8:02
Final Thoughts - 9:33
Background music by Joakim Karud http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
162
views
1
comment
Elegoo Neptune 2S Review and GIVEAWAY
In this review, I check out the Elegoo Neptune 2S and they are kind enough to give one away! And they just reduced the price to $230 - not $250 like I said!
More info on printer: https://www.elegoo.com/products/neptune2s-fdm-printer
Buy on Amazon (affiliate): https://amzn.to/3MIdE73
Enter Giveaway: https://bit.ly/389sNPJ
Giveaway winner will be chosen the 25th of June - not the 21st.
Parts used:
Polylite PLA: https://bit.ly/3tQETFs
My review of Elegoo Neptune 2: https://www.youtube.com/watch?v=OOuYDxVR280
Time Stamps:
Intro - 00:00
Specs and Build - 00:25
Test Prints - 1:35
Final Thoughts and Giveaway - 2:47
Background music by Joakim Karud http://soundcloud.com/joakimkarud​
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
54
views
Build Plates and Adhesion Products
In this video I go over every type of build plate that I use and let you know which I like the most. I also go over some adhesion products that really help to make sure parts stick and do not warp.
Video sponsored by Xreart - Technology as Artwork (affiliate links)
Visit their site: https://bit.ly/3wBc5B1
iPhone 1st Gen: https://bit.ly/3sIihpV
Use the links above or enter the code "3DPRINTGENERAL" at checkout so they know I sent you!
Videos Mentioned
PID Tune Your Buildplate: https://www.youtube.com/watch?v=7mj47VjlavQ
Fulament Review: https://www.youtube.com/watch?v=goLE-KBuJas
3D Que Automation: https://www.youtube.com/watch?v=Dt3_TPhtFVs
Products Mentioned (Amazon links are affiliate)
Aquanet Hair Spray: https://amzn.to/37Vt3BO
Fulament PEI: https://amzn.to/3yLf7pg
TH3D PEI: https://bit.ly/38F4NEl
CTRL Pew PEI: https://bit.ly/3G4BXJV
Wham Bam Flexi Plates: https://bit.ly/3FXBTeY
Wham Bam Resin Flex: https://bit.ly/3yMOLTO
3D Que: https://www.3dque.com/
Magigoo Original: https://amzn.to/3Psq5Wu
Magigoo PC: https://amzn.to/3a9VcGa
Magigoo Nylon: https://amzn.to/3yLeXya
Time Stamps:
Intro - 00:00
Sponsorship - 00:42
Glass - 2:36
PEI - 4:55
PEX - 7:45
PC - 8:59
Bonus Plates - 9:40
Adhesion Products - 11:35
Final Thoughts - 13:32
Background music by Joakim Karud http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
93
views
Testing Cura Tree Supports
In this video I attempt to dial in tree supports. Please leave any comments if you have working tree supports and have tips for others.
Happy FlexiSpot Day! Up to $200 OFF during 25th-31st May 2022! Once a year only! https://bit.ly/3FBLuId
FlexiSpot Pro Standing Desk (E3/E5) https://bit.ly/3DrJNMx
FlexiSpot Soutien Ergonomic Office Chair https://bit.ly/3Jy27Gp
#flexiblewfh #MyFlexiDesk #flexispot
Videos Mentioned:
Detailed Cura Support Settings: https://www.youtube.com/watch?v=7TsJOvxQk-c
How to Avoid Needing Support Material: https://www.youtube.com/watch?v=nP_t-DVtqMw
Time Stamps:
Intro - 00:00
Sponsorship - 2:41
First Tree Tests - 4:13
Larger Tree Tests - 10:16
Final Thoughts - 16:17
Background music by Joakim Karud http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
119
views
Cura Support Tips #shorts
Full detailed video here: https://www.youtube.com/watch?v=7TsJOvxQk-c
48
views
QIDI I-Fast Dual Extruder Actively Heated 3D Printer
This is my longest review to date - and it is also on the most expensive printer I have checked out on this channel.
Find out more: https://bit.ly/3Fa2aqb
On Amazon (more expensive and affiliate): https://amzn.to/3y9wtvF
Material Used (affiliate) :
Polyterra PLA: https://bit.ly/3qPrUBY
Polylite PLA: https://bit.ly/3tQETFs
Polylite PETG: https://bit.ly/3s6tlgf
PolySupport: https://bit.ly/3LET336
PolyDissolve S1: https://bit.ly/3MHscDy
Polymide CoPA: https://bit.ly/368KBJI
Polylite ASA: https://bit.ly/3Jvz8lN
Files Used:
Squirtle: https://www.thingiverse.com/thing:1834292
Spring: https://www.thingiverse.com/thing:487880
Dissolvable Support Gearbox: https://www.thingiverse.com/thing:12342
DD43.1 - Search online
Hoffman Lower - Search for Hoffman Tactical
My review of the QIDI X-CF Pro: https://www.youtube.com/watch?v=jOwbNmE_1RU
Background music by Joakim Karud http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
136
views
Variable Line Width with Cura 5.0
Ultimaker just released their new Cura 5.0 and its best feature is including variable line width for more accurate and strong parts.
Download Cura 5.0 Beta: https://ultimaker.com/learn/ultimaker-cura-5-0-beta-release-notes
Watch their Showcase Video: https://www.youtube.com/watch?v=kRj7pR4OkQA
Background music by Joakim Karud http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
64
views
Talking Firmware and Printers with TH3D
Timothy at TH3D is extremely knowledgeable on firmware and printers overall, and he is a great resource for information. I live stream with him in order to get more familiar with everything he works on while we take questions from the community.
