WTFPerformance

The "quick and easy" Z31 project I picked up a few months back quickly spiraled into a nightmare of chasing a million small issues along with some major tune up jobs. All of that is a distant memory now after seeing how it sits today. It's still a rusty crusty 37 year old car... but now when I park the Z, I look back and see this fantastic page of 80s car history in all its glory. Then I unlock the doors with a key fob and jam to Gunship via Bluetooth hitting 7 furious pounds of boost all the way home.

I must have been pretty burnt out because I just realized I repeated myself like 3 times in this video LOL! Today I tackled upgrading all the burnt out bulbs in the digital dash, compass, G-force gauges, and climate controls. It looks so insane! I also proceeded to fry my new keyless entry box too, womp womp. The interior of the Z starts to go back together with some quick reupholstered door panels and we start to do the final reassembly. I'm so pumped on how the car is turning out! These babies just need some TLC and they come right back to life! Thanks for watching! Don't forget to hit that SUBSCRIBE button and follow me on instagram to see more of this Z plus get sneak peeks of progress on this and future project cars. Instagram.com/WTFPerformance

After we took 3 weeks off we are back in the garage with the 1985 Nissan 300ZX Turbo making some simple improvements that make old cars like this WAY more useable IRL. First up we add a door lock actuator and keyless entry kit. Next up we tackle the fuel level power source as it had a bad connection in the connector. Then I pretty much had to wire up a new head unit from scratch! I ran new speaker wires to all four corners and even had to grab power from the fuse box! Knowing how much gas you have, having some tunes, and easily locking the car when parked turn an old 80's car from a pain into a more useable functional car! Which means you can drive and enjoy them even more!

Finally got a legitimate test drive out of the Z! I had never done a FULL PULL in it till this video and it is finally running great! Thanks to fresh ball joints, inner and outer tie rod ends, pads and rotors front and back, timing belt, water pump, thermostat, plugs, wires, a battery, and a little love she is running better than ever! There is still a few gremlins to figure out, and a bunch of work left to do, subscribe to help us build the channel so we can keep bringing garbage cars back from the dead! Thanks for watching!

Thanks for checking out my 1985 300ZX Turbo, if you liked the video consider subscribing to the channel too! Let's blow up rumble with some good car content! With the Z misfiring under boost conditions there was obviously something wrong, I had the tune up parts already so I decided to throw some spark plugs and wires at it to see if that helped at all. I actually tracked down a torn hose on the charge pipe from the turbo to the throttle body. After that was done I was FINALLY able to get the Z out around the neighborhood and feel some boost building. It also exposed just how terribly it drives down the road, but we will tackle that in the next episode!

I have been waiting to drive my 1985 Nissan 300ZX Turbo! I finally get some fresh bucket seats bolted in along with some better tires for the front. And the last piece of the puzzle was a broken intake boot on the throttle body. I have learned a bunch more about the car, it needs ball joints, tie rod ends, brake pads/rotors, and misfires under boost... Tune up is next! Follow us on instagram: Joel - wtfperformance Linz - lindsayvillarreal9

The Z seemed to be the victim of having its T-Top smashed and stereo stolen at some point. Then worse than that, it was left outside for enough time to get plenty of water damage on the seats and carpeting. A quick wash and a ton of scrubbing later and the carpet looks marginally better...

After I got a round of parts ordered and delivered I can finally dig into this 1985 Nissan 300ZX TURBO (Z31). I started by getting immediately annoyed by the blown hatch and hood struts, so I got those installed in an easy few hours of fighting, cutting, and welding. After that I was able to get the car squeezed into the garage where we threw a new fuel pump on it, flush the fuel lines and get it fired up for the first time with its own fuel system. Follow us on instagram @ wtfperformance and lindsayvillarreal9

This project took us about 3 months of working on and off but the payoff is INSANE. These were the WORST 2 rooms in the house and now we can't even bring ourselves to putting the litter boxes back in there! Still one more bathroom to go...

The used car market has been insanely overpriced lately so when I saw this cheap 300ZX Turbo on Facebook I decided to jump on it! It was kind of last minute so I didn't pack any tools which ended up complicating things when the tire IMMEDIATELY blew out! It turned into quite a Roadkill style adventure.

Wow, I can't tell you how much work this bathroom was to finish! In this episode I cut out hours of footage to trim it down to only FORTY FIVE minutes, and I still had to break it into ANOTHER video! So enjoy part TWO of our bathroom and laundry room remodel! We tackle the electric and lighting, start some plumbing, prepped the floors, fix all the walls, and get the room painted!

Every remodel starts with tearing out the old garbage. This is very accurate when it comes to this TERRIBLE old bathroom and laundry room space. This was easily the biggest project we have tackled in our cheap old house to date! But the payoff of having two functional beautiful bathrooms will be SO sweet. Subscribe to see what we transform this space into!

