HOW TO MAKE A MULTIFUNCTIONAL TABLE WITH ROTATING DRAWER - STEP BY STEP (1)
Creating a multifunctional table with a rotating drawer can be a fun and rewarding DIY project. Here's a step-by-step guide to get you started:
Step 1: Gather Materials and Tools
Materials:
Wooden board or panel for the tabletop
Wooden boards for the table legs and frame
Wooden dowels or metal rods for the rotating mechanism
Drawer slides
Screws
Wood glue
Drawer handle
Sandpaper
Stain or paint (optional)
Tools:
Saw (circular saw, jigsaw, or handsaw)
Drill and drill bits
Screwdriver
Measuring tape
Pencil
Wood clamps (optional)
Wood router (optional, for decorative edges)
Step 2: Design the Table
Decide on the dimensions and design of your table. Consider the size of the tabletop, the height and width of the legs, and the overall aesthetic you want to achieve. Sketch out your design on paper, including the placement of the rotating drawer.
Step 3: Cut the Wood
Using a saw, cut the wooden boards to the desired dimensions for the tabletop, legs, and frame according to your design. If you're adding decorative edges to the tabletop or legs, use a wood router to create them.
Step 4: Assemble the Frame
Assemble the frame of the table by attaching the legs to the tabletop using screws and wood glue. Use a square to ensure that the legs are positioned at right angles to the tabletop for stability.
Step 5: Install Drawer Slides
Attach drawer slides to the underside of the tabletop and inside the frame according to the size of your drawer. Make sure the slides are level and aligned properly to allow the drawer to slide smoothly.
Step 6: Construct the Drawer
Build the drawer using wooden boards cut to the appropriate size. Assemble the drawer box using wood glue and screws, then attach the drawer bottom. Install the drawer handle on the front of the drawer.
Step 7: Create the Rotating Mechanism
Cut wooden dowels or metal rods to the length of the drawer width. Drill holes in the drawer sides and frame to accommodate the dowels or rods, ensuring that they are evenly spaced and aligned. Insert the dowels or rods into the holes to create the rotating mechanism.
Step 8: Sand and Finish
Sand all surfaces of the table and drawer to smooth out any rough edges or imperfections. Apply stain or paint to the wood as desired, following the manufacturer's instructions. Allow the finish to dry completely before proceeding.
Step 9: Final Assembly
Attach the drawer to the drawer slides inside the frame of the table. Test the rotation of the drawer to ensure that it moves smoothly without obstruction. Make any necessary adjustments to the rotating mechanism or drawer slides.
That's the first part of the process! Let me know if you're ready for the next steps or if you need further details on any of these steps.
-
6:36
Peter von Panda
1 year agoIs The Husky 27" 11-Drawer Rolling Tool Cabinet Any Good?
20 -
6:36
Peter von Panda
1 year agoIs The Husky 27" 11-Drawer Rolling Tool Cabinet Any Good?
20 -
13:07
MarisReviewChannel
1 year agoNatuBeau Side Table Nightstand with Built In Drawer
10 -
21:53
Bourbon Moth Woodworking
3 years ago $0.01 earnedBuild Cabinets The Easy Way | How to Make Drawer Faces
74 -
15:35
BunkiesWoodworking
10 months agohow to make cabinet / drawer handles
21 -
0:49
Pinefinders
9 months agoSquare Pine Coffee Table With Turned Legs And A Drawer (Y4006A) @PinefindersCoUk
4 -
5:15
BradyHommelWoodworks
1 year agoDIY Easy drawer box assembly in 5 minutes! - How To
6 -
19:11
Dailey Woodworks
2 years ago $0.01 earnedWooden Drawer Slides - Make Your Own
101 -
23:22
Dailey Woodworks
3 years ago $0.03 earnedCorner Cabinet Build - How to Build Kitchen Cabinets Part 2 of 9 - Step-by-Step Tutorial
108 -
25:20
RyanHawkins
1 year ago $0.03 earnedBuilding a Dining Table Entirely out of Pallet Wood
53