Kubota BX Engine Cowling Removal
Kubota BX Engine Cowling Removal
I needed to work on my Kubota BX25D and the best way would be to remove the engine cowling.
Here is a link to the hood removal: https://youtu.be/uwJieqiFFPI
#diy
#honda
#hondarecon
#atv
#welding
#relaxing
#farming
#solar
#diysolar
#pontoonboat
#livewell
#leather
#tandy
#diyleather
#knifemaking
#woodcraft
#leathercraft
#mudmixer
#diyconcrete
#concrete
#24hoursoflemons
#kubota
#kubotarepairs
#ufo
#uap
#laserpecker
#laserengraving
#harborfreight
#calm
#chill
#satisfying
#nsfw
#woodworking
#woodturning
#beginnerwoodturing
#hobbies
#crafts
#retirement
#retirmentplanning
#woodprojects
#woodturningprojects
#simplewoodprojects
#vw
#vwtransporter
#vwbus
#gmcsafari
#chevyastro
#beginnerwoodworking
#virginvoyages
#cleetusmcfarland
#vicegripgarage
#polebarngarage
#marlingbaits
#superfastmatt
#musti1
#watchweswork
#thefatelectrician
#robotcantina
#thewhyfiles
#jimrodgerswood
#dieselcreek
#nononsenseknowhow
#hotwife
8
views
1997 GMC Safari Crank No Start When Cold - Full Video: https://youtu.be/49XkxwQO_jo
My 1997 GMC Safari will crank but not start in cold weather. Since it just started getting cold, it's time to see if we can figure this out.
Since we had to wait for parts and cold weather, it took a couple of weeks to make this video. Which is why I kept repeating the myself. Sorry.
I also kept forgetting what I paid for the parts so here is the information:
Crankshaft Position Sensor, which I kept calling a "crankshaft positioning sensor": $11.99
Ignition Coil: $18.70
Both were purchased from Amazon (Not a Sponsor)
The photo of the 1997 GMC Safari is from an ad in AutoTrader
4
views
Ingersoll Rand Angle Die Grinder (301B) - Didn't Go Well - Full Video: https://youtu.be/ig9mXoYXk3c
Right out of the box it had a problem. I even tried to adjust and repair it.
Full Video: https://youtu.be/ig9mXoYXk3c
2
views
70 Year old table saw stopped turning - Full Video: https://youtu.be/S-GvrbdjwPo
This table saw belonged to my wife's grandfather, so keeping it running is important to us.
The best manufacturing date I could find for this model was 1951.
This is not a "How To" video, just me working on the table saw.
Full Video: https://youtu.be/S-GvrbdjwPo
2
views
Gasoline (2 Stroke) Powered Tee Post Driver - Full Video: https://youtu.be/pNYTbd8JCXQ
I need to run a bunch of fencing so I decided to get a gas powered tee post driver.
Here is what I got: XtremepowerUS 52cc Gas-Powered T Post Driver Fence Post Driver Gasoline Piling 2-Stroke Engine EPA Certificated w/Storage Case.
UPDATE: I heard back the customer service and was advised to use 30 weight oil in the gear case.
Full Video: https://youtu.be/pNYTbd8JCXQ
2
views
GMC Safari / Chevy Astro Van Sticking Sliding Door - Full Video: https://youtu.be/ggql0ASnZMI
Ever since I bought this van, I've had to open the sliding door with 2 hands. As you can image this is very annoying when you're carrying something.
The first thing I did was to inspect for broken parts or parts with excessive wear. Not finding anything obvious, I starting spraying everything with a lubricant.
Much to my surprise, this solved the problem.
Full Video: https://youtu.be/ggql0ASnZMI
2
views
Kubota BX Hood Removal
Kubota BX Hood Removal
I needed to work on my Kubota BX25D and it would be easier if I took the hood all the way off.
