SlideLocLLC

In 20yrs this has officially been my favorite system. Hopefully in several more it will officially be my longest successfully running reef display. www.Slide-Loc.com

Teaser video (audio on).

Slide-Loc LLC - Quick Release Lever Patent Pending - All Rights Reserved Slide-Loc's Quick Release (Lever). Slide-Loc LLC was formally founded in 2020 with an original intent to bring awareness to the owners local club in Minnesota “TCMAS” where he served as President. Following that time has used his +20yrs of hobby experience to release a steady stream of new patent pending products designed to push the envelope of usability and quality. Our latest evolution is to take on the meek and humble thumb screw... often a thorn for hobbyists... and replace it with what can only be described as a massive leap forward. The Patent Pending lever replaces the need for many nylon thumbscrews. Additionally alleviating the need for undersized bulkheads, complex machined lids, & better preserves the integrity of the gasket. Slide-Loc Patent Pending Quick Release: 1) Simple with fast release and re-attachment. 2) Quality 316 stainless steel & anodized aluminum construction. 3) Consistent attachment pressure. 4) Eliminates shear force on gaskets. 5) Eliminates thread binding from swelling of nylon screws. 6) Simple pressure adjustment. 7) Adjustment tool built in. 8) Comfortable on the hands. 9) Utilizes tensioning force (stretching) vs. the less mechanically sound torsion force (rotating). 10) More forgiving on lining up parts. 11) Able to retrofit existing equipment. The competition... Nylon thumbscrews serve their purpose. They don't rust underwater and they are cheap. They are challenged by: 1) Slow & often inconvenient to use in tight spaces. 2) Swells from moisture can create difficulty in turning. 3) Breakage from torque (head separating). 4) Phillips & flathead drive heads stripping screw. 5) Difficulty attaining sufficient clamping force for effective gasket compression. 6) Inconsistent clamping pressure. 7) Painful on fingertips. 8) Lining up the holes right... we've all been there.

Slide-Loc LLC - Quick Release Lever Patent Pending - All Rights Reserved Slide-Loc's Quick Release (Lever). Slide-Loc LLC was formally founded in 2020 with an original intent to bring awareness to the owners local club in Minnesota “TCMAS” where he served as President. Following that time has used his +20yrs of hobby experience to release a steady stream of new patent pending products designed to push the envelope of usability and quality. Our latest evolution is to take on the meek and humble thumb screw... often a thorn for hobbyists... and replace it with what can only be described as a massive leap forward. The Patent Pending lever replaces the need for many nylon thumbscrews. Additionally alleviating the need for undersized bulkheads, complex machined lids, & better preserves the integrity of the gasket. Slide-Loc Patent Pending Quick Release: 1) Simple with fast release and re-attachment. 2) Quality 316 stainless steel & anodized aluminum construction. 3) Consistent attachment pressure. 4) Eliminates shear force on gaskets. 5) Eliminates thread binding from swelling of nylon screws. 6) Simple pressure adjustment. 7) Adjustment tool built in. 8) Comfortable on the hands. 9) Utilizes tensioning force (stretching) vs. the less mechanically sound torsion force (rotating). 10) More forgiving on lining up parts. 11) Able to retrofit existing equipment. The competition... Nylon thumbscrews serve their purpose. They don't rust underwater and they are cheap. They are challenged by: 1) Slow & often inconvenient to use in tight spaces. 2) Swells from moisture can create difficulty in turning. 3) Breakage from torque (head separating). 4) Phillips & flathead drive heads stripping screw. 5) Difficulty attaining sufficient clamping force for effective gasket compression. 6) Inconsistent clamping pressure. 7) Painful on fingertips. 8) Lining up the holes right... we've all been there.

Personal tank update video.

