A $50 3D-Printed Prosthesis Compared to a $42,000 Myoelectric Prosthesis
I recently had the opportunity to work with a great guy named Jose Delgado, Jr., a 53-year old who was born without most of his left hand. I made a 3D printed prosthetic hand for Jose and, after using it for a while, I asked him to give me some honest feedback about how it compares to his more expensive myoelectric prosthesis. This is obviously not an "apples to apples" comparison in terms of the devices, but the real value of a prosthesis comes from how useful it is on a day-to-day basis, and that is the focus of the comparison here.
This 3D printed prosthesis is a completely mechanical design. There are a series of non-flexible cords running along the underside of each finger, connecting to a "tensioning block" on the top rear of the device (the "gauntlet"). The tension is caused by bending the wrist downward. With the wrist in its natural resting position, the fingers are extended, with a natural inward curve. When the wrist is bent 20-30 degrees downward, the non-flexible cords are pulled, causing the fingers and thumb to bend inwards. A second series of flexible cords run along the tops of the fingers, causing the fingers to return automatically when tension is released.
3D printers are coming down in price rapidly. As of today, you can get a self-assembly kit starting at around a few hundred dollars, and a fully assembled "prosumer" level printer is going for around $1000-$2000. In other words, this kind of technology is becoming very accessible, and it's opening up some very exciting possibilities!
A big thanks to the great work of those who contributed to the e-NABLE Hand prosthesis (aka the "Cyborg Beast"), including Jorge Zuniga, Frankie Flood, Ivan Owen, David Orgeman, and others in the e-NABLE community.
Music: "Inner Light" by Kevin MacLeod (Incompetech Royalty Free Music)
Intro and Closing Music: (Purple-Planet Royalty Free Music)
-
1:00
Digital Trends
3 years agoThis 3D-Printed House Blocks Viruses!
285K -
1:03
Digital Trends
3 years agoThe Mighty Buildings 3D-printed house!
3.38K -
2:57
KMTV
3 years agoLessons learned: 2008 recession compared to COVID-19 recession
8 -
1:38
WFTX
3 years agoLocal teacher makes 3D-printed mask straps
9 -
0:27
KTNV
4 years agoCat compared to Baby Yoda
22 -
0:43
WXYZ
4 years agoSunrise being compared to 'Devil Horns'
44 -
0:12
Viral Tab News
4 years agoStartup Offers 3D-Printed Equipment To COVID Hospitals
5 -
2:30
The Fumble
3 years agoDamian Lillard Finally Addresses Constantly Being Compared To Steph Curry
1422 -
0:29
KTNV
4 years agoFortnite compared to cocaine
67 -
1:05
KJRH
4 years agoCompared temperatures between Miami, Fl. and Tulsa, Okla.
6