Find out more about TH3D
Website: https://www.th3dstudio.com/
Facebook: https://www.facebook.com/th3dstudio
Twitter: https://twitter.com/TH3DStudio
126
views
Live Interview with Hoffman Tactical
Hoffman Tactical has been doin his own thing - designing and printing unique gun designs and testing out different material types. Join us as we chat about it all and take your questions live on air.
Follow Hoffman Tactical
YouTube: https://www.youtube.com/c/HoffmanTactical
Instagram: https://www.instagram.com/hoffmantactical/
Twitter: https://twitter.com/HoffmanTactical
654
views
Designing for 3D Printing Q&A Live Stream 2
Kong Chho is the main designer for this channel and he will be taking all questions about designing for 3D printing while modelling Kirby from the new Kirby game as a Benchy. He is an expert with both CAD designing on Fusion 360 as well as an artist on Z-Brush. Ask him anything you'd like!
Follow Kong
Twitter: https://twitter.com/ChhoKong
Instagram: https://www.instagram.com/kongchho/
You can see his amazing designs over at our Patreon, where you can get access to them all for just $1: https://www.patreon.com/3dprintgeneral
44
views
Print with GOLD Nozzles
Step up your game and print with a GOLD nozzle. Only available here: https://3dprintgeneral.com/gold/
Happy April
My video on diamond tip nozzles: https://www.youtube.com/watch?v=n74tNiOkZ28
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
61
views
Full Auto Rubber Band Gun
I check out this awesome full auto rubber band gun designed by Props 3D.
Visit his YouTube: https://www.youtube.com/c/Props3D
Build Guide: https://www.youtube.com/watch?v=xnxla2OM4N0
Design Files: https://www.thingiverse.com/thing:4649407
Video sponsor is FlexiSpot!
Visit their site (affiliate): https://share.flexispot.com/x/B14z7X
FlexiSpot Adjustable Standing Desk Pro Series https://www.flexispot.com/electric-height-adjustable-standing-desk-dual-motor-economical-option-ec3-ec4
#1: if the order amount is less than $500, then use "3Dprint" to get 10% OFF
#2: if the order amount is $500 or more, then use "3Dprint2" to get $50 OFF
Offer only valid through April 6th!
Parts used (affiliate):
Polylite PLA: https://bit.ly/3tQETFs
Army beige was actually Polyterra PLA: https://bit.ly/3qPrUBY
Rubber bands I shot: https://amzn.to/3Lql79H
Loom bands (I only used one so you might not need): https://amzn.to/3uMNQPE
Mixed sized metal rods I used (you may find cheaper, just need 3mm): https://amzn.to/3tQEz9K
M3 screws assorted sizes: https://amzn.to/3x61bFx
Taps (probably not needed): https://amzn.to/36Vugs2
Other video mentioned:
Cura Support Settings: https://www.youtube.com/watch?v=7TsJOvxQk-c
Time Stamps:
Intro - 00:00
Sponsorship - 00:54
Props3D - 2:28
Building and Tips - 3:33
Outro - 10:48
Beginning and end music by Print Shoot Repeat: https://www.youtube.com/c/PrintShootRepeat
Middle background music by Joakim Karud: http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
218
views
Full Auto Rubber Band Gun #shorts
Design by Props3D: https://www.youtube.com/channel/UCYW3RFB3QKm9_TkX1yuNzVg
Thingiverse: https://www.thingiverse.com/thing:4649407
118
views
Ready for WW3 #shorts
Watch the full 3011 video here: https://www.youtube.com/watch?v=qt3aeNbM-2k
54
views
3D Printing with DIAMOND Tip Nozzles
In this video - I take a look at diamond tip nozzles by DiamondBack. This is supposed to be the most wear resistant nozzle option out there.
Find out more: https://www.championx.com/products-and-solutions/drilling-technologies/diamondback-nozzles/
Buy on Amazon - actually $95 not $100 (affiliate): https://amzn.to/3wkNgL0
Material Used (affiliate):
PA6-CF: https://bit.ly/3whrt75
PA6-GF: https://bit.ly/3KPE2KZ
PLA-CF: https://bit.ly/34O18Cr
CoPA: https://bit.ly/368KBJI
Ruby tip videos shown:
The Olsson Ruby - The Ferrari of 3D Printing Nozzles - Review: https://www.youtube.com/watch?v=5qUngZupKcQ
Is the Olsson Ruby Nozzle The Best For Your 3D Printer? - https://www.youtube.com/watch?v=9CLuzMc9U64
My video on the importance of replacing nozzles: https://www.youtube.com/watch?v=aR2Dg_9aU6Y
Timestamps:
Intro - 00:00
About Nozzle Types - 00:21
Showing Why Diamond is Great - 2:34
Testing the Nozzle - 6:27
Final Thoughts - 10:24
Background music by Joakim Karud http://soundcloud.com/joakimkarud
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Grab the 2022 Edition of my 3D Printing Failures book: https://amzn.to/3F0xXcb
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY
58
views
Do Patents Belong in 3D Printing? - A Discussion of IP in the Maker Community
It is a bit different livestream than we normally have on this channel, but today I have on Matthew from Design Prototype Test to discuss whether or not patents have their place in the maker community.
Make sure to follow Matthew here: https://www.youtube.com/c/DesignPrototypeTest
The conversation with Ivan the Troll that sparked this discussion: https://www.youtube.com/watch?v=v1BA4XZPcTg
140
views