As seen on Reef2Rainforest!🐠 Strong enough 💪 for large systems, compact enough for AIO back chambers. Best practice is to use the dosing lines for an auto water change or RO ATO. Dosing elements next to probes are best with our dedicated dosing holder. Small temp probes such as the Hydros or Inkbird fit in the Dosing Holder. 🌴Available at:🌴 @aquarium_specialty @newwaveaquaria www.Slide-Loc.com

Large order of double/single plug racks with extra strength magnets going out to @newwaveaquaria Sloped and ideal for back of the tank positioning. A strong rectangular magnet helps eliminate unwanted rotation & dumping of coral... as does our seamless channel locking system. www.Slide-Loc.com Patent Pending - All Rights Reserved

Patent pending design by Slide-Loc! Unlock the potential to place coral virtual anywhere and without having to worry about their size or loosing space by skipping holes. Black side for show, white side for added par on the sides of tanks.

Patent Pending Slide-Loc Quick Release Lever to replace thumbscrews!

Custom corner magnetic frag rack for @bobcats_reef on our patent pending channel locking design. Welcome to the summer 🔥 @slide_loc

Celebrating 5yrs with this system and introduced a pair of captive bred Australian harlequin tusk fish from The Biota Group to go with their goldflake angelfish. I was nervous about the small size in the past however, I've found introducing small fish to my established system has made aggression a non issue and smoothest for me, I believe, in 22yrs. They can also easily hide where the bigger fellas can't go, immediately losing interest. Their small size and captive bred will continue to be my preference for me in the future. Not a sponsorship, bought and paid like normal... just a hobbiest loving on my new little girls (o:

Slide-Loc presents the universal probe and dosing holders. Fits most AIO systems as well! Compatible with Neptune Apex, GHL, Inkbird, CoralVue Hydros, and more. Dosing hold is self sizing for a secure fit with soft or ridgid tubing of all the most common sizes. Probe holders include three slots for small temp probes, ATO, & AWC systems.

On display at MACNA 2022! Holds 2 probes and two dosing lines. Holds all temp probes and fits AIO chambers.

Diving with white sharks is one of the greatest things you can do... seek out adventure and enjoy. It's amazing to see these animals in person for what they are vs. the sensationalized versions often seen on the news and Discovery Channel. In this video my sister in law and myself convinced the rest of our family to come along! I'd suggest doing the same.

Tile-Loc by Slide-Loc LLC is a unique first of its kind adapter that allows stem-less coral tiles and disks to be mounted securely to a coral frag rack.

💥Black Friday unveiling💥 coming up, it's time to put the fun into reefing! First 50 orders will arrive before Christmas, shipping available worldwide.

Expand your mind to all the applications of our patents pending quick release lever. Www.Slide-Loc.com

💙Custom in tank display for Aquashella by Slide-Loc!💙 A time intensive layered 3D Logo & lettering made to glow, be sure to check it out in person!!! Super fun project to be apart of and excited for how it turned out. The display detaches from the base and the angle can be adjusted for optimum light capture.

The original Tile-Loc by Slide-Loc! www.Slide-Loc.com Secure your frag tiles (square or round) to your frag rack or mag rack an avoid critters, kids, and current pushing your expensive corals onto the sand graveyard. Made and engineered in the U.S.A.

Patent pending design by Slide-Loc! Pro Tip #4 www.Slide-Loc.com

Quick demonstration of the magnet strength for our small 9 plug magnetic frag rack. Most competitors can't easily be held like this! www.Slide-Loc.com

Creating precise, repeatable, & effective locking systems for coral frag plugs, probes, & dosing. Patents pending all rights reserved. Available through: @aquarium_specialty @bulkreefsupply @chaosaquaculture @newwaveaquaria @subculturecorals @worldwidecorals

"You are the only game in town so to speak, so well done!" - Brian Hess Brian used our quick release levers to improve his state of the art @ioptron_telescopes mount that pairs with telescopes and astrophotography cameras. Even a finely tuned $1,900 device can benefit! Patents pending,all rights reserved.

Patent pending design by Slide-Loc! Pro Tip #2 www.Slide-Loc.com

Patent pending design by Slide-Loc! Pro Tip #3 www.Slide-Loc.com