Complete Mobile Home Bathroom Remodel Pt 1

We completely pull out the old bathroom, the tub, floor, remodel it from the frame up. The bathroom ends up with an antique claw-foot bathtub... In a mobile home.

Any time you're completely replacing your floor, you don't want to run each layer of the floor the same way. To give the floor strength and avoid humps, you go across the joists. You also want to add two bys anywhere you have boards meeting and along the edge of the floor.

We cut the first piece of plywood in this video.

⏱️⏱️Chapters⏱️⏱️
00:00 Follow along with a handyman
00:25 Starting on a complete mobile home bathroom remodel
00:55 How to know when your mobile home floor has water damage
01:40 We'll pull up the floor, replace the particle board with plywood
01:55 Take pictures before you move things, that way you can get them back
02:30 Get to see what a cast-iron tub in a mobile home looks like
02:40 Cracks in the bathtub, why that happens
03:35 Hint, it's damaged floor under the tub
03:57 If you plan to keep the tub want to keep it sealed at the lip
04:30 We're replacing the tub with a cast iron tub
04:49 Lip of the tub, you want to keep sealed if you don't have a tub surround
05:20 If you were keeping the tub, you'd want to crawl under and disconnect everything
05:45 How he is taking the tub out
06:00 Pull off the kick plate in the front
07:22 Expect surprise visitors when you pull out a tub
08:19 Mobile home showerhead hanging
09:30 How to fix the hanging shower head in your mobile home
10:00 Not a mouse or rat visiting
10:20 Next try to get the flooring out
10:55 Knowing where the floor joists were he cut between them
11:30 Rock the floor back and forth trying to get it to come loose
12:45 Need to pull the staples from the vent loose
13:35 Can tell there were multiple leaks from the particle board
14:39 Cutting out the floor over by where the sink was
15:55 Cheat for mobile home flooring
18:18 All the places you want 2 bys to reinforce your flooring
18:38 Want to go across the floor joist not with them to get most floor strength
19:05 Back for another day; recap
20:00 Don't want to run plywood with the floor joists
21:50 Marking the first piece of plywood
23:30 Mark your vent and where the floor joists are, helps know where to put the screws
25:20 Don't guess, always double check your numbers
25:35 Tip for pre-drilling your holes
26:20 After you've marked, it's time to cut the plywood
27:09 What tools you can use to get the cuts made
28:22 Second cut, around the supply lines
30:35 Why he cut the board like that
31:22 Be an American not an American't

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: [email protected]
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#MobileHomeRepair, #MobileHomeImprovement, #BathroomRemodel