#diy
#honda
#hondarecon
#atv
#welding
#relaxing
#farming
#solar
#diysolar
#pontoonboat
#livewell
#leather
#tandy
#diyleather
#knifemaking
#woodcraft
#leathercraft
#mudmixer
#diyconcrete
#concrete
#24hoursoflemons
#kubota
#kubotarepairs
#ufo
#uap
#laserpecker
#laserengraving
#harborfreight
#calm
#chill
#satisfying
#nsfw
#woodworking
#woodturning
#beginnerwoodturing
#hobbies
#crafts
#retirement
#retirmentplanning
#woodprojects
#woodturningprojects
#simplewoodprojects
#vw
#vwtransporter
#vwbus
#gmcsafari
#chevyastro
#beginnerwoodworking
#virginvoyages
#cleetusmcfarland
#vicegripgarage
#polebarngarage
#marlingbaits
#superfastmatt
#musti1
#watchweswork
#thefatelectrician
#robotcantina
#thewhyfiles
#jimrodgerswood
#dieselcreek
#nononsenseknowhow
#hotwife
27
views
John Deere 5075E Running Rough / Surging - Full Video: https://youtu.be/SXDKK0PaIVY
My John Deere 5075E Starting running rough, surging and had low power.
My first thoughts was the fuel Filter was clogged. Turns out that both had problems.
I cleaned the in-tank filter and replaced the main filter.
Full Video: https://youtu.be/SXDKK0PaIVY
14
views
GMC Safari / Chevy Astro Van Exhaust Leak Repair - Full Video: https://youtu.be/0QSt8uyxamY
While looking for a noise that I thought was an rear axle bearing, I found a pretty good exhaust leak.
Full Video: https://youtu.be/0QSt8uyxamY
13
views
Mercury Force 40 Trim Relays and Wiring - Full Video: https://youtu.be/xRkhTGQhdeA
Mercury Force 40 Trim Relays and Wiring.
Full Video: https://youtu.be/xRkhTGQhdeA
12
views
Delta 46-460 Costs, Unboxing and Review - Full Video: https://youtu.be/n0v1BG1DbRA
Wood Lathe Selection Process from a Beginner
Full Video: https://youtu.be/n0v1BG1DbRA
The new lathe and accessories have arrived. It's now time to open all the boxes and set it up.
Here is the list of additional equipment I purchased:
Delta 46-460 Lathe - $660
Chuck - $150
Drill Chuck - $33
Legs - $186
Tools - $175
Face Shield - $29
Center Finder - $7
CA Glue - $11
Forstner Bit Set - $60
Forstner Bit Extension - $15
Total - $1,326
13
views
2023 Galentin's Party Sticker Game - They Let Me Play!!!!!
Well, they let me play the next day.
While these stickers didn't stick to clothes, they really stuck to our floor.
A few seconds with a blow dryer and they came right up.
15
views
Kubota BX Battery Location and Removal
Kubota BX Battery Location and Removal
I have a BX25D and on the first day I had to jump start it so I had to figure out where the BX25 Battery was and how to remove it.
#diy
#honda
#hondarecon
#atv
#welding
#relaxing
#farming
#solar
#diysolar
#pontoonboat
#livewell
#leather
#tandy
#diyleather
#knifemaking
#woodcraft
#leathercraft
#mudmixer
#diyconcrete
#concrete
#24hoursoflemons
#kubota
#kubotarepairs
#ufo
#uap
#laserpecker
#laserengraving
#harborfreight
#calm
#chill
#satisfying
#nsfw
#woodworking
#woodturning
#beginnerwoodturing
#hobbies
#crafts
#retirement
#retirmentplanning
#woodprojects
#woodturningprojects
#simplewoodprojects
#vw
#vwtransporter
#vwbus
#gmcsafari
#chevyastro
#beginnerwoodworking
#virginvoyages
#cleetusmcfarland
#vicegripgarage
#polebarngarage
#marlingbaits
#superfastmatt
#musti1
#watchweswork
#thefatelectrician
#robotcantina
#thewhyfiles
#jimrodgerswood
#dieselcreek
#nononsenseknowhow
#hotwife
18
views
Using a Needle Scaler to Clean a Mower Deck - Full Video: https://youtu.be/G5vLKkRkaMw
I was pretty busy last year and I didn't keep up on my riding mower maintenance. This year I did a full service and was in for a surprise when I inspected the mower deck.
It was so bad I decided to try out my new needle scaler and so if it would work.
