POD buildings powered by the Sun

Corin Smith sent me a video clip, which is the first part of this video, looks at nature from geometric and numerological perspect. I find it so important to combine it with a video we made earlier. Watch both parts. Enjoy!

OK, after discussing with Richard Nelson, the inventor of SolaRoof with 6 patents, I have compiled all the videos I can get into this one video. For the DIY project that Harvey Rayner of England did, it is documented as a 2004 project but I miss labeled it as 2006. I am glad that I have found videos showing works between 1973 and 1982. I am working on a story in words, describing how Richard first got the vision and later on got the ideas to take actions on it. More videos on new and ongoing projects will be updated on our site: https://pyrapod.com

This is recompiled with some images added to the beginning and ending of the original video made by Cedric Born. Thank Richard Nelson for guiding our inhouse designer Yang Zhou to do the frame work design based on which Cedric Born finished this wonderful visualization process. https://pyrapod.com

After digging out the problems, we show with solid proof a good alternative that was invented by Richard Nelson long times ago and a way to retrofit based on the existing framework. A wonderful DIY project for you start fresh or convert your existing greenhouse. More information at https://pyrapod.com

I have removed in this video the portion comparing the results of conventional Chinese style passive solar greenhouse and Richard Nelson's SolaRoof greenhouse. Too much information. If you need that comparison, please go to https://pyrapod.com/problems-with-traditional-greenhouses-how-to-retrofit-with-solaroof to see it. This video solely focuses on the conversion, i.e. how to do the retrofit. Once you fully understand how SolaRoof greenhouse works, then the next action is obviously how to build one yourself or how to retrofit it to your existing greenhouse. Do you stilll have the frames sitting there collecting dust and snow? Yes, you can reuse it. Watch this video and you will know how to do it with your existing one out there. Enjoy! We have a full line of new designs focusing on backyard use. They are much more beautiful than the Chines style. BTW, I am Chinese myself. No insult. Just objective comparison.

More info at: https://pyrapod.com/complete-line-of-designs-for-pyrapod-4-and-8-bubble-box-tower-tall-grande

這是我將兩個視頻合在一起而成的, 兩個都美幻絕倫, 但卻反差極大。看完後有什麽感想, 請留言, 以便彼此交流互動。

This is a newer version with voiceover and animation added. PyraPOD Global Inc thanks Richard Nelson for his chief technical guidance, Yang Zhou for his superb Sketchup design, Lawrence White for his magnetic voice prowess, and Cedric Born for his talented animation skills.

More info at this link: https://pyrapod.com/bubble-box-simplified-further-easier-to-test-solaroof-bubble-generator A small section on bubbles taken from this video on Bubble Run 2018: https://www.youtube.com/watch?v=TN5PEhI9CJ8 - thanks for the wonderful video made.

This is a larger version of PyraPOD8. Its top central section acts as a viewing platform with a roof that can move up and down.

This is a tent like greenhouse with double layer cavity filled with soap bubble foam that can be created and destroyed on demand. It take just a few minutes to fill the cavity and then the foam lasts quite a few hours before it is needed to fill again. It captures solar thermal energy during the day and insulates it to keep it warm.

OctaPOD is now called PyraPOD8 and CityPOD is now PyraPODx - more videos at https://pyrapod.com/bubble-videos/solaroof-in-videos

Continue to improve our first bubble generator in front of Tim Allen's Down To The Wire Welding shop, wearing his T-shirt. If you live in the Okanagan area, make sure to hire Tim as your welder! Tim's website: https://www.downtothewirewelding.com Our website: https://pyrapod.org

Glad to receive this visualization video from Cedric Born (founder of https://www.fennecfoundry.com​ and https://www.icone.media​ ) showing how PyraBox (Bubble Box), PyraShower (Bubble Shower), and PyraPOD4 Tall (P4T) are interchangable. The nice thing is, he found ways to animate how bubbles are produced in all three products and how bubble foam moves in P4T. Video wonderfully made and is short!

This video is the combination of the following three important videos, with the addition of current full line of modern designs: 1982 prototype built with a small sea container https://www.youtube.com/watch?v=Ac72YJnFFv0 1991 tent like prototype for backyard gardening https://www.youtube.com/watch?v=JyA8Km0Oe_E 1997 flat room prototype for large scale farming https://www.youtube.com/watch?v=karJ6uT40BU

PyraPOD8 with an octagon footing is sectioned into four quad panels and four X panels. This is especially useful with large scale build so that each panel can be serviced separately if there is a damage to the fabric.

This video shows what the finished product PyraPOD8 Grande will look like. Thanks to Ríkarður Leó Guðmundsson for making the video and to Angela Argentina who added the music.

More videos at https://pyrapod.com/bubble-videos

For now I will use it to test build the bubble generator and fine-tune it for optimized performance. In the future, this will be a LEARNING KIT for PyraPOD franchisees or salespersons to learn how everything works and also a DEMO KIT to show others how everything works. Learn more from our website: https://pyrapod.com

Richard and I are very excited to present this newest design to fill the GAP within the previous line of PODs: PyraPOD, PyraCAR and PyraLEV. With the gap filled with this new design, we now have the 4th one in the line: PyraTOPE, a floating. self-contained and self-sustained community center that opens the way for a new way of living. Everything is recyclable inside, leaving no footprint to the environment. This is future for today. This is prophesized thing to be realized with your participation. Are you ready? For all those prepers out there, this is what you need to pay attention on. Do the right thing, then no one can be left behind. A win-win scenario is right there. We can fake it in order to make it!

哈尔滨于彦国的水雾温室大棚, 从另外一个侧面印证了金豆荚肥皂泡大棚的功能, 详情见: https://pyrapod.com/zh

谢谢理查德.耐尔森（Richard Nelson）的全程指导, 周旸的精湛 Sketchup 绘图, 劳伦斯.怀特（Lawrence White） 的磁性解说，欧洲团队 Cedric Born 生动逼真的模拟技巧。了解更多请造访我们的网站: https://pyrapod.com/zh

This is an edited video recorded when attending a Zoom meeting started by Andrew Williams Jr, featuring Richard Nelson and I, talking about a very innovated and eco way to use SolaRoof/PyraPOD to solve the world hunger and food problems. More videos on this topic can be found on https://pyrapod.com which is a good place to contact us.

更多信息見我們 的 網 站 https://pyrapod.com/zh-tw

This video explains a major improvement on the design of the double layer cover for an all-climate backyard greenhouse by moving the bubble generators down from the top and placing them on the inside corners. This simple change makes everything so easy and tidy. To learn more about SolaRoof and its stories behind, please visite this website: https://pyrapod.org