LetsFigureThisOut

I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none. This video contains the following sightings: Historical Tic-Tac UFOs Gordon Cooper Statements & Experiences 1951 West Germany Attempted UFO Intercept 1957 UFO Landing at Edwards AFB Look for Michael Schratt books on Audible and at Amazon Please visit MUFON.org & COMUFON.org

I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none. This video contains the following sightings: More Otto Binder Reports Puerto Rico 1963 Catalina Island 1989 & 1992 Venezuela 1967 USS FDR (West of Italy) 1963 An Icebreaker off of Antarctica 1955 Near A Russian Typhoon Class Sub Little Pudding River 2021 Look for Michael Schratt books on Audible and at Amazon Please visit MUFON.org & COMUFON.org

I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none. This video contains the following sightings: Ryrie Idaho, 1967 Gravois Mills Missouri 1995 Reunion Island 1968 Liria Spain 1976 Fontfauret France 1977 Look for Michael Schratt books on Audible and at Amazon Please visit MUFON.org & COMUFON.org

I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none. This video contains the following sightings: Colusa CA 1979 Stigler OK 1961 Falcon Lake Canada Maracaibo Venezuela 1972 Long Island NY 1972 Look for Michael Schratt books on Audible and at Amazon Please visit MUFON.org & COMUFON.org

I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none. This video contains the following sightings: President Nixon / Jackie Gleason Meeting Wright Patterson AFB 1963 Great Lakes Naval Station 1963 Look for Michael Schratt books on Audible and at Amazon Please visit MUFON.org & COMUFON.org

I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none. This video contains the following sightings: Cape Girardeau MO 1941 Aztec NM 1948 Kingman AZ 1953 Look for Michael Schratt books on Audible and at Amazon Please visit MUFON.org & COMUFON.org

I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none. This video contains the following sightings: Otto Binder Reports Thessaloniki Greece 1967 Papua New Guinea 1959 Chicago O'Hare 2001 Temple OK 1966 Look for Michael Schratt books on Audible and at Amazon Please visit MUFON.org & COMUFON.org

I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none. This video contains the following sightings: Dana Point Danielson CT 1956 Finland 1970 Mobile Alabama 1983 USS Franklin D Roosevelt 1958 Look for Michael Schratt books on Audible and at Amazon Please visit MUFON.org & COMUFON.org

I spent 8 years as a field investigator for MUFON (Mutual UFO Network) and the presentation by Michael Schratt, for a visual guy like me, is second to none. Look for Michael Schratt books on Audible and at Amazon Please visit MUFON.org & COMUFON.org

I spent 8 years as a field investigator for MUFON (Mutual UFO Network). During the last couple of years our meetings were held online and we had a few incredible presenter. Unfortunately Curt was not one of them, but I found his interview to be very enlightening. There are a number of YouTube videos on the subject of UFOs, UAPs and USOs. This video is different and well worth the time. This is only a portion of the interview with Kevin Knuth. The entire interview can be found here: https://www.youtube.com/watch?v=atntnU_baHc&t=533s Curt Jaimungal's Channel: https://www.youtube.com/channel/UCdWIQh9DGG6uhJk8eyIFl1w How to support Curt Jaimungal: Patreon.com/curtjaimungal Please visit MUFON.org & COMUFON.org

It's winter and my heater doesn't work. I've had to make multiple early morning drives and it was tough. With no heat I also had no window defroster. I'm not a mechanic so my troubleshooting method was probably not the most direct, but in the end I found the problem and now have heat.

Cold weather coming in and I need to winterize the fifth wheel. I've winterized other RV's but not this one, so Let's figure this out.

Winter is coming and I want to put a float charger on my tractor.

I've never made a knife before, but was challenged to "get out of my comfort zone". So here is my first attempt at making a knife.