If you are planning to LS swap your C3 Corvette, this is probably the cheapest oil pan setup you will find. The 5.3 truck pan is WAY too deep, it hangs like 6 inches under the frame crossmember and hits the factory steering parts. Swapping to this F-body pan gives us TONS more ground clearance and it now easily clears the factory steering arms. It will still bind up against the factory ram for the power steering. For now I will be running manual steering till I can get this thing running. If I figure out how to run the ram later I will update with the info. I hear this setup will work perfect with most Rack and Pinion conversions too!

I finally got the new garage properly set up for some work! We check out the improvements to the garage and I talk through some plans for the 1980 Chevy Corvette project. Make sure you subscribe so you don't miss getting this pile of corvette on the road!

I stuck the Corvette in storage before we moved and that is where it sat all winter long. Today we take the burro on a mission from God to retrieve the Corvette and get it back in the WTF:Garage.

We gather here today to join Engine and Transmission. I learned that you could bolt Nissan 6 speeds to ls engines and after hearing a friend talk about it for weeks I picked one up. I bought this one way before this project snow balled into essentially a full rebuild. They are supposedly good for about a 1000hp, they are cheaper than T-56's, and if you have ever driven a 350Z they shift REALLY good! Queue the G Force LS Z33 Adapter kit. I decided on this one because it seemed to be the most well thought out and designed kit. Other kits require cutting off the bellhousing from the trans and bolting a new one on with the oil pump bolts, and also usually require using a specialty clutch with a blend of components from Chevy and Nissan to work. The G Force kit includes a monster flywheel to fill the space between the engine and trans so using a factory style Nissan clutch is a huge advantage. I chose a stage 3 single disc from Advanced Clutch Technology to handle my 600ish horsepower goal. I was able to mount the drivetrain on the frame and then I had to pack the car up for storage, I temporarily ratchet strapped the body to the frame and put the car in storage while we were between houses. Next step will be to get the WTF:Performance Garage unpacked and set up so we can get this thing running!

We have had many gym memberships in the past and many variations of "home gyms" too. This extra bedroom just happens to have a super sturdy floor and used to house heavy machines, so it's the perfect spot for a small home gym. We already had the equipment we just needed a great place to put it, and the nicer the place the more you will want to spend time in it! I installed a TON of track lighting, painted the walls bright clean white and threw down some gym mats over the fresh flooring. We use a half rack, a set of dumbbells, a couple adjustable benches, and a treadmill to get all our basic workouts in. Keep an eye on Lindsay's channel and subscribe to catch some of her easy work outs soon! Lindsay's Rumble: https://rumble.com/c/c-1352002

No talking, just work. Today I assemble all the restored suspension parts and set the Corvette down on its own wheels again.

This is the REAL first episode of WTF:Performance! I have been wanting to focus on car content for over a decade and this is literally just the start! Introducing my 1980 Chevy Corvette project car. It started out as a parts car I bought for 1300 bucks in Michigan and hauled back to IL. It had a title and a bunch of good parts, but the frame was JUNK! I had been working on disassembly for a few months and had boxes of parts scattered around the garage. In this episode we start with a bare frame and a pile of crusty suspension parts. Let's get to work!

We finally got this room done! This was the biggest project room so far and with it complete we now have an actual guest room complete with its own secret hatch. Here is the Birdroom finale episode.

What's better, a useless box in a room or a secret trap door? Exactly. So in this episode we finally do something with the ugly bump in the floor. With the box out of the way we were able to finish the flooring, patch up the wall, finish the closet, AND we even through some curtains up to finish the room. Next week we address how we are going to conceal the literal hole in the room.

Now that the basic framing is done its time to add some wiring for lights and might as well add a few outlets while we are at it. I've never done drywall work before this but luckily there are a TON of great resources for advice and instruction on it already out there. I recommend "the drywall guys" as they dont actually explain much they are just BEAST professionals that do it all day every day and for some reason it gave me way more success to learn by watching rather than learn by thinking. Slapping up the drywall is the easy part, the next video will show the hard part, taping, mudding, and sanding. It's also the worst part! lol

This is the best way to build a closet for these two bedrooms I could come up with. First step is to cut out a doorway in the original wall, then we will build the basic structure in this video!

We start on a new room and finally solve the mystery of what this box thing is and why we are stuck with it. It is truly hilarious that I did not figure it out sooner just from thinking about it but there has been so much going on that I guess my brain was too fried and I was too excited to find something crazy in a mystery box lol

What I thought was a bad fuel pump turned into a nightmare of poking, prodding, and diagnosing for days what ended up being a bad ground in the fuel pump and tail light harness. 1995 Dodge Ram 1500 5.2 Symptoms: engine starts and dies after a second or two, very low to zero fuel pressure, and weird voltage readings at the fuel pump. Fix: Broken/corroded ground wires repaired near fuel pump.