Full Video: https://youtu.be/G5vLKkRkaMw
21
views
Outboard Motor Trim Relays (Mercury Force 40) - Full Video: https://youtu.be/xRkhTGQhdeA
Just replace both!
Full Video: https://youtu.be/xRkhTGQhdeA
16
views
DR-675 String Trimmer Won't Start - Full Video: https://youtu.be/M3mAr8H9U_I
A tenant left behind a number of these string trimmers. All of which are in very bad shape. This unit wouldn't start, but at least all the pieces are there.
Full Video:
https://youtu.be/M3mAr8H9U_I
17
views
How Does a Hudson Valve Work and Fail - Full Video: https://youtu.be/4uScr7nEZyo
Trying to get the greenhouses back on line and we are finding a number of the Hudson valves are not working.
So I took one apart and found the problem.
Full Video: https://youtu.be/4uScr7nEZyo
24
views
LaserPecker 2 - First Time Ever Using a Laser Engraver - Full Video: https://youtu.be/-MvjJsiKNNU
My wife bought me a laser engraver so I can make custom items and mark my turnings.
I've never used a laser engraver and this video captures my struggles in setting up the unit and making the first engraving.
LaserPecker 2 Full Video:
https://youtu.be/-MvjJsiKNNU
16
views
Kubota BX 25 Service
Kubota BX 25 Service
Our "New to Us" Kubota BX 25D needs to be serviced so today I'm doing the following:
Kubota BX25 Oil and Filter Change
Kubota BX25 Air Filter Change
Kubota BX25 Hydraulic Filter Change
Kubota BX25 Fuel Filter Change
#diy
#honda
#hondarecon
#atv
#welding
#relaxing
#farming
#solar
#diysolar
#pontoonboat
#livewell
#leather
#tandy
#diyleather
#knifemaking
#woodcraft
#leathercraft
#mudmixer
#diyconcrete
#concrete
#24hoursoflemons
#kubota
#kubotarepairs
#ufo
#uap
#laserpecker
#laserengraving
#harborfreight
#calm
#chill
#satisfying
#nsfw
#woodworking
#woodturning
#beginnerwoodturing
#hobbies
#crafts
#retirement
#retirmentplanning
#woodprojects
#woodturningprojects
#simplewoodprojects
#vw
#vwtransporter
#vwbus
#gmcsafari
#chevyastro
#beginnerwoodworking
#virginvoyages
#cleetusmcfarland
#vicegripgarage
#polebarngarage
#marlingbaits
#superfastmatt
#musti1
#watchweswork
#thefatelectrician
#robotcantina
#thewhyfiles
#jimrodgerswood
#dieselcreek
#nononsenseknowhow
#hotwife
31
views
JAL Flight 1628 - UFO Presented by Michael Schratt - Full Video: https://youtu.be/bG4Kx8CuyrY
I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none.
Full Video including Roswell Timeline: https://youtu.be/bG4Kx8CuyrY
Look for Michael Schratt books on Audible and at Amazon
Please visit MUFON.org & COMUFON.org
17
views
1976 Canary Island - UFO Presented by Michael Schratt - Full Video: https://youtu.be/bG4Kx8CuyrY
I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none.
Full Video with Roswell Timeline: https://youtu.be/bG4Kx8CuyrY
Look for Michael Schratt books on Audible and at Amazon
Please visit MUFON.org & COMUFON.org
19
views
My First 24 Hours of Lemons - Full Video: https://youtu.be/WvXNw5NxgiM
I wanted to try something new so I went on the 24 Hours Lemons site and posted a message that if a team needed help for the High Plains Raceway event, I would be available.
Full Video: https://youtu.be/WvXNw5NxgiM
15
views
Delta 46-460 Drive Belt Adjustment - Full Video:https://youtu.be/YDVV4OC_mus
There is not much to a wood lathe, but the drive belt latch does need to be adjusted sometimes. Usually just blowing the saw dust out is good enough.
Full Video: https://youtu.be/YDVV4OC_mus
10
views
Harbor Freight Sander Modification for Knife Making - Full Video: https://youtu.be/abkKx46WC28
This is how I modified my harbor freight belt sander so I can grind knives.
Full Video: https://youtu.be/abkKx46WC28
10
views