I'm getting ready to make the second of three knives. One of the limitations I have is the ability to accurately do a deep grind on the blade. I need to better utilize the tools I have. By adding the improved tool rest, I should be able to better control the grinding process

I've been interested in turning wood for a very long time. Life has finally slowed down enough so I can give it a try. Wood Lathe Selection Process by a Beginner This first video of a 4-part series will be about the selection process and how I decided on which lathe to buy. Here is a list of the lathes I considered: Laguna - MLAREVO 1836 - $2,800 Grizzley - G0462-16" x 46" - $1,142 Delta - 46-460 - $660 Jet - JWL-1440VSK - $1,700 Jet - JET JWL-1221VS - $850 Wen - 3424 - $320 Rikon - 70-220VSR - $595 Here is the list of additional equipment I purchased: Lathe - $660 Chuck - $150 Drill Chuck - $33 Legs - $186 Tools - $175 Face Shield - $29 Center Finder - $7 CA Glue - $11 Forstner Bit Set - $60 Forstner Bit Extension - $15 Total - $1,326

I want to make a seam ripper for a gift, but to do so, you sort of need to know how to turn a pen. To turn a pen, you will need a number of specialized pieces of equipment and hardware. Since I didn't know where to start I went to Rockler (not a sponsor) and asked a few questions. I was very happy to discover Rockler (not a sponsor) has a pen turning kit which contain everything I needed to turn a pen and some of the stuff I need for the seam ripper. This video is my experience using the Rockler Beginner's Pen Turning Kit.

I've had this old Harbor Freight portable generator around for years. Every now and then I need it and when I'm done, I have to de-fuel it otherwise it may not start when I need it. By converting it to a tri-fuel (Gasoline, Propane & Natural Gas) I can have a bottle of propane ready all the time as I won't have to worry about it going bad like gasoline. Here are the parts I used for a 3000 watt . Your generator may require different parts, but this will get you headed in the right direction and not suffer the delays I had while waiting for additional parts. I bought most of these parts from Amazon and I don't get anything from you buying these parts. Just copy and search each one. Tri-Fuel Conversion Kit: Nature Gas Propane Tri Fuel Conversion Carburetor Kit for Predator Harbor Freight 3200 4000 Watts Gas Generator. Adjustable Pressure Regulator: GasOne 2109-RED 4 ft High Pressure 0-20 I Adjustable Regulator with Red QCC-1 Type Hose-Works with Newer U.S. Propane Tanks. Brass Hose Adapter: Anderson Metals - 07004-0606 Brass Hose Fitting, Connector, 3/8" Barb x 3/8" Male Flare (Fits the above regulator)

For my next knife I want to be able to have the same grind line on both sides of the knife. I saw this tool on the Simple Little Life YouTube Channel and wanted to try and make it myself. https://www.youtube.com/c/SimplelittlelifeCa https://www.youtube.com/watch?v=gM5RZx2EKg0

I replaced the driver's side door handle last year and did it the traditional way in which you pull the door panel off. This time I wanted to try something different. I saw a video by Jerry Williams where he claims to be able to change the door handle in under 13 minutes. Well, he did. Here is the link to the video: https://www.youtube.com/watch?v=XKTjbh82L3k&t=196s

Ever since I bought this van, I've had to open the sliding door with 2 hands. As you can image this is very annoying when you're carrying something. The first thing I did was to inspect for broken parts or parts with excessive wear. Not finding anything obvious, I starting spraying everything with a lubricant. Much to my surprise, this solved the problem.

While looking for a noise that I thought was an rear axle bearing, I found a pretty good exhaust leak.

I usually don't drive my 1997 GMC Safari at night. The other night we were coming home from the airport and were taking backroads which have no street lighting. The headlights on the van were awful. It appeared only the passenger headlight was working but when we got home I check and both were working. Well, sort of. The driver's side headlight was considerable dimmer.

This seam ripper was made with Bethlehem Olive Wood - From Bethlehem, The Holy Land. The Olive Wood Tree is a subtropical, broad=leaved, evergreen tree, which has edible fruit. The tree ranges in height from 10-25 feet or more and has numerous branches. In October, the trees are pruned and the wood is sold to craftsman. Many of these trees are over 300 years old and some have been growing since the time of Christ. No trees were damaged or destroyed during the process of harvesting the Olive Wood. Seam Ripper Kit: PKSR2 7mm Pen Mandrel (Various) 8mm Drill Bit: PKPARK-8MM 8mm Barrel Trimmer: PKTRIMKIT 3pc Bushing Set: PKSRBU

This is not a "How To" video. This is just me adjusting my Delta 46-460 drive belt